The FTP client built into my Mac is able to connect to ftp servers that live
behind a pfSense 1.2.3 box no problem, but the built-in FTP client on my
Windows XP SP3 box able to do directory listings on the same servers no matter
if PASV or EPSV is set on the client before making the directory
When installing the Country Block package and enabling it, I receive the
following error message:
pfctl: warning: namespace collision with global table.
What can I do to resolve this error?
Thanks,
Jason
-
To unsubscribe, e-mail
I'm using 1.2.3 with country block 0.2.0, forgot to mention that.
Thanks,
Jason
On 04/08/2011 08:39 AM, Jason Brown wrote:
When installing the Country Block package and enabling it, I receive the
following error message:
pfctl: warning: namespace collision with global table.
What can I do
I have a pair of 1.2.3 boxes and I'm having some issues that have manifested
themselves as an inability to send emails with attachments depending on the IP
of the mail server the message is being sent to.
Setup:
Host A is on interface LAN.
Host A is supposed to get NAT translated once it leaves
We currently use PFSense as a perimeter firewall it does all of our NAT as
well. We recently ran out of public ip's and had another subnet issued to
us. The problem is whether I add a new interface or set it up as a static
route we can't get it to be reachable from outside. I know I am missing
I thought so, but that does not seem to work either.
Jason James
Technology Department
School District of Milton
608-868-9570 ext 1082
-
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail
I apologize, this actually had nothing to do with pFsense. It ended up
being an internal issue with acl's on our core.
-
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail:
I have not worked with Asterisk or SIP at all, but it sounds like what you need
is a combination of sipproxd to get past the NAT issues and some sort of load
balancer like SER or Ultra Monkey to round-robin (or whatever) the two Asterisk
servers. So that you'd wind up with:
asterisk1 -*
on different hardware and have so far (knock on wood) been
up for a couple of weeks now.
Jason
-
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available
that can't find gif
5 datagrams with bad address in header
Any ideas as to the cause of the errors or better yet recommendations
for possible solutions?
Thanks.
Jason
-
To unsubscribe, e-mail: support-unsubscr
swapping out the WAN ethernet cable for a new one, and did
connect this new cable directly to our edge switch (rather than via
the patch panels - to try and rule out a cable issue.)
On Wed, Mar 24, 2010 at 8:18 PM, David Burgess apt@gmail.com wrote:
On Mon, Mar 22, 2010 at 7:15 PM, Jason Stuart
I know this has been asked several times and I have searched but came up
with no solid answers. We're running PFsense as our FW + Squid as a web
cache for a fairly large school district. We're migrating away from our
paid content filtering solution and are looking at Dans guardian. I
realize that
AD is not really a deal breaker for us, bypass accounts/page is however.
Jason James
Technology Department
School District of Milton
608-868-9570 ext 1082
-
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
So, the current squid/squidguard package can or cannot be used in
conjunction with AD. IE: High school students able to access social
networking sites based on their group but Elementary being blocked.
Jason James
Technology Department
School District of Milton
608-868-9570 ext 1082
Is there an Easy Button for allowing inbound traceroute (traceroute
sourced from the WAN) in pfSense other than creating two rules on the
WAN side that permit inbound ICMP as well as inbound UDP source port
range 33434 to 33534 to destination port range 33434 to 33534?
On 26-Dec-08, at 4:33 PM, Paul Mansfield wrote:
Jason Lixfeld wrote:
When I tried a failover last night, everything failed over properly
but
all my active sessions had to be terminated and restarted (SSH,
Remote
Desktop). OpenVPN didn't fail over either. It timed out and
automatically
On 26-Dec-08, at 5:30 PM, Scott Ullrich wrote:
On Fri, Dec 26, 2008 at 5:28 PM, Jason Lixfeld
jason-lists.pfse...@lixfeld.ca wrote:
[snip]
Well, kinda. As far as the OS is concerned it's a dedicated NIC.
It's
running inside an ESXi VM so it's a VLAN on a trunk as far as
VMWare
On 26-Dec-08, at 6:02 PM, Chris Buechler wrote:
On Fri, Dec 26, 2008 at 5:44 PM, Jason Lixfeld
jason-lists.pfse...@lixfeld.ca wrote:
The incorrect hash stuff I don't have an explanation for.
