May Garmin GPS ba yung Palwan rider? I can prepare a garmin map for
him to verify. (That's a lot fuel, btw.)
On Sun, Jun 14, 2009 at 5:50 PM, Marloue Pidormur...@mail2engineer.com wrote:
@maning:
What is you suggestion?
@George:
I already downloaded the shape file for Palawan roads. Can you
Hi,
FYI, I edited the road from Puerto to Elnido based on GPS traces I made last
april. That might save some gasoline ;-D
http://www.openstreetmap.org/user/Totor/traces/355844
http://www.openstreetmap.org/user/Totor/traces/355842
Regards,
Totor
--- On Tue, 6/16/09, maning sambale
We can use those GPS referenced roads as a basis for the accuracy of the
data.
murlwe
-Original Message-
From: Totor Osm [totor_...@yahoo.com]
Sent: 6/17/2009 3:04:13 AM
To: talk-ph@openstreetmap.org
Subject: Re: [talk-ph] importing Palawan roads
Hi,
FYI, I edited the road from Puerto
Hi,
As JOSM uses layers again, it is possible to copy an island from the complete
coastline layer, and paste it into a separate layer.
You can then delete the complete coastline layer, and just work on the single
island.
This should be much faster, and I thought this might be useful to those
Well, as there doesn't seem to be much interest in the bulk upload, I thought
it would be easier for those people interested in updating the coastline, to
just pick and choose which islands to upload from the file I uploaded.
I think with a bit of co-ordination it would be possible for people
amenity=tire?
--
cheers,
maning
--
Freedom is still the most radical idea of all -N.Branden
wiki: http://esambale.wikispaces.com/
blog: http://epsg4253.wordpress.com/
--
why not just use
amenity=vulcanizing?
btw, what should be the attributes/tag for government offices?
can we just set a generic tag (that will show up on the map) for POIs
marked that will be updated/identified later?
On Wed, Jun 17, 2009 at 10:09 AM, maning
sambaleemmanuel.samb...@gmail.com
shop=vulcanizing
or
shop=tire
- Original Message
From: George Tujan gtu...@gmail.com
To: maning sambale emmanuel.samb...@gmail.com
Cc: osm-ph talk-ph@openstreetmap.org
Sent: Wednesday, June 17, 2009 10:14:18 AM
Subject: Re: [talk-ph] tag for vulcanizing shops
why not just use
As OSM originated in the UK, they would write tyre rather than tire
so it's hard to say which one to use. I think, to avoid confusion and
because it's more accurate shop=vulcanizing is a good tag for a
vulcanizing shop :)
Ronny.
Nacario Neil wrote:
shop=vulcanizing
or
shop=tire
-
Ayt! Thank you.
On Wed, Jun 17, 2009 at 1:19 PM, Ronny Ager-Wick - Develo
Ltd.r...@develo.ltd.uk wrote:
As OSM originated in the UK, they would write tyre rather than tire so
it's hard to say which one to use. I think, to avoid confusion and because
it's more accurate shop=vulcanizing is a
From: maning sambale emmanuel.samb...@gmail.com
Date: Tuesday, 16 June, 2009, 5:02 AM
Nice work ianhaylock!
I downloaded the file and my PC crawled!
I suspect you know this one already Maning, but I'm posting it to the forum so
everyone can benefit ...
When you start
On Tue, Jun 2, 2009 at 6:21 PM, Ulf Mölleruse...@ulfm.de wrote:
Stefan Baebler schrieb:
the all data created by use of any tools which connect to
openstreetmap.org part can be problematic, as my browser connects to
openstreetmap.org. Heck, my computer and router also connect there,
and so
CBD is what the geographers call it. I think it can cover the mixed-use bit
around the central core as well, though there is a term Outer Business
District for the mixed-use bit (mixed residential and workshops) when that
needs to be distinguished. Alas we've often bull-dozed those areas in the
David Paleino skrev:
On Mon, 15 Jun 2009 19:17:10 +0200, Esben Damgaard wrote:
David Paleino skrev:
But how do I find the one who uploaded the tracks?
