Re: [sisuite-users] Kernel panic on boot on DELL R720
Hello, I have not thought that I could install an old kernel and update the drivers. It works for me. Regards. Le 13/03/2014 08:54, Pierre BLONDEAU a écrit : Ok, I understand, no problem. Why did you not use an existent live system ( like systemrescuecd ) with some simple customization to be able to run master script ? It's just to know if there is a technical reason and not waste time trying. Regards Le 12/03/2014 19:24, LAHAYE Olivier a écrit : Ok, the good news is that you can boot. The initrd generation in systemimager is broken since the beginning as it assumes that the kernel includes from the build OS have the same structures as the includes shipped with the kernel that is built for the initrd. In the past, that was the case, most supported distros were using kernel-2.6, unfortunately, now we have distros that still use kernel-2.6 (rhel-6) and distros that uses kernel 3.X (fedora-17+, ...) and thus it becomes a problem when building things like lvn that uses kernel structure. They uses the build OS structure, but runs on the psecific kernel that has different structures from the build OS. Thus lvn have problems (crash, freezes, ...). I did my best to patch the initrd component build to use as much as I can the most relevant includes, but there are some cases where it is not possible unfortunately. I'm working on a full rewrite of the initrd template generation by using dracut. Using dractu would remove the need to use kernels that are different from the build os while keeping the advantage to support latest hardwares. The build time would be greatly reduced (no need to build a kernel and many components. The build would be reduced to specific components like bittorent client and a few other things. More over, the libs, kernel structures and binaries would be in siync each together, thus far more stable. I've started testing and I'm able to build a next-gen initrd, but I'm still unable to boot it normally as it uses systemd and I haven't yet written the logic for that (easy). I'm currently extremely buzy at preparing an OSCAR Cluster release for rhel6. Then I'l concentrate on fixing systemImager initrd template. I hope to have somethign ready before summer. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : mercredi 12 mars 2014 18:50 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Hello, I made some others test. A Debian wheezy 64bits netinstall or an Ubuntu 12.04 LTS 64 bits netinstall work fine. For me a I take the default Debian kernel and initrd from the installation and i use it with PXE. The process stop when the init process try to find root partition. All is OK because i haven't changed the PXE cmdline to boot normally. So, I tried to take this kernel and one initrd created by si_prepareclient on this fresh installation. I have exactly the same problem of /init not found. I think the problem, is in the generating of the initrd but i don't know how to debug it. I have updated the BIOS. Have you an other idea ? Regards Le 11/03/2014 10:00, LAHAYE Olivier a écrit : Then I would try rhel6 netinstall or fedora20 netinstall the rhel6 kernel is often well tested by DELL. I would also try t-o install latest BIOS. As a last resort I would call DEeLL support, maybe you have an hardware bug, or maybe a BIOS config bug that is listed in a knowledge base. Best regards, Olivier. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : lundi 10 mars 2014 19:09 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Le 10/03/2014 11:39, Pierre BLONDEAU a écrit : Hy, Thank you for the answer. The ubuntu's server kernel point to linux-image-3.2.0-60-generic, i have tried it ( and double check now to be sure ). I see in the page that i must use a kernel at least 3.8 for Intel's E5-2600v2 precessor. But i have aslo tried linux-image-generic-lts-raring - 3.8.0.37.37 and linux-image-generic-lts-saucy - 3.11.0.18.17 . Did you say i should try the installer kernel ( from the netinst ) as pxe kernel ? Hy, I have tried with the netinstall kernel and i have the same kernel panic less the call trace: Freeing unused kernel memory : 836k () Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Have you a other idea ? Regards Regards Le 10/03/2014 10:07, LAHAYE Olivier a écrit : I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU
Re: [sisuite-users] Kernel panic on boot on DELL R720