Where you show that, it's coming up as a backup, which means that
message is normal.
Ok, so just
On 26-Dec-08, at 6:31 PM, Scott Ullrich wrote:
On Fri, Dec 26, 2008 at 6:06 PM, Jason Lixfeld
jason-lists.pfse...@lixfeld.ca wrote:
Ok, so just so I'm not chasing a wild good, the failover is
supposed to be
stateful, right? Sessions in or out of a pfSense cluster shouldn't
be
disconnected
On 26-Dec-08, at 7:16 PM, Chris Buechler wrote:
Sounds like multicast isn't always getting passed between the two
systems.
That sounds plausible. How would I go about testing that? I did a
quick check by establishing an inbound connection through the master
hoping it would replicate
When I tried a failover last night, everything failed over properly
but all my active sessions had to be terminated and restarted (SSH,
Remote Desktop). OpenVPN didn't fail over either. It timed out and
automatically reconnected (but still...). Am I wrong in that pfSense
failover is
Hello, and happy holidays!
I have an ESXi server installed with the 1.2.1-RC2 VM upgraded to RC4
up and running. Everything has been working as expected, but then I
tried to setup outbound NAT to a virtual IP and everything stopped:
I've configured a Virtual IP on the WAN side which is on
Rodis
Integrita Systems LLC
-Original Message-
From: Jason Lixfeld [mailto:jason-lists.pfse...@lixfeld.ca]
Sent: Monday, December 22, 2008 8:04 AM
To: support@pfsense.com
Subject: [pfSense Support] Outbound NAT to Virt. IP issues. Maybe
it's the
config, maybe it's VMWare ESXi?
Hello
Okay... if I understand correctly, now it seems you are able to see the
authentication screen. But once authenticated, you still don't get out.
Try turning off MAC checking in pfSense's captive portal setup.
- Jason
From: ram [mailto:[EMAIL PROTECTED]
Sent
the NAT (a bit more work, and ram may not know how to set it up).
- Jason
-Original Message-
From: sai [mailto:[EMAIL PROTECTED]
Sent: Monday, July 28, 2008 12:12 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] PF and UT not working
how is your network setup?
1 PC ---switch
It is likely that they are doing as I do... Use pfSense for firewall and
VPN, while using Untangle for strictly filtering purposes (web, mail,
etc) and not firewalling.
- Jason
-Original Message-
From: RB [mailto:[EMAIL PROTECTED]
Sent: Friday, July 25, 2008 8:36 AM
To: support
ram,
This is a bit of a shot in the dark, but try turning off services in
Untangle... until they are all off. It may be that one of them (like
the Intrusion Detection module) is detecting something it doesn't like.
- Jason
From: ram [mailto:[EMAIL PROTECTED
to mid Feb) to test a different box.
- Jason
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
No. It will stay hung indefinitely.
When I choose FreeBSD with ACPI disabled, I get a Fatal Trap 12: Page
fault while in kernel mode
right after the pci bus (pci4) starts to load.
--Jason W. Allen
-Original Message-
From: Chris Buechler [mailto:[EMAIL PROTECTED]
Sent: Wednesday
Success,
While fooling around and trying to get the boot menu to come up, So I could
try Chris' suggestion, I removed the /boot/loader.conf from the dive and
viola the thing will now boot.
Now I have to determine what in there the system doesn't like.
--Jason W. Allen
-Original Message
.
- Jason
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
: Monday, December 03, 2007 1:59 PM
To: support@pfsense.com
Subject: Re: RE: [pfSense Support] Snort
On 12/3/07, Jason J. Ellingson [EMAIL PROTECTED] wrote:
Most excellent.
However (the ungrateful scum I am), now snort will not start at all...
the error is:
php: : Snort will not start. You must
Is there a way to change the IP monitored by the quality graphs? I know
it uses the gateway, but that is a router next to the pfSense box. I'd
rather it check the head from my ISP.
- Jason
-
To unsubscribe, e-mail: [EMAIL
Just tried out Snort on 1.2RC3...