Err...
http://www.openstreetmap.org/traces
Sample entry (the first one right now):
20090615_W_E4schhausen.GPX [..]
Wäschhausen
On Tue, Jun 16, 2009 at 12:00 AM, Ed Loache...@loach.me.uk wrote:
Ahh, yes I can :)
But how do I find the one who uploaded the tracks? And what if
they
don't reply or aren't active any more?
You could perhaps use Potlatch as an editor which only shows (I
think) a certain number of most
On Mon, Jun 15, 2009 at 6:22 PM, Frederik Rammfrede...@remote.org wrote:
http://www.remote.org/frederik/tmp/three.jpg
I don't find that too bad actually. But it has no map on the first page.
I vehemently stated that we're about data, not about slippy maps, in the
talk-de discussion; however
Ah yeah, those were the days when we didn't have a reliably working
map on the front page, so we were looking for alternatives (you can
just make out the map image is the old linework-on-landsat version.
But that's not an issue any more.
Well, but it is an issue that the map we show off now,
- Original Message -
From: osmtransla...@polygongis.com
To: talk@openstreetmap.org
Sent: Monday, June 15, 2009 10:08 PM
Subject: [OSM-talk] How are coastlines created?
Hi,
I downloaded the geometry for the island of Aruba
X1--69.8126220675252
X2--70.1181793184896
2009/6/16 Peter Dörrie peter.doer...@googlemail.com:
Well, but it is an issue that the map we show off now, is not exactly
feature rich (plain text: is nothing to show off). So I think the discussion
is warranted to either add more bliing bling to the map, or give it a less
dominant status.
On Mon, Jun 15, 2009 at 7:22 PM, Frederik Rammfrede...@remote.org wrote:
http://www.remote.org/frederik/tmp/three.jpg
I don't find that too bad actually. But it has no map on the first page.
I vehemently stated that we're about data, not about slippy maps, in the
talk-de discussion; however
I agree with Martin. It would be nice to keep the map prominent on the
home page... but add more interactivity. Permalinks with markers would
be a big advantage as it would make the map more functional without
adding too much overhead. When I want to point something out to
someone, I send the URL
I disagree because I think, the map is the best way to show our
potential
Well, clearly not. The potential of OSM is not that we can produce a nice
slippy map. Google did that just fine. The potential is that you can do a
lot more with the osm data, than you can with any copyrighted map-API
On Tue, Jun 16, 2009 at 1:56 PM, brendan barrettshogun...@gmail.com wrote:
Perhaps a compromise would be to have some links to other versions of
the map
If the layer selector was exposed by default, that would have a big impact.
Cheers,
Andy
___
2009/6/16 Richard Mann richard.mann.westoxf...@googlemail.com:
City Centre or Town Centre would generally refer to the commercial
centre (or CBD).
I have no doubt that commercial activities concentrate in these zones,
but I would see it quite sadly to have the centres reduced to this
commercial
On Tue, Jun 16, 2009 at 3:04 PM, Andy Allangravityst...@gmail.com wrote:
Perhaps a compromise would be to have some links to other versions of
the map
If the layer selector was exposed by default, that would have a big impact.
better IMHO would be to have thumbnails of same area, different
hi,
just a minor stats:
it took us 4 years: from april 2005 to go from changeset 1 to
1.000.000 in april 2009.
We are now, after only 2 months, already at changeset 1.500.000
who...
-S
___
talk mailing list
talk@openstreetmap.org
On Tue, 16 Jun 2009 15:40:35 +0200, Simone Cortesi sim...@cortesi.com
better IMHO would be to have thumbnails of same area, different
design/features.
I like this approach as part of the three column layout, and I would use
four thumbnails for people to get at the map:
- default
- osmarender
Dan and Kris
The repository I can think off is mentioned in the original email below.
