Hi Andreas,
But the sensor doesn't give the full field then, does it? If I got it
right it starts at the starting row and column and shows a window with
the specified width and height.
Yes
Yes that's the mode I'm speaking of. Scaling the full field to 1296x960
and then combining the frames
Dear Kaien,
First, can you please provide us with the following info:
go to http://camera-ip/index.php?site=camerasetup/setup.php
then click on Status Report and send it to us.
If FPGA Version is 3534010 then get other version of x353.bit from here:
Dear Salvador,
I hope you got the CF connector board, or getting it really soon.
Happy travelings,
let us know when you come back if you've got the board and were able to put it
in and use.
Thanks,
Olga
___
Support-list mailing list
Dear Ángel,
Did you get an adapter ring from us? You might have removed it with the plastic
front cover.
Like this one: http://www.avsupply.com/details/vm400.shtml
Do you have to unscrew the lens when the ring is installed?
Best regards,
Oleg
___
Leonardo,
Andrey answered your questions already.
Two more things:
1. Do you still need the 10359 board? (your questions make me think you don't
=) )
2. We haven't received the payment for the camera from your company. Could you
please verify that?
Oleg
Dear Peter,
I couldn't find much documentation on this part is how do I trigger
the camera internally?
It should work after you set TRIG=0x4 have TRIG_CONDITION=0x0. The period is
set by TRIG_PERIOD. And you're right - for the camera to generate the output
pulse you need to set
Hi Vineeth,
a. Try ping -w 1 -b 192.168.0.255 - if the camera has some other ip you w
ill probably get it. When I test cameras I usually assign them ips from 192
.168.0.160 to .169.
b. As your camera has usb then it should have a phone socket on the side
(under a small cover) and also you
Dear Osman,
thank you for your interest in Elphel products
I will forward your request to our technical team for their recommendations.
Please excuse a long wait for the reply as we are participating in 3
conferences for the open source products almost simultaneously and our staff is
stretched.
Carlos,
energizer xp18000
Worked for us. Was even enough to power an external HDD.
... is it still possible to be exchanged after that for another lens? or is
a fixed modification of the camera?
Yes, it is possible to change the lens to any other with C/CS/M12 mount.
Assembly of that lens
Hello Carlos and Simon,
we have received the payment and your order is ready for shipment.
I would like to explain some details regarding the lenses you have selected.
We have assembled the camera with the M12 Sunex Super Fisheye lens, with the
specuial adapter, and we had to remove the IR
Hello,
in the field of PIV using Elphel camera of sensor type: MT9P001. Could you
please send me the standard values of the camera that can work in the
best form. The standard values that I mean are the best values shown in
the attached picture (left side of the attached image).
The
Dear Marcos,
we have all the parts for 2 more stereo cameras, so this time the shipping can
be done in just 2 weeks from the time of the order.
Unfortunately, it is not possible to position the sensors vertically in the
stereo application, since the disparity must happen over the horizontal
Hello Elham,
all camera models made with 3D-printed parts are just examples of the possible
configurations. We offer our clients the freedom to modify the camera
configuration based on their needs and application. The camera with 4 sensors
can be arranged in any way you will design it. The
Linden,
> I have a /dev/ttyUSB0
> that registered when the USB to serial is plugged in so good up to that
> point. Have minicom setup as follows:
> Bps/Par/Bits: 115200 8N1
> Hardware Flow Control: No
> Software Flow Control: No
Looks correct.
> Then I assume I just start minicom and it should
14 matches
Mail list logo
