Hi Oleg,
I'm having trouble upgrading the NAND memory on an elphel 393. I've tried it
with multiple boards. I used the ipaddress/update_software.html tool. When I
flash the board, I shut it down, remove the uSD card, and reboot it. But it
doesn't boot up correctly. I'm able to log in on
Hi Mohamed,
I think it's not related.
Most likely you need an updated device tree (devicetree.dtb). The newest
boards are revC - they have a different PHY reg address compared to revB
(and older). The recovery cards came with updated devicetree - and so, the
network is working.
The revision
Hi Oleg,
I tried replacing the devicetree.dtb file in the nand folder from
elphel393_20180511 with the one you sent. I tried the
ipaddress/update_software.html tool again but nothing changed. When I log into
the elphel from minicom and try ifconfig I still only get the local address at
Wrong file. My bad. Try this one.
On Tue, Dec 4, 2018 at 3:17 PM Morsy, Mohamed K wrote:
> Hi Oleg,
>
>
> I tried replacing the devicetree.dtb file in the nand folder from
> elphel393_20180511
> with the one you sent. I tried the ipaddress/update_software.html tool
> again but nothing changed.
