Re: [Elphel-support] combining frames
Hi Andreas, But the sensor doesn't give the full field then, does it? If I got it right it starts at the starting row and column and shows a window with the specified width and height. Yes Yes that's the mode I'm speaking of. Scaling the full field to 1296x960 and then combining the frames together. Clear. I'll add scaling to 10359_controls. Is it very difficult to implement the alternating A+B / C+D memory buffering? Because its important to have the frames taken at the same time. Since buffering of A+B and read-out of C+D and vice versa can happen at the same time a framerate of 22fps should be possible. Can you try that? That would be great. They are taken at the same time (from the same trigger). While one going through directly, another is being buffered and after the first frame is done the read from the buffer starts. And as 1296x960 allows ~44fps the vertical doubling will make it twice less. Oleg ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] mage Noise problem
Dear Kaien, First, can you please provide us with the following info: go to http://camera-ip/index.php?site=camerasetup/setup.php then click on Status Report and send it to us. If FPGA Version is 3534010 then get other version of x353.bit from here: http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/fpga/x3x3/x353.bit?view=log (either revision 1.3 or 1.1.1.1 - any should work) Then just copy it via ftp to /etc folder and reboot the camera. Oleg Elphel, Inc. ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Camera issue
Dear Salvador, I hope you got the CF connector board, or getting it really soon. Happy travelings, let us know when you come back if you've got the board and were able to put it in and use. Thanks, Olga ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] Focusing issue
Dear Ángel, Did you get an adapter ring from us? You might have removed it with the plastic front cover. Like this one: http://www.avsupply.com/details/vm400.shtml Do you have to unscrew the lens when the ring is installed? Best regards, Oleg ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] UDP Image server
Leonardo, Andrey answered your questions already. Two more things: 1. Do you still need the 10359 board? (your questions make me think you don't =) ) 2. We haven't received the payment for the camera from your company. Could you please verify that? Oleg ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Using the RJ14 port to trigger a camera fla
Dear Peter, I couldn't find much documentation on this part is how do I trigger the camera internally? It should work after you set TRIG=0x4 have TRIG_CONDITION=0x0. The period is set by TRIG_PERIOD. And you're right - for the camera to generate the output pulse you need to set TRIG_OUT=0x80. Best regards, Oleg Dzhimiev ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] hi
Hi Vineeth, a. Try ping -w 1 -b 192.168.0.255 - if the camera has some other ip you w ill probably get it. When I test cameras I usually assign them ips from 192 .168.0.160 to .169. b. As your camera has usb then it should have a phone socket on the side (under a small cover) and also you should have all the cables allowing you to connect your PC's usb to that phone socket (as we usually ship them).The n use minicom - 115200 8N1. Best regards, Oleg Dzhimiev ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] Request for video surveillance-distribution sys
Dear Osman, thank you for your interest in Elphel products I will forward your request to our technical team for their recommendations. Please excuse a long wait for the reply as we are participating in 3 conferences for the open source products almost simultaneously and our staff is stretched. Best Regards, ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] technical doubts about our purchase
Carlos, energizer xp18000 Worked for us. Was even enough to power an external HDD. ... is it still possible to be exchanged after that for another lens? or is a fixed modification of the camera? Yes, it is possible to change the lens to any other with C/CS/M12 mount. Assembly of that lens includes an C/CS-M12 adapter and spacers to make it fixed focused to infinity. Nothing is glued. If you meant Sunex SuperFisheye EFL=1.3mm, F/2.0, M12 mount, here's a sample - http://community.elphel.com/pictures/hammer_camera/elphelimg_2421643.jpeg (2 in 1). The resolution is not perfect. i read carefully all info about 12v it in the wiki (and talk page) and I come to understand that the 12-volt adapter is not enough to power the camera and hard drive. Well, we tested a 12V camera with HDD not too long ago - it works but it doesn't have enough power for extra boards (was instable with an extra MUX board and 2 sensor boards). In general there might be problems if the voltage drops below 12V - cables are too long or extra boards (mentioned above). The setup you need should work fine with at least 15ft network cable. ¿you can't provide an appropiated adaptor? We could try to look for a 'better' adapter and order it from somewhere, I think. if not, how many amps should provide the adapter to work safely with this configuration? Our current power supply is 12V, 1.5A. Best regards and a happy new year too =), Oleg Dzhimiev ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] technical doubts about our purchase
Hello Carlos and Simon, we have received the payment and your order is ready for shipment. I would like to explain some details regarding the lenses you have selected. We have assembled the camera with the M12 Sunex Super Fisheye lens, with the specuial adapter, and we had to remove the IR cut-off filter from the camera, because this lens already has IR cut-off filter and the assembly does not fit if we have this filter installed on the camera. For the 3Mpix lens we have attached the IR cut-off filter to the lens, with UV glue. Please be careful with this lens, not to scratch the filter, as it is exposed. When changing lenses, please remove the M12 lens together with it's adapter, as a whole assembly. Thank you for your order, I will send you the confirmation number for tracking the shipment. Best Regards, ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] Fw: Elphel support
Hello, in the field of PIV using Elphel camera of sensor type: MT9P001. Could you please send me the standard values of the camera that can work in the best form. The standard values that I mean are the best values shown in the attached picture (left side of the attached image). The attached image appears to be broken unfortunately. Could you please resend or share it somewhere? The default camera values usually work ok. Auto Exposure and W/B are on by default as well. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc. ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] [Elphel-support-Eyesis] TKIC-01974 Visual Safety
Dear Marcos, we have all the parts for 2 more stereo cameras, so this time the shipping can be done in just 2 weeks from the time of the order. Unfortunately, it is not possible to position the sensors vertically in the stereo application, since the disparity must happen over the horizontal direction, because the CMOS sensors scan each line of the image at different time. We will answer more to this question on the mailing list later today. Best Regards, ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Ordering stereo camera
Hello Elham, all camera models made with 3D-printed parts are just examples of the possible configurations. We offer our clients the freedom to modify the camera configuration based on their needs and application. The camera with 4 sensors can be arranged in any way you will design it. The example Inline camera has a fixed baseline of 250mm, but it can be larger, limited only by the cable length. The longest cable we offer is 450 mm. We are working on the waterproof camera body for the H-camera, not the Inline camera. The 4 image sensors are synchronized and are taking images simultaneously. The lens we offer is Evetar, N125B04530WR1 with EFL=4.5mm, the focus is fixed on infinity. http://www3.elphel.com/accessories You can also choose your own lens (C or CS mount, or M12 mount). Best Regards, ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] 353 Problem Mainboards
Linden, > I have a /dev/ttyUSB0 > that registered when the USB to serial is plugged in so good up to that > point. Have minicom setup as follows: > Bps/Par/Bits: 115200 8N1 > Hardware Flow Control: No > Software Flow Control: No Looks correct. > Then I assume I just start minicom and it should start printing output to > the screen or is there some step I am missing? Yes. 1. power on the camera 2. ~$ sudo minicom -c on 3a. Hit Enter - it should print "#", or type "dmesg". 3b. If it's not doing anything - w/o terminating minicom powercycle the camera. And it should be printing. If it's not responsive - I would check the cable. Regards, Oleg ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com