I curently run Systemimager 3.0.0 on numerous HP Proliant DL380 G3's witthout a problem. They
use e1000 nic driver and cciss(Smart Array 5i) diriver when booting from floppy. I have loaded
RH EL 3 with the latest updated.
I recently acquired newer DL380 G4 servers(Smart Array 6i and tg3 nics)
Thanks for the reply Seth ... I was beginning to think there was no one on the list.
The floppy/cd boots correctly and bombs exactly as you show below.
- from the shell at that point a lsmod does not show cciss loaded.
- /dev/cciss... does not exist.
- I would attempt to load ccisss.o if I
I curently run Systemimager 3.0.0 on numerous HP Proliant DL380 G3's witthout a problem. They
use e1000 nic driver and cciss(Smart Array 5i) diriver when booting from floppy. I have loaded
RH EL 3 with the latest updated.
I recently acquired newer DL380 G4 servers(Smart Array 6i and tg3 nics)
/tune2fs successfully
but the mount will always fail with No such device
Ideas
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3050
Email: [EMAIL PROTECTED]
- Forwarded by David Livingstone/LIVING03/CNR
Thanks Steve.
Yes I should have also mentioned that I had also received a bunch(100s) of
insmod : unresolved symbol n messages before the mke2fs. If I check in the
install script there is a :
modprobe ext2
modprobe ext3
To prove this I commented out these lines and attempted a boot from cd.
and Communications
10229 127 Avenue floor 2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3050
Email: [EMAIL PROTECTED]
- Forwarded by David Livingstone/LIVING03/CNR/CA on 2005/09/12 15:18 -
Seth Haines [EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
2005/09/08 12:15
Please respond
2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3050
Email: [EMAIL PROTECTED]
- Forwarded by David Livingstone/LIVING03/CNR/CA on 2005/09/12 15:18 -
Seth Haines [EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
2005/09/08 12:15
Please respond to sisuite-users
and Communications
10229 127 Avenue floor 2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3050
Email: [EMAIL PROTECTED]
- Forwarded by David Livingstone/LIVING03/CNR/CA on 2005/09/12 15:18 -
Seth Haines [EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
2005/09/08 12:15
Please
Scott,
I've run into the same problem with using a boot cd with 3.4.1 - Not sure if the code
has changed since then but the only way I could get it to work was booting from cd and having
the local.cfg file on a floppy. Obviously what you would like is to be able to have a local.cfg
on the cd.
Remove the LABEL's from the fstab(ie hard code the devices for boot, home etc)
and you should be okay.
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3050
Email: [EMAIL PROTECTED]
Timothy J. Wielgos
Using UYOK and 3.7.6 I successfully imaged and loaded a RHES 4
machine(DL380G4) without any major
issues. I did however run into pronlems when subsequently attemping to
install an rpm(see below for
error). I tracked the error to a getxattr call for security.selinux.
Disabling selinux avoids
Andrea,
Find below the autoinstallscript.conf.
What appears to have happended is that /selinux was imaged and then
propagated to the
new machine. By removing /selinux files, creating /.autorelabel and
rebooting /selinux was
properly mounted and 'fixfiles relabel' was run.
As you can see
Yes I have removed the /selinux/* from the image however I'm waiting for
some new
machines to try again.
I agree that adding the patterns would be the fast solution.Of course the
best solution
would be to have mount/mtab show all mounts ... I could open a ticket
with RH however
I'm not
Andrea,
Are the pseudo filesystem exclusions for si_getimage going ahead and did
they make it to 3.8.0 ? Checked the
changelog and I don't see any mention of it.
Thanks
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax :
Andrea,
Thanks for the reply.
What options do I have ?
- Try and boot using the standard(included) kernel ?
- Try an boot using a uyok from a similar machine using a 2.6 kernel. Will
this
work ?
- Build from source on the 2.4 machine. This looks like the cleanest
solution. I have
Andrea,
Thanks for the reply.
I used the standard image and this was successful.
All our machines are HP Proliant DL/ML servers with Smart Array
controllers(ie /dev/cciss). We currently have a mix of RHEL3/4 with
the RHEL3 machines using the 2.4 kernel.
[EMAIL PROTECTED] wrote:
I am currently PXE booting HP Proliant servers with systemimager 3.9.6
and while
the imaging is successful I have no logging on the server.
The systemimager server is a HP Proliant DL380G4 running the latest RH
ES 4.
On the server I use si_mkdhcpserver I specified the log server and the
Bryan,
Thanks for the information ... now I see that man si_monitor does give
:
Clients must have defined the MONITOR_SERVER (and optional MONITOR_PORT)
as boot parameters to enable the monitoring feature.
Is this documented anywhere else ?
Thanks
David K Livingstone
CN Signals and
Andrea,
I've read all the responses and there are merits to both 1 and 2 as well
as Bernard Li's response.
- My vote goes for 2.