Other individuals that immediately spring to mind are:
Alfred Wainwright: http://www.wainwright.org.uk/
I can provide more details, as I have done quite a bit of research on his
mapping. For instance he
- public transport (http://www.öpnvkarte.de)
Oh. I like that. I didn't realise it covered countries outside Germany as well.
And I didn’t know that there were bus route relations anywhere near here.
There's an added incentive to get around to adding the two bus routes I traced
the weekend
I also like the 3 column layout as it is a lot more inviting to potential
new recruits than the current page.
Map thumbnails also seem like a good idea although I would drop osmarender
as a thumbnail and replace it with a topographic hiking map or maybe a
rotating spot for the likes of
Hi Everyone,
I recently donated openmaps.org to the Open Street Map Foundation.
Everyone here is doing a great job with this project and I thought you
could make better use of the domain. Having said that, the foundation
owns the domain now and has full control on what to do with it and I
trust
On Tue, 16 Jun 2009 16:24:19 +0200
Simone Cortesi sim...@cortesi.com wrote:
hi,
just a minor stats:
it took us 4 years: from april 2005 to go from changeset 1 to
1.000.000 in april 2009.
We are now, after only 2 months, already at changeset 1.500.000
who...
-S
Just
On 16 Jun 2009, at 05:55, Simone Cortesi wrote:
On Mon, Jun 15, 2009 at 7:22 PM, Frederik Rammfrede...@remote.org
wrote:
http://www.remote.org/frederik/tmp/three.jpg
I don't find that too bad actually. But it has no map on the first
page.
I vehemently stated that we're about data,
Eric Pritchett wrote:
I'm sure there are more advantages,
There is; there is no trade mark on the name :)
Stefan
___
talk mailing list
talk@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk
Isn't that skewed by what the import process to 0.6 defined as a
changeset?
On 16 Jun 2009, at 07:24, Simone Cortesi wrote:
hi,
just a minor stats:
it took us 4 years: from april 2005 to go from changeset 1 to
1.000.000 in april 2009.
We are now, after only 2 months, already at
We're about data - the map IS the data. I defy anyone to illustrate more
data in any other way.
Maybe the map should try to show more of the data (render the lines narrow
so more shows up, maybe with names appearing at only higher zooms) rather
than the default being an all-purpose street map.
On Tue, Jun 16, 2009 at 5:52 PM, SteveCst...@asklater.com wrote:
Isn't that skewed by what the import process to 0.6 defined as a
changeset?
yes. e.g: JOSM uses a changeset for each upload, but the changeset
synthesis procedure created one for each continuous session without
gaps of more than
On Jun 16, 2009, at 12:30 PM, Eric Pritchett wrote:
* There is often a misconception that OSM is a street focused
project. I think this would be the most important. It's
amazing what a name can do.
Sometimes you pick a name that has drawbacks. But everybody knows
what
On Jun 16, 2009, at 7:35 AM, Tom Chance wrote:
On Tue, 16 Jun 2009 15:40:35 +0200, Simone Cortesi
sim...@cortesi.com
better IMHO would be to have thumbnails of same area, different
design/features.
I like this approach as part of the three column layout, and I would
use
four
Hi,
Jonas' idea is very good!!!
after looking for information on mtbiking trails, I found osm. But after a
short look, i thought it would be of no use, being focused on streets and
didn't look at it any more (for some month), until someone told me were to
look in osm. And now: it's just what
One of the main annoyances that people tell me that they have with OSM
is that whenever they visit the site, the map shows them just the UK.
What are people's thoughts about the default zoom?
I'm aware that sometimes it may use a cookie and so the map will open
up to a previously viewed area -
What I was thinking about for some time for experimenting on
www.openstreetmap.pl was that the subset of data would be loaded
together with the bitmap tiles in a txt or json file and objects such
as big roads or buildings highlight when you mouse over them, perhaps
after a short delay.
Hi,
Kevin Peat wrote:
I don't think we should drop maps completely from the front page but I think
we should show more of what is special about the project.