So far, so good... just a couple of notes:
pfSense doesn't like:
dos.rules - multiple ports listed:
[135,137,138,139,445]
-and-
scan.rules - UDP protocol
So I disabled those for now.
Let's see how it goes...
- Jason
Fuchs, Martin wrote:
-Ursprüngliche Nachricht-
Von: news [mailto:[EMAIL PROTECTED] Im Auftrag von Jason Jordan
Gesendet: Mittwoch, 17. Oktober 2007 05:49
An: support@pfsense.com
Betreff: [pfSense Support] Squid Query
I want to add some custom directives to the squid.conf, but when I do
box added to the squid
web console?
Cheers, Jason
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
to figure out the problem, and it was
something very small.
I'll let you know what I find.
--Jason W. Allen
mailto:[EMAIL PROTECTED] [EMAIL PROTECTED]
Director of System Solutions
MPGis Inc.
2223 Dutch Gold Dr.
Lancaster, PA 17601
Tel. 717-481-8660 Ext. 207
Fax 717-481-8661
Cel. 717-917-8812
).
I have also put attached the Ipsec Logs. They are giving me the same exact
errors as before.
I've wiped out and rebuilt this solution 20 times over the last few days and
I need to get something working soon.
Thanks for all your help.
--Jason W. Allen
-Original Message-
From: Holger
I have my Vonage box (made by LinkSys) on OPT1 and told it to
use DHCP. After it got its first IP (10.2.10.199), I clicked on the box to
set the DHCP to a static IP of 10.2.10.200.
I get a log full of this...
Nov 15 08:29:30
dhcpd: DHCPREQUEST for 10.2.10.200 from
the package, but that didn't help.
I also tried different modes (ac, lowmem, and sparseband)
Is there something I can run to help figure this out?
- Jason
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e
it. Works.
- Jason
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Friday, October 27, 2006 12:10 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] pfsense - Speed up SNORT blocked rules
page?
I fixed this recently. Reinstall snort.
On 10/27/06, Darren
disabled status of those same rules.
My ramblings on the subject anyhow
- Jason
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Sunday, August 06, 2006 5:05 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] interface deletion breaks pf.conf rules
On 8/6/06
Reboot any switches along with the routers and machines... I've seen
switches hold on to ARP entries for an looong time.
Just my 2 cents worth.
- Jason
-Original Message-
From: Derrick MacPherson [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 27, 2006 4:33 PM
To: support@pfsense.com
-- the other way works fine).
- Jason
-Original Message-
From: mOjO [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 26, 2006 3:13 AM
To: support@pfsense.com
Subject: [pfSense Support] Vonage vs. Bittorrent (QoS question)
the epic struggle continues...
i have Cable internet with a 8mb
the OPT1 FTP Proxy? Perhaps the proxy is resending
the packet out the WAN using the pfSense WAN IP and not the external IP in
the 1:1 NAT that it should. Sound right? It would explain why the client
isn't seeing it... The packet is coming from the wrong IP.
- Jason
Both pfSense boxes are using 4-08-2006 snapshot. I'll give the sync
command a try.
- Jason
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 11, 2006 3:21 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] Passive FTP - sorry
This was fixed
and
I could move more people from PPTP to IPSec.
- Jason
-Original Message-
From: Peter Curran [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 30, 2006 8:53 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] Static routes over IPSec
This problem is caused because IPsec tunnel mode
to gateway of 192.168.1.1 (remote LAN gateway), but
that didn't seem to work.
Thanks all!
- Jason
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
another cheap NIC and another cheap hub for
the job? Thanks for help.
Jason
Hi Holger,
Thank you for quick reply.
So do I have to actually add a physical NIC, and assign another internal ip
and subnet for it, and then put rules to allow in firewall?
Jason
- Original Message -
From: Holger Bauer [EMAIL PROTECTED]
To: support@pfsense.com
Sent: Monday
to still provide both
passive and active connections to internet connecting users.
Jason J Ellingson
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e
...
Jason J Ellingson
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 31, 2006 10:15 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] FTP and Tunnels
This was fixed after beta 1 (1:1
page... The demos toss out scripting errors.