Ok, I understand, no problem. Why did you not use an existent live system ( like systemrescuecd ) with some simple customization to be able to run master script ? It's just to know if there is a technical reason and not waste time trying. Regards Le 12/03/2014 19:24, LAHAYE Olivier a écrit : Ok, the good news is that you can boot. The initrd generation in systemimager is broken since the beginning as it assumes that the kernel includes from the build OS have the same structures as the includes shipped with the kernel that is built for the initrd. In the past, that was the case, most supported distros were using kernel-2.6, unfortunately, now we have distros that still use kernel-2.6 (rhel-6) and distros that uses kernel 3.X (fedora-17+, ...) and thus it becomes a problem when building things like lvn that uses kernel structure. They uses the build OS structure, but runs on the psecific kernel that has different structures from the build OS. Thus lvn have problems (crash, freezes, ...). I did my best to patch the initrd component build to use as much as I can the most relevant includes, but there are some cases where it is not possible unfortunately. I'm working on a full rewrite of the initrd template generation by using dracut. Using dractu would remove the need to use kernels that are different from the build os while keeping the advantage to support latest hardwares. The build time would be greatly reduced (no need to build a kernel and many components. The build would be reduced to specific components like bittorent client and a few other things. More over, the libs, kernel structures and binaries would be in siync each together, thus far more stable. I've started testing and I'm able to build a next-gen initrd, but I'm still unable to boot it normally as it uses systemd and I haven't yet written the logic for that (easy). I'm currently extremely buzy at preparing an OSCAR Cluster release for rhel6. Then I'l concentrate on fixing systemImager initrd template. I hope to have somethign ready before summer. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : mercredi 12 mars 2014 18:50 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Hello, I made some others test. A Debian wheezy 64bits netinstall or an Ubuntu 12.04 LTS 64 bits netinstall work fine. For me a I take the default Debian kernel and initrd from the installation and i use it with PXE. The process stop when the init process try to find root partition. All is OK because i haven't changed the PXE cmdline to boot normally. So, I tried to take this kernel and one initrd created by si_prepareclient on this fresh installation. I have exactly the same problem of /init not found. I think the problem, is in the generating of the initrd but i don't know how to debug it. I have updated the BIOS. Have you an other idea ? Regards Le 11/03/2014 10:00, LAHAYE Olivier a écrit : Then I would try rhel6 netinstall or fedora20 netinstall the rhel6 kernel is often well tested by DELL. I would also try t-o install latest BIOS. As a last resort I would call DEeLL support, maybe you have an hardware bug, or maybe a BIOS config bug that is listed in a knowledge base. Best regards, Olivier. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : lundi 10 mars 2014 19:09 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Le 10/03/2014 11:39, Pierre BLONDEAU a écrit : Hy, Thank you for the answer. The ubuntu's server kernel point to linux-image-3.2.0-60-generic, i have tried it ( and double check now to be sure ). I see in the page that i must use a kernel at least 3.8 for Intel's E5-2600v2 precessor. But i have aslo tried linux-image-generic-lts-raring - 3.8.0.37.37 and linux-image-generic-lts-saucy - 3.11.0.18.17 . Did you say i should try the installer kernel ( from the netinst ) as pxe kernel ? Hy, I have tried with the netinstall kernel and i have the same kernel panic less the call trace: Freeing unused kernel memory : 836k () Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Have you a other idea ? Regards Regards Le 10/03/2014 10:07, LAHAYE Olivier a écrit : I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : vendredi 7 mars 2014 17:24 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Kernel panic on boot
Re: [sisuite-users] Kernel panic on boot on DELL R720
Hello, I made some others test. A Debian wheezy 64bits netinstall or an Ubuntu 12.04 LTS 64 bits netinstall work fine. For me a I take the default Debian kernel and initrd from the installation and i use it with PXE. The process stop when the init process try to find root partition. All is OK because i haven't changed the PXE cmdline to boot normally. So, I tried to take this kernel and one initrd created by si_prepareclient on this fresh installation. I have exactly the same problem of /init not found. I think the problem, is in the generating of the initrd but i don't know how to debug it. I have updated the BIOS. Have you an other idea ? Regards Le 11/03/2014 10:00, LAHAYE Olivier a écrit : Then I would try rhel6 netinstall or fedora20 netinstall the rhel6 kernel is often well tested by DELL. I would also try t-o install latest BIOS. As a last resort I would call DEeLL support, maybe you have an hardware bug, or maybe a BIOS config bug that is listed in a knowledge base. Best regards, Olivier. