Hi,
I get installed the last embedded release 0.78 on a WRAP 1E board and
now all the minor webgui problem related to status==interfaces are
ok. Wonderful!! After that I tried to connect by SSH to pfsense after,
of course, have enabled it in System==advanced but I cannot log in:
it says ...no
What SSH client are you using? Is it configured for 'keyboard-interactive' ?
--Bill
On 8/20/05, Giorgio Ducci [EMAIL PROTECTED] wrote:
Hi,
I get installed the last embedded release 0.78 on a WRAP 1E board and
now all the minor webgui problem related to status==interfaces are
ok. Wonderful!!
Fleming, John (ZeroChaos) wrote:
I'd also like to know which rl cards these are. Can you send the output
of pciconf -lv?
Glad to oblige
[EMAIL PROTECTED]:9:0: class=0x02 card=0x13011186 chip=0x13001186 rev=0x10
hdr=0x00
vendor = 'D-Link System Inc'
device = 'DL 10038C or
The specific command I ran was iperf -i 1 -N -d -P3 -c 192.168.0.1 -
from the options on my Gentoo box, -d says it does a bidirectional test
simultaneously, testing (I presumed) duplex.
ah yeah, it is full duplex with that option. I assumed you were doing
nothing but a -c and -s.
rl's
Chris Buechler wrote:
hah Well...that's probably the best you can get on that. :) With rl
NIC's at least, since they're interrupt happy.
Wow. That was certainly it. Ran top and showed 0% idle CPU with over
70% interrupt dedicated to interrupts and ~25% system. I knew the RL
NICs were