That's what I was thinking. Whether the map is the data or not -
Google has a map, and it is (currently) more complete and faster than
Maybe we could also leverage the new part of HTML 5 that enables
geolocation to center the map on the user's current location. I know
IE doesn't support it yet, but waiting for IE support of a new
technology is pretty much like saying that you will lag years behind...
Yann
Le 16 juin 09 à
2009/6/16 Tim Waters (chippy) chippy2...@gmail.com:
(One main difference on other sites is that their search box is much
more prominent)
I don't even see more than 5 pixels at it at my resolution.
To suggest something less radical than a complete redesign of osm.org:
Could it please be moved
On 16 Jun 2009, at 11:38, Tim Waters (chippy) wrote:
One of the main annoyances that people tell me that they have with OSM
is that whenever they visit the site, the map shows them just the UK.
I thought that the IP 2 geo stuff was in there to make it default to
the country it thinks you're
On 16 Jun 2009, at 19:38, Tim Waters (chippy) wrote:
One of the main annoyances that people tell me that they have with OSM
is that whenever they visit the site, the map shows them just the UK.
Only if they have a UK IP. Getting more specific than country level is
usually unreliable.
SteveC wrote:
On 16 Jun 2009, at 09:51, Stefan de Konink wrote:
Eric Pritchett wrote:
I'm sure there are more advantages,
There is; there is no trade mark on the name :)
There isn't on openstreetmap either.
Ok, the first time they refused it:
On Tue, Jun 16, 2009 at 10:52 PM, Shaun
McDonaldsh...@shaunmcdonald.me.uk wrote:
Would zooming based on IP Address be a good idea?
Already done to the country level.
I'm in South Africa... and it defaults to the UK for me. Obviously if
I return to the site, then the cookie kicks in and the map
On 16 Jun 2009, at 14:15, Stefan de Konink wrote:
SteveC wrote:
On 16 Jun 2009, at 09:51, Stefan de Konink wrote:
Eric Pritchett wrote:
I'm sure there are more advantages,
There is; there is no trade mark on the name :)
There isn't on openstreetmap either.
Ok, the first time they refused
Hi,
Stefan de Konink wrote:
Ok, the first time they refused it:
http://www.ipo.gov.uk/domestic?domesticnum=2500154
But since you tried again in two categories...
http://www.ipo.gov.uk/ohim?ohimnum=E7366859
To the best of my knowledge, community trademarks are somewhat
transactional - if
SteveC wrote:
Wrong again. The ™ was applied for the logo and the name
So 'mark' means to me 'name' so OpenStreetMap was protected if it was
granted, yes?
in the UK and
Europe and the Foundation owns the whole problem, not me.
I thought you did 'something' in the foundation too ;)
On 16 Jun 2009, at 14:27, Stefan de Konink wrote:
SteveC wrote:
Wrong again. The ™ was applied for the logo and the name
So 'mark' means to me 'name' so OpenStreetMap was protected if it
was granted, yes?
If, yes.
in the UK and Europe and the Foundation owns the whole problem, not
On Jun 16, 2009, at 5:09 PM, SteveC wrote:
On 16 Jun 2009, at 09:51, Stefan de Konink wrote:
Eric Pritchett wrote:
I'm sure there are more advantages,
There is; there is no trade mark on the name :)
There isn't on openstreetmap either.
My understanding is that in the US a trademark on
SteveC wrote:
Next I'm going to wake up in the morning and you'll be outside my house,
stalking me :-O
Not to worry, Saturday we started a project to have the Chamber of
Commerce in The Netherlands to be open 24x7 (like your patent office
they close at night).
I have already 1544818 persons
2009/6/16 k...@vielevisels k...@vielevisels.de
So, if you don't take some time to discover what osm can do, you probably
won't find it. There openmaps.org could help. One thumbnail, a two
sentence
explanation and a link, perfect.