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : lundi 10 mars 2014 19:09 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Le 10/03/2014 11:39, Pierre BLONDEAU a écrit : Hy, Thank you for the answer. The ubuntu's server kernel point to linux-image-3.2.0-60-generic, i have tried it ( and double check now to be sure ). I see in the page that i must use a kernel at least 3.8 for Intel's E5-2600v2 precessor. But i have aslo tried linux-image-generic-lts-raring - 3.8.0.37.37 and linux-image-generic-lts-saucy - 3.11.0.18.17 . Did you say i should try the installer kernel ( from the netinst ) as pxe kernel ? Hy, I have tried with the netinstall kernel and i have the same kernel panic less the call trace: Freeing unused kernel memory : 836k () Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Have you a other idea ? Regards Regards Le 10/03/2014 10:07, LAHAYE Olivier a écrit : I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : vendredi 7 mars 2014 17:24 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Kernel panic on boot on DELL R720 Good After Noon, We recently purchased a DELL R720. Network cards in this machine are too recent for our old kernel. It's a personalise ubuntu 2.6.32 with maximum of module. We had compiled the version 1.6.2 of the e1000e driver's . This version is too old for our machine. This kernel boot correctly, but the installation plant during the network configuration. So we tried with kernels 3.X after have patched si_prepareclient. We tested a lot of combinations: - Kernel : 3.2, 3.8 and 3.11 ( lts ubuntu ) - si_prepareclient patched by us or that present in the 4.3 beta on http://svn.oscar.openclustergroup.org/repos/unstable/ We also tried the kernel and initrd provided by systemimager-boot-amd64-standard: - 4.1.99.svn4556yaubert - http://download.systemimager.org/debian/pool/main/s/systemimager/ - 4.3 - http://svn.oscar.openclustergroup.org/repos/unstable/debian-7-x86_64/Early At the begining, we have a kernel panic that looks like: Freeing unused kernel memory: 532k freed Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Pid: 1, comm: swapper/0 Not tainted 3.7.5-boel_v4.3.0 #1 Call Trace: [8134bbb1] panic+0xb6/0x1b5 [81340640] ? rest_init+0x70/0x70 [81340736] kernel_init+0xf6/0x100 [8135192c] ret_form_fork+0x7c/0xb0 [81340640] ? rest_init+0x70/0x70 We tried disabling a maximum of kernel's arguments and increase the size of ramdisk in PXE's command line but it does not change : LABEL systemimager KERNEL u64/new/kernel APPEND initrd=u64/new/initrd.img root=/dev/ram ramdisk_size=100 Do you have an idea ? Thanks in advance. Regards -- -- Pierre BLONDEAU Administrateur Systèmes réseaux Université de Caen Laboratoire GREYC, Département d'informatique tel : 02 31 56 75 42 bureau : Campus 2, Science 3, 406 -- -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download
Re: [sisuite-users] Kernel panic on boot on DELL R720
Ok, the good news is that you can boot. The initrd generation in systemimager is broken since the beginning as it assumes that the kernel includes from the build OS have the same structures as the includes shipped with the kernel that is built for the initrd. In the past, that was the case, most supported distros were using kernel-2.6, unfortunately, now we have distros that still use kernel-2.6 (rhel-6) and distros that uses kernel 3.X (fedora-17+, ...) and thus it becomes a problem when building things like lvn that uses kernel structure. They uses the build OS structure, but runs on the psecific kernel that has different structures from the build OS. Thus lvn have problems (crash, freezes, ...). I did my best to patch the initrd component build to use as much as I can the most relevant includes, but there are some cases where it is not possible unfortunately. I'm working on a full rewrite of the initrd template generation by using dracut. Using dractu would remove the need to use kernels that are different from the build os while keeping the advantage to support latest hardwares. The build time would be greatly reduced (no need to build a kernel and many components. The build would be reduced to specific components like bittorent client and a few other things. More over, the libs, kernel structures and binaries would be in siync each together, thus far more stable. I've started testing and I'm able to build a next-gen initrd, but I'm still unable to boot it normally as it uses systemd and I haven't yet written the logic for that (easy). I'm currently extremely buzy at preparing an OSCAR Cluster release for rhel6. Then I'l concentrate on fixing systemImager initrd template. I hope to have somethign ready before summer. