Re: [Elphel-support] 353 Problem Mainboards

Looks like a cabling issue on my end. Waiting on parts before I can proceed. Linden Mills-Connery On Mon, 18 Nov 2019 at 15:33, Linden @ Zone4 wrote: > Think I am having an issue setting up minicom. Have a working camera > running attached to through the serial interface. I have a

Re: [Elphel-support] 353 Problem Mainboards

Linden, > I have a /dev/ttyUSB0 > that registered when the USB to serial is plugged in so good up to that > point. Have minicom setup as follows: > Bps/Par/Bits: 115200 8N1 > Hardware Flow Control: No > Software Flow Control: No Looks correct. > Then I assume I just start minicom and it should

Re: [Elphel-support] 353 Problem Mainboards

Think I am having an issue setting up minicom. Have a working camera running attached to through the serial interface. I have a /dev/ttyUSB0 that registered when the USB to serial is plugged in so good up to that point. Have minicom setup as follows: Bps/Par/Bits: 115200 8N1 Hardware Flow Control:

Re: [Elphel-support] 353 Problem Mainboards

Hi Linden, Follow up. Were you able to get the serial output? Regards, Oleg On Tue, Sep 10, 2019 at 5:29 PM Oleg wrote: > Link to the image of parts 1 & 2 > > > On Tue, Sep 10, 2019 at 5:25 PM Oleg > wrote: > >> Hi Linden, >> >> You

Re: [Elphel-support] 353 Problem Mainboards

Link to the image of parts 1 & 2 On Tue, Sep 10, 2019 at 5:25 PM Oleg wrote: > Hi Linden, > > You need a program like minicom to display a serial port output. > The speed settings for the serial port are 115200 8N1 >

Re: [Elphel-support] 353 Problem Mainboards

Hi Linden, You need a program like minicom to display a serial port output. The speed settings for the serial port are 115200 8N1 . And the device is normally: /dev/ttyUSB0 Do you have the

Re: [Elphel-support] 353 Problem Mainboards

Hi Oleg, I have another camera with issues booting that I would like to diagnose. Discovered I have a 10369 board can you pass along some instructions and I will see if it has a bad block. Thanks, Linden Mills-Connery Zone4 Team 205-820 Main Street Canmore, AB,

Re: [Elphel-support] 353 Problem Mainboards

Thanks Oleg, Got the camera back and it's working. I have done a re-flash a while ago, but I will try that next time. Linden Mills-Connery Zone4 Team 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 On Tue, 28 Aug 2018 at 16:19, Oleg wrote: > Linden, > > I

Re: [Elphel-support] 353 Problem Mainboards

Linden, I reflashed the 000E64081CA1 - and it works now. It had a bad block. See the old bootlog from the serial output (via the extension board 10369) below. Have you ever reflashed a camera? One of the tests that can tell if the flash is probably corrupted is putting the camera in the netboot

Re: [Elphel-support] 353 Problem Mainboards

Thanks for the tip, solved it: I recall the autocampars.php file was causing issues on this camera before and I probably tried to fix it by pasting in the file from source into the web based terminal (http://10.23.33.9/index.php?site=phpshell.php). This converts all the HTML entities ( etc...) to

Re: [Elphel-support] 353 Problem Mainboards

Linden, Does the file look ok? It should have ~4k lines. http://192.168.0.9/index.php?site=admin-bin/editcgi.cgi?file=/usr/html/autocampars.php Regards, Oleg On Fri, Aug 17, 2018 at 6:57 PM Linden @ Zone4 wrote: > I have run '/usr/html/autocampars.php --init', looks like a very similar >

Re: [Elphel-support] 353 Problem Mainboards

> > I deleted /etc/autocampars.xml and went to > http://10.23.33.9/index.php?site=autocampars.php again to re-generate it > which just resulted in an error message. The error message is also in the > GDoc. > That worked with the board I'm testing. What if you reboot? Try from command line?

Re: [Elphel-support] 353 Problem Mainboards

I have run '/usr/html/autocampars.php --init', looks like a very similar error trace to loading http://10.23.33.9/index.php?site=autocampars.php. Output posted at bottom of GDoc: https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJLodron0P0zYcpB4/edit?usp=sharing Linden Mills-Connery

Re: [Elphel-support] 353 Problem Mainboards

Had a cabling issue from when I dissembled it earlier. Sensor is now detected. I have updated the GDoc with the new outputs: https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJLodron0P0zYcpB4/edit?usp=sharing Firmware s 8.2.15. I deleted /etc/autocampars.xml and went to

Re: [Elphel-support] 353 Problem Mainboards

So, it does not detect the sensor. What's the firmware? > # cat /etc/issue You might have tried another cable. If it's the board - I would check the connector first. Then the power, then i2c bus. Links to schematics are under the diagrams here . Regards,

Re: [Elphel-support] 353 Problem Mainboards

Thanks Oleg. 000E64081C8B Here is the requested diagnostics: https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJLodron0P0zYcpB4/edit?usp=sharing 000E64081CA1 I will send that one back to you. Will wait until we know if 000E64081C8B needs to go back as well or if I can resolve the

Re: [Elphel-support] 353 Problem Mainboards

Hello Linden, 000E64081C8B > Boots up fine and I can access it on the network fine. The problem is with > the interface to the image sensor. All that is available on bimg is a 1px x > 1px white image. I have tried connecting this mainboard to a working sensor > and there was no change in