Some mockup design of how this could look like:
2009/6/15 Peter Dörrie peter.doer...@googlemail.com:
Move the map
Please don't move the map. It sums-up a lot (not everything but a
lot) of what we do.
OPEN - edit button
STREET - the data
MAP - its geo
--
cheers,
maning
--
Freedom is still
Hi all,
(Sorry if im making too much traffic)
Anyway, because of the IMMENSE volume of data that i'll be loaded, i feel
its important to keep everyone uptodate, so that you all (everyone) has a
chance to speak now, and yell at me about errors. :-)
However, as i learned from tiger data, im sure
2009/6/17 Tim Waters (chippy) chippy2...@gmail.com
One of the main annoyances that people tell me that they have with OSM
is that whenever they visit the site, the map shows them just the UK.
Presumably these are people who are in the UK?
What are people's thoughts about the default zoom?
Le mardi 16 juin 2009 à 22:45, SteveC a écrit :
One of the main annoyances that people tell me that they have with OSM
is that whenever they visit the site, the map shows them just the UK.
I thought that the IP 2 geo stuff was in there to make it default to
the country it thinks you're
In het grote OpenKvK project dacht ik ook wat mash ups met data te gaan
maken. Waaronder de ANBI lijst, dit is een lijst van de belastingdienst
waar Algemeen Nut Beoogende Instellingen op staan.
Wat dit effectief betekent:
- Giften, Sponsoring zijn belasting aftrekbaar
- Nalatenschappen
On Tue, 16 Jun 2009, Delta Foxtrot wrote:
what did you say about geocachers??
Been some accidents while people were concentrating more on their GPS than
on the road, trying to find the link with photos but nothing is coming up
in google.
I knew what you meant
even osm wiki has examples of
--- On Tue, 16/6/09, Elizabeth Dodd ed...@billiau.net wrote:
I knew what you meant
even osm wiki has examples of mappers coming to grief
You meant this?
http://wiki.openstreetmap.org/wiki/Mapping_accidents
:)
___
Talk-au mailing list
Hi Folks,
I’m a newcomer to the OSM project with a couple of questions.
BACKGROUND:
I recently traced and added the streets of my village and surrounding
areas to OSM (Bowen Mountain NSW).
http://www.openstreetmap.org/?lat=-33.582lon=150.6326zoom=14layers=B000FTF
Amigos,
O arquivo de tradução estava praticamento pronto, mas, checando no
repositório SVN, percebi que a estrutura do arquivo foi bastante alterada.
Vejam os links:
http://wiki.openstreetmap.org/wiki/Pt-br.yml
http://svn.openstreetmap.org/sites/rails_port/config/locales/
Alguma idéia para
Vamos pedir acesso ao SVN do próprio OSM? Acho mais simples.
[]
2009/6/16 Samuel Vale srcv...@minaslivre.org
Em Ter, 2009-06-16 às 14:08 -0300, Vitor George escreveu:
Amigos,
O arquivo de tradução estava praticamento pronto, mas, checando no
repositório SVN, percebi que a estrutura do
Ich habe diese bisher immer als unclassified betrachtet und auch
gemappt, wenn ihre Bedeutung für tertiary nicht ausreicht.
Für mich ist die Interpretation der Straßenklasse unclassified ähnlich
deiner. Sie liegt genau zwischen Tertiary und Residential, wobei
Residential keinen
Am 16. Juni 2009 08:05 schrieb André Riedel riedel.an...@gmail.com:
Ich habe diese bisher immer als unclassified betrachtet und auch
gemappt, wenn ihre Bedeutung für tertiary nicht ausreicht.
Für mich ist die Interpretation der Straßenklasse unclassified ähnlich
deiner. Sie liegt genau
Original-Nachricht
Datum: Tue, 16 Jun 2009 03:01:22 +0200
Von: Martin Koppenhoefer dieterdre...@gmail.com
An: Openstreetmap allgemeines in Deutsch talk-de@openstreetmap.org
Betreff: Re: [Talk-de] Admin boundarys Was: Subjektive OSM Statistik
das ist zwar eine mögliche
Liebe Geografen,
diese Diskussion ist noch ergebnislos:
http://www.openstreetmap.org/?lat=50.92lon=10.83zoom=7
Städte wie Hamburg, München, Köln, Frankfurt, Nürnberg, erscheinen nicht.