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : mercredi 12 mars 2014 18:50 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Hello, I made some others test. A Debian wheezy 64bits netinstall or an Ubuntu 12.04 LTS 64 bits netinstall work fine. For me a I take the default Debian kernel and initrd from the installation and i use it with PXE. The process stop when the init process try to find root partition. All is OK because i haven't changed the PXE cmdline to boot normally. So, I tried to take this kernel and one initrd created by si_prepareclient on this fresh installation. I have exactly the same problem of /init not found. I think the problem, is in the generating of the initrd but i don't know how to debug it. I have updated the BIOS. Have you an other idea ? Regards Le 11/03/2014 10:00, LAHAYE Olivier a écrit : Then I would try rhel6 netinstall or fedora20 netinstall the rhel6 kernel is often well tested by DELL. I would also try t-o install latest BIOS. As a last resort I would call DEeLL support, maybe you have an hardware bug, or maybe a BIOS config bug that is listed in a knowledge base. Best regards, Olivier. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : lundi 10 mars 2014 19:09 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Le 10/03/2014 11:39, Pierre BLONDEAU a écrit : Hy, Thank you for the answer. The ubuntu's server kernel point to linux-image-3.2.0-60-generic, i have tried it ( and double check now to be sure ). I see in the page that i must use a kernel at least 3.8 for Intel's E5-2600v2 precessor. But i have aslo tried linux-image-generic-lts-raring - 3.8.0.37.37 and linux-image-generic-lts-saucy - 3.11.0.18.17 . Did you say i should try the installer kernel ( from the netinst ) as pxe kernel ? Hy, I have tried with the netinstall kernel and i have the same kernel panic less the call trace: Freeing unused kernel memory : 836k () Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Have you a other idea ? Regards Regards Le 10/03/2014 10:07, LAHAYE Olivier a écrit : I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : vendredi 7 mars 2014 17:24 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Kernel panic on boot on DELL R720 Good After Noon, We recently purchased a DELL R720. Network cards in this machine are too recent for our old kernel. It's a personalise ubuntu 2.6.32 with maximum of module. We had compiled the version 1.6.2 of the e1000e driver's
Re: [sisuite-users] Kernel panic on boot on DELL R720
Then I would try rhel6 netinstall or fedora20 netinstall the rhel6 kernel is often well tested by DELL. I would also try t-o install latest BIOS. As a last resort I would call DEeLL support, maybe you have an hardware bug, or maybe a BIOS config bug that is listed in a knowledge base. Best regards, Olivier. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : lundi 10 mars 2014 19:09 À : sisuite-users@lists.sourceforge.net Objet : Re: [sisuite-users] Kernel panic on boot on DELL R720 Le 10/03/2014 11:39, Pierre BLONDEAU a écrit : Hy, Thank you for the answer. The ubuntu's server kernel point to linux-image-3.2.0-60-generic, i have tried it ( and double check now to be sure ). I see in the page that i must use a kernel at least 3.8 for Intel's E5-2600v2 precessor. But i have aslo tried linux-image-generic-lts-raring - 3.8.0.37.37 and linux-image-generic-lts-saucy - 3.11.0.18.17 . Did you say i should try the installer kernel ( from the netinst ) as pxe kernel ? Hy, I have tried with the netinstall kernel and i have the same kernel panic less the call trace: Freeing unused kernel memory : 836k () Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Have you a other idea ? Regards Regards Le 10/03/2014 10:07, LAHAYE Olivier a écrit : I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : vendredi 7 mars 2014 17:24 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Kernel panic on boot on DELL R720 Good After Noon, We recently purchased a DELL R720. Network cards in this machine are too recent for our old kernel. It's a personalise ubuntu 2.6.32 with maximum of module. We had compiled the version 1.6.2 of the e1000e driver's . This version is too old for our machine. This kernel boot correctly, but the installation plant during the network configuration. So we tried with kernels 3.X after have patched si_prepareclient. We tested a lot of combinations: - Kernel : 3.2, 3.8 and 3.11 ( lts ubuntu ) - si_prepareclient patched by us or that present in the 4.3 beta on http://svn.oscar.openclustergroup.org/repos/unstable/ We also tried the kernel and initrd provided by systemimager-boot-amd64-standard: - 4.1.99.svn4556yaubert - http://download.systemimager.org/debian/pool/main/s/systemimager/ - 4.3 - http://svn.oscar.openclustergroup.org/repos/unstable/debian-7-x86_64/Early At the begining, we have a kernel panic that looks like: Freeing unused kernel memory: 532k freed Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Pid: 1, comm: swapper/0 Not tainted 3.7.5-boel_v4.3.0 #1 Call Trace: [8134bbb1] panic+0xb6/0x1b5 [81340640] ? rest_init+0x70/0x70 [81340736] kernel_init+0xf6/0x100 [8135192c] ret_form_fork+0x7c/0xb0 [81340640] ? rest_init+0x70/0x70 We tried disabling a maximum of kernel's arguments and increase the size of ramdisk in PXE's command line but it does not change : LABEL systemimager KERNEL u64/new/kernel APPEND initrd=u64/new/initrd.img root=/dev/ram ramdisk_size=100 Do you have an idea ? Thanks in advance. Regards -- -- Pierre BLONDEAU Administrateur Systèmes réseaux Université de Caen Laboratoire GREYC, Département d'informatique tel : 02 31 56 75 42 bureau : Campus 2, Science 3, 406 -- -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech ___ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech
Re: [sisuite-users] Kernel panic on boot on DELL R720
I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : vendredi 7 mars 2014 17:24 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Kernel panic on boot on DELL R720 Good After Noon, We recently purchased a DELL R720. Network cards in this machine are too recent for our old kernel. It's a personalise ubuntu 2.6.32 with maximum of module. We had compiled the version 1.6.2 of the e1000e driver's . This version is too old for our machine. This kernel boot correctly, but the installation plant during the network configuration. So we tried with kernels 3.X after have patched si_prepareclient. We tested a lot of combinations: - Kernel : 3.2, 3.8 and 3.11 ( lts ubuntu ) - si_prepareclient patched by us or that present in the 4.3 beta on http://svn.oscar.openclustergroup.org/repos/unstable/ We also tried the kernel and initrd provided by systemimager-boot-amd64-standard: - 4.1.99.svn4556yaubert - http://download.systemimager.org/debian/pool/main/s/systemimager/ - 4.3 - http://svn.oscar.openclustergroup.org/repos/unstable/debian-7-x86_64/Early At the begining, we have a kernel panic that looks like: Freeing unused kernel memory: 532k freed Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Pid: 1, comm: swapper/0 Not tainted 3.7.5-boel_v4.3.0 #1 Call Trace: [8134bbb1] panic+0xb6/0x1b5 [81340640] ? rest_init+0x70/0x70 [81340736] kernel_init+0xf6/0x100 [8135192c] ret_form_fork+0x7c/0xb0 [81340640] ? rest_init+0x70/0x70 We tried disabling a maximum of kernel's arguments and increase the size of ramdisk in PXE's command line but it does not change : LABEL systemimager KERNEL u64/new/kernel APPEND initrd=u64/new/initrd.img root=/dev/ram ramdisk_size=100 Do you have an idea ? Thanks in advance. Regards -- -- Pierre BLONDEAU Administrateur Systèmes réseaux Université de Caen Laboratoire GREYC, Département d'informatique tel : 02 31 56 75 42 bureau : Campus 2, Science 3, 406 -- -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech ___ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
Re: [sisuite-users] Kernel panic on boot on DELL R720
Hy, Thank you for the answer. The ubuntu's server kernel point to linux-image-3.2.0-60-generic, i have tried it ( and double check now to be sure ). I see in the page that i must use a kernel at least 3.8 for Intel's E5-2600v2 precessor. But i have aslo tried linux-image-generic-lts-raring - 3.8.0.37.37 and linux-image-generic-lts-saucy - 3.11.0.18.17 . Did you say i should try the installer kernel ( from the netinst ) as pxe kernel ? Regards Le 10/03/2014 10:07, LAHAYE Olivier a écrit : I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : vendredi 7 mars 2014 17:24 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Kernel panic on boot on DELL R720 Good After Noon, We recently purchased a DELL R720. Network cards in this machine are too recent for our old kernel. It's a personalise ubuntu 2.6.32 with maximum of module. We had compiled the version 1.6.2 of the e1000e driver's . This version is too old for our machine. This kernel boot correctly, but the installation plant during the network configuration. So we tried with kernels 3.X after have patched si_prepareclient. We tested a lot of combinations: - Kernel : 3.2, 3.8 and 3.11 ( lts ubuntu ) - si_prepareclient patched by us or that present in the 4.3 beta on http://svn.oscar.openclustergroup.org/repos/unstable/ We also tried the kernel and initrd provided by systemimager-boot-amd64-standard: - 4.1.99.svn4556yaubert - http://download.systemimager.org/debian/pool/main/s/systemimager/ - 4.3 - http://svn.oscar.openclustergroup.org/repos/unstable/debian-7-x86_64/Early