- should not have binaries availble which are broken and this will
fix the current problem without introducing any
other issues.
- option 1
Of course I had already loaded 4.0.0 on my image server and as of today
was looking at loading a machine(RH ES 4).
I will download the pre-release packages and test.
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780
Patch applied and yes this solves the problem. Have not yet had a chance
to image
to a client.
Thanks
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3050
Email: [EMAIL PROTECTED]
Andrea Righi [EMAIL
Bernard Li bern...@vanhpc.org wrote on 2009/07/09 15:36:21:
Hi Jim:
On Thu, Jul 9, 2009 at 1:10 PM, jimi o'beirnejimobei...@gmail.com
wrote:
Thank you. Unfortunately, I don't think moving my entire /var/lib dir
to the
external hard drive is an option I'd like to take on. Far too much
Is there a timeframe to have ext4 support ?
Thanks
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Walker Operations East Building
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3046
Email: david.livingst...@cn.ca
by David Livingstone/LIVING03/CNR/CA on 2012/12/18 16:00
-
From:
David Livingstone/LIVING03/CNR/CA
To:
sisuite-users@lists.sourceforge.net
Date:
2012/03/29 09:41
Subject:
Loading RHEL 6.2 using 4.1.99.svn4556_bli-1
Using systemimager 4.1.99.svn4556_bli-1(ext4 enabled version) I have
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Walker Operations East Building
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3046
Email: david.livingst...@cn.ca
- Forwarded by David Livingstone/LIVING03/CNR/CA on 2012/12/18 16:00
-
From:
David
Second attempt after the first one bounced due to size ...
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Walker Operations East Building
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3046
Email: david.livingst...@cn.ca
- Forwarded by David Livingstone
Olivier,
Thanks ! I will download and test on rhel 6.x). BTW I am currently using
your previous build(4.3.0-0.2 std kernel only) on rhel 6.x with the
restrictions
we have corresponded about.
David
David K Livingstone
CN Signals and Communications
10229 127 Avenue floor 2
Walker Operations
floor 2
Walker Operations East Building
Edmonton, AB, T5E 0B9
Ph : 780 472-3959 Fax : 780 472-3046
Email: david.livingst...@cn.ca
- Forwarded by David Livingstone/LIVING03/CNR/CA on 2013/04/05 16:40
-
From:
David Livingstone/LIVING03/CNR/CA
To:
sisuite-users@lists.sourceforge.net
Date
by David Livingstone/LIVING03/CNR/CA on 2013/04/17 15:14
-
From:
david.livingst...@cn.ca
To:
sisuite-users@lists.sourceforge.net
Date:
2013/04/10 15:56
Subject:
Re: [sisuite-users] beta7 bug fixed = beta8 WAS: systemimager 4.3.0-0.7
available for testing
Olivier,
Thanks. That does it. I still
://ftp.free.fr/mirrors/fedora.redhat.com/fedora/linux/releases/20/Fedora/x86_64/os/images/pxeboot/initrd.img
Best regards,
Olivier.
--
Olivier LAHAYE
CEA DRT/LIST/DIR
De : David Livingstone [david.livingst...@cn.ca]
Date d'envoi : jeudi 23 janvier 2014 21:24
À
/pxeboot/initrd.img
Best regards,
Olivier.
--
Olivier LAHAYE
CEA DRT/LIST/DIR
De : David Livingstone [david.livingst...@cn.ca]
Date d'envoi : jeudi 23 janvier 2014 21:24
À :
sisuite-users@lists.sourceforge.netmailto:sisuite-users@lists.sourceforge.net
Objet
Olivier - Looks great ! Let me know when you have something to test - I'm still
using RHEL 6.
Thanks
From: LAHAYE Olivier [mailto:olivier.lah...@cea.fr]
Sent: Monday, January 26, 2015 4:06 AM
To: sisuite-users@lists.sourceforge.net
Subject: [sisuite-users] SystemImager NG: it works :-)
Hi,
Olivier - Thanks. Up to this point we are still using RHEL6 which as you know
we have working from previous releases. When I attempt the new packages I will
let all know.
Thanks again
David
-Original Message-
From: LAHAYE Olivier [mailto:olivier.lah...@cea.fr]
Sent: Wednesday, April
d deps, creates
> repo) for all distros)
>
> Envoyé de mon iPhone6+
>
> > Le 28 juin 2017 à 18:01, David Livingstone <david.livingst...@cn.ca>
> > a écrit :
> >
> > Olivier,
> >
> > Okay finally had a change to try and load below on rhel 6.4.
Olivier,
Okay finally had a change to try and load below on rhel 6.4. From the
http://svn.oscar.openclustergroup.org/repos/unstable/ link below I've gotten to
the following :
[root@scdev1 2017]# rpm -ivh --test
systemimager-x86_64boot-standard-4.5.0-0.20170614git.el6.noarch.rpm
35 matches
Mail list logo