Wie kann man das ändern?
Das betrifft Mapnik genauso wie Osmarender.
Fehler in verschiedenen Zoomstufen.
Chris-Hein Lunkhusen schrieb:
Hier schreibt er selber dazu:
http://forum.openstreetmap.org/viewtopic.php?id=3674
Grüße,
Chris-Hein
Inzwischen hat er sich abgemeldet. Wenn man sich seine Postings so
durchliest, ist das wohl das Beste, was uns passieren kann!
VG
Jörk
Hi malenki,
das liegt am Renderprozess von t...@h. Ich denke Du hast alles richtig gemappt.
Um das Problem zu beheben stosse auf
http://www.informationfreeway.org/?lat=72.44lon=103.6zoom=12
erneut ein Rendering der betroffenen tiles an.
Gruess, Micha
Am 15. Juni 2009 21:39 schrieb malenki
Ich fände es schön, wenn wieder deutlicher wird, dass unclassified auch
innerhalb von Ortschaften eingesetzt werden darf und es zudem die typische
Straße in Gewerbe- und Industriegebieten ist.
Ich finde, dass eine Straße im Industriegebiet durchaus auch ein
residential sein kann. Wenn man
Hallo,
dank der letzten Europawahlen gibt es fuer Magdeburg ein ziemlich komplettes,
fuer OSM verwendbares Strassenverzeichnis und dank Florian gibt es dazu auch
eine Auswertung auf
http://osm.gt.owl.de/Strassenliste/Magdeburg/Status.html
Will mir noch jemand von den Magdeburg Mappern hier
Hallo zusammen,
Selber arbeite ich gerade daran die editing faehigkeiten von GpsMid zu
verbessern. GpsMid sollte auf den meisten j2me faehigen Handies und somit
einem Grossteil der derzeit verfuegbaren laufen, also auch dem Nokia E71.
wow, super, hört sich gut an. J2ME ist gerade der richtige
Micha Ruh schrieb:
das liegt am Renderprozess von t...@h. Ich denke Du hast alles richtig
gemappt. Um das Problem zu beheben stosse auf
http://www.informationfreeway.org/?lat=72.44lon=103.6zoom=12
erneut ein Rendering der betroffenen tiles an.
Weder Mapnik noch t...@h (auch nach erneutem
Hallo Jan,
habe leider erst heute gesehen, dass du am 8. Juni 2009 die Daten von der
Freien
Tonne in OpenStreetMap importiert hast. Eigentlich wolltest du dich noch mal
melden.
Wenn du Daten in die Datenbank schreibst, könntest du dann bitte prüfen ob die
Seezeichen schon vorhanden sind. Die
Am Dienstag, den 16.06.2009, 12:45 +0200 schrieb malenki:
Micha Ruh schrieb:
das liegt am Renderprozess von t...@h. Ich denke Du hast alles richtig
gemappt. Um das Problem zu beheben stosse auf
http://www.informationfreeway.org/?lat=72.44lon=103.6zoom=12
erneut ein Rendering der
Florian Lohoff schrieb:
Und die Straßenliste muss man entsprechend aus Amtlichen Quellen
erarbeiten die Gemeinfrei sind - D.h. aus Gesetzen/Satzungen oder
Zwangsveroeffentlichungen.
Achtung: Nicht alle amtlichen Veröffentlichungen sind gemeinfrei
und selbst wenn sie gemeinfrei sind, liegt
Martin Koppenhoefer schrieb:
PS: Der Rest der Ergebnisse war ziemlich unbrauchbar und wie gesagt
wurde das echte Tübingen nicht gefunden, hier die anderen Ergebnisse:
[...]