At the begining, we have a kernel panic that looks like: Freeing unused kernel memory: 532k freed Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Pid: 1, comm: swapper/0 Not tainted 3.7.5-boel_v4.3.0 #1 Call Trace: [8134bbb1] panic+0xb6/0x1b5 [81340640] ? rest_init+0x70/0x70 [81340736] kernel_init+0xf6/0x100 [8135192c] ret_form_fork+0x7c/0xb0 [81340640] ? rest_init+0x70/0x70 We tried disabling a maximum of kernel's arguments and increase the size of ramdisk in PXE's command line but it does not change : LABEL systemimager KERNEL u64/new/kernel APPEND initrd=u64/new/initrd.img root=/dev/ram ramdisk_size=100 Do you have an idea ? Thanks in advance. Regards -- -- Pierre BLONDEAU Administrateur Systèmes réseaux Université de Caen Laboratoire GREYC, Département d'informatique tel : 02 31 56 75 42 bureau : Campus 2, Science 3, 406 -- -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech ___ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- -- Pierre BLONDEAU Administrateur Systèmes réseaux Université de Caen Laboratoire GREYC, Département d'informatique tel : 02 31 56 75 42 bureau : Campus 2, Science 3, 406 -- smime.p7s Description: Signature cryptographique S/MIME -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech___ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
Re: [sisuite-users] Kernel panic on boot on DELL R720
Le 10/03/2014 11:39, Pierre BLONDEAU a écrit : Hy, Thank you for the answer. The ubuntu's server kernel point to linux-image-3.2.0-60-generic, i have tried it ( and double check now to be sure ). I see in the page that i must use a kernel at least 3.8 for Intel's E5-2600v2 precessor. But i have aslo tried linux-image-generic-lts-raring - 3.8.0.37.37 and linux-image-generic-lts-saucy - 3.11.0.18.17 . Did you say i should try the installer kernel ( from the netinst ) as pxe kernel ? Hy, I have tried with the netinstall kernel and i have the same kernel panic less the call trace: Freeing unused kernel memory : 836k () Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Have you a other idea ? Regards Regards Le 10/03/2014 10:07, LAHAYE Olivier a écrit : I would suggest to use this release for the deployment server: http://www.ubuntu.com/certification/hardware/201205-10987/ and the enable use your own kernel. This may help. Best regards. -- Olivier LAHAYE CEA DRT/LIST/DIR De : Pierre BLONDEAU [pierre.blond...@unicaen.fr] Envoyé : vendredi 7 mars 2014 17:24 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Kernel panic on boot on DELL R720 Good After Noon, We recently purchased a DELL R720. Network cards in this machine are too recent for our old kernel. It's a personalise ubuntu 2.6.32 with maximum of module. We had compiled the version 1.6.2 of the e1000e driver's . This version is too old for our machine. This kernel boot correctly, but the installation plant during the network configuration. So we tried with kernels 3.X after have patched si_prepareclient. We tested a lot of combinations: - Kernel : 3.2, 3.8 and 3.11 ( lts ubuntu ) - si_prepareclient patched by us or that present in the 4.3 beta on http://svn.oscar.openclustergroup.org/repos/unstable/ We also tried the kernel and initrd provided by systemimager-boot-amd64-standard: - 4.1.99.svn4556yaubert - http://download.systemimager.org/debian/pool/main/s/systemimager/ - 4.3 - http://svn.oscar.openclustergroup.org/repos/unstable/debian-7-x86_64/Early At the begining, we have a kernel panic that looks like: Freeing unused kernel memory: 532k freed Failed to execute /init Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Pid: 1, comm: swapper/0 Not tainted 3.7.5-boel_v4.3.0 #1 Call Trace: [8134bbb1] panic+0xb6/0x1b5 [81340640] ? rest_init+0x70/0x70 [81340736] kernel_init+0xf6/0x100 [8135192c] ret_form_fork+0x7c/0xb0 [81340640] ? rest_init+0x70/0x70 We tried disabling a maximum of kernel's arguments and increase the size of ramdisk in PXE's command line but it does not change : LABEL systemimager KERNEL u64/new/kernel APPEND initrd=u64/new/initrd.img root=/dev/ram ramdisk_size=100 Do you have an idea ? Thanks in advance. Regards -- -- Pierre BLONDEAU Administrateur Systèmes réseaux Université de Caen Laboratoire GREYC, Département d'informatique tel : 02 31 56 75 42 bureau : Campus 2, Science 3, 406 -- -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech ___ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech ___ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- -- Pierre BLONDEAU Administrateur Systèmes réseaux Université de Caen Laboratoire GREYC, Département d'informatique tel : 02 31 56 75 42 bureau : Campus 2, Science 3, 406 -- smime.p7s Description: Signature cryptographique S/MIME -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their