Maybe I bitch too much, but if I don't, you guys may not ever know the
problem exists.
- Jason
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Monday, January 16, 2006 12:07 PM
To: support@pfsense.com
Subject: Re
I don't remember.
We are using 4801 boxes because of space and cost
limitations.
Jason
J Ellingson615.301.1682 : nashville612.605.1132 :
minneapoliswww.ellingson.com[EMAIL PROTECTED]
From: Robert Goley [mailto:[EMAIL PROTECTED
for printing from the USB port on a Seokris
4801 will receive CASH reward (via PayPal or Check or small unmarked
bills... your pick).
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED
... which requires all the MAC addresses to be
listed in this table.
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED]
-Original Message-
From: Bill Marquette [mailto:[EMAIL
(before):
?php endif; ?
?php include(fend.inc); ?
Code (after):
?php endif; ?
/center
?php include(fend.inc); ?
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED
Since the pages are using IE7... do you plan to update from IE7 version
0.7.3 (alpha) to IE7 version 0.9 (alpha)?
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED
.
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED]
-Original Message-
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Monday, October 31, 2005 10:39 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] bug in 0.89.2
On 10/31
debug this?
The PC is a standard generic Pentium II - 233 MHz with 256MB RAM. One Intel
NIC, one SIS NIC.
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED]
-Original Message
on all
other pages.
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED]
-Original Message-
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Monday, October 31, 2005 8:16 AM
, it is there...
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
.
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands
and restarting it fixes the problem.
Also, it seems to also catch FTP connections going over the IPSec tunnel.
Shouldn't it only catch connections going over NAT (LAN-WAN)?
Jason J Ellingson
615.301.1682 : nashville
612.605.1132
allowing the connection through.
Jason J Ellingson
615.301.1682 : nashville
612.605.1132 : minneapolis
www.ellingson.com
[EMAIL PROTECTED]
-Original Message-
From: jonathan gonzalez [mailto:[EMAIL PROTECTED]
Sent: Monday, October
it
myself these days. Would be great stuff for a tutorial ;-)
Holger
-Ursprüngliche Nachricht-
Von: Jason Landry [mailto:[EMAIL PROTECTED]
Gesendet: Dienstag, 18. Oktober 2005 13:35
An: pfsense
Betreff: [pfSense Support] Any way to do a scheduled ping to a host?
I'm using IPSec
Hi,
I've created a site-to-site IPSec tunnel between my home and office.
At home I'm using the latest pfsense, 0.86.4, and at work, m0n0wall.
I used the basic instructions in the tutorial.
The home network is 10.53.x.x/24, the work network is 192.168.x.x/24.
Both are NAT'ed.
At home I have a
I'll try the suggestions when I get home tonight.
Thanks for the help.
Jason
On 10/10/05, Bill Marquette [EMAIL PROTECTED] wrote:
I don't have a box in front of me right now, but from memory, try setting
the MTU in the WAN screen - if I remember right, that'll force PF to do MSS
fixups
, and the tunnel would connect
automatically, but Remote Desktop and SQL didn't work.
Now that I've changed the MTU, I can't get to 192.168.1.1, but Remote
Desktop and SQL both work.
Is this just the nature of the beast?
On 10/10/05, Jason Landry [EMAIL PROTECTED] wrote:
No, I'm just doing site
error: not well-formed (invalid token) at line 60
Jason
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Note: I'm resending this because I'm not sure it actually got through
the first time. Been having that problem with gmail on occassion.
Currently running 0.73.6
I've actually had this same problem since 68.x, but have just not
reported it. If I try to install squid, i get the following:
I've actually had this same problem since 68.x, but have just not
reported it. If I try to install squid, i get the following:
Downloading package configuration file... done.
Saving updated package information... done.
Downloading squid and its dependencies... done.
Checking for successful
the job better:
http://www.snortsam.net/
http://sourceforge.net/projects/packetfence/
Give it some time and you'll see something like that in pfsense or at least
as an installable package :-)
Holger
-Ursprüngliche Nachricht-
Von: Jason Landry [mailto:[EMAIL PROTECTED]
Gesendet
73 matches
Mail list logo