Wie gesagt: Das ist ein sehr frühe Version, die sich *nur* mit den
Variationen der Namensschreibungen beschäftigt!
Die
Am 16. Juni 2009 09:52 schrieb André Riedel riedel.an...@gmail.com:
Ich fände es schön, wenn wieder deutlicher wird, dass unclassified auch
innerhalb von Ortschaften eingesetzt werden darf und es zudem die typische
Straße in Gewerbe- und Industriegebieten ist.
Ich finde, dass eine Straße im
Am 16. Juni 2009 03:53 schrieb Heiko Jacobs heiko.jac...@gmx.de:
... aber es wird genau dort auch unter dem Titel
Gesamtheit aller Erschließungsanlagen/Erschließungssystem
zwischen Erschließungsstraße und Sammelstraße unterschieden,
damit stünde residential für Erschließungsstraße (in
Martin Koppenhoefer schrieb:
Hoffe, Du lässt das nicht in einer Noob-fähigen Form auf die Welt
los, und nutzst es selbst nicht blind für irgendwelche Ways
sondern nur für die, die Du kennst und überprüfst.
Erstmal hast Du mir nicht vorzuschreiben, wie ich mappe. Zweitens
werde ich mich an
Grundsätzlich gilt: je besser die Welt erfasst ist, /und/ je
öffentlicher und frei die Daten zur Verfügung stehen, desto besser.
Das erhöht die Transparenz und ermöglicht dadurch Erkennung und
Diskutierbarkeit von gut und böse.
Gewisse Dinge muss ich nicht erst eintragen um zu wissen das es
Am 16. Juni 2009 14:22 schrieb Tobias Wendorff
tobias.wendo...@uni-dortmund.de:
Martin Koppenhoefer schrieb:
Hoffe, Du lässt das nicht in einer Noob-fähigen Form auf die Welt
los, und nutzst es selbst nicht blind für irgendwelche Ways
sondern nur für die, die Du kennst und überprüfst.
Am 16. Juni 2009 13:53 schrieb Tobias Wendorff
tobias.wendo...@uni-dortmund.de:
Wie gesagt: Das ist ein sehr frühe Version, die sich *nur* mit den
Variationen der Namensschreibungen beschäftigt!
ja, war ja nur eine Anmerkung in der Hoffnung, dass es Dir beim
Verbessern hilft. Wenn die Endung
Sven Geggus schrieb:
http://www.openstreetmap.org/?lat=49.17171lon=8.37405zoom=17layers=0B00FTF
Ah, schön, jetzt habe ich mal ein real exisiterendes Bsp. dafür...
Gruß Mueck
___
Talk-de mailing list
Talk-de@openstreetmap.org
Moin, moin,
zu diesem Thema gibt es natürlich schon einige Ansätze in OSM wie z.B.
die Segler-Seite oder OpenSeaMap. Die Segler1-Wikiseite richtet sich
offenbar an Fahrtensegler oder Motoryachtfahrer, die über kommerzielle
Seekarten verfügen und über OSM zusätzliche Informationen im
Andre Hinrichs schrieb:
Warum Mapnik da Probleme hat, kann ich nicht sagen.
Ich hoffe, dass das jemand anderes weiß.
Für t...@h ist das ein grundsätzliches Problem. Wenn ein Tile gerendert
wird, wird nur ein etwas größerer Bereich geladen. Wenn dann in den
Daten nur die Insel enthalten ist,
Martin Koppenhoefer schrieb:
Hoffe, Du lässt das nicht in einer Noob-fähigen Form auf die Welt
los, und nutzst es selbst nicht blind für irgendwelche Ways
sondern nur für die, die Du kennst und überprüfst.
Erstmal hast Du mir nicht vorzuschreiben, wie ich mappe. Zweitens
werde ich mich
On Mon, Jun 15, 2009 at 10:20:02PM +0200, Johannes Huesing wrote:
Florian Lohoff f...@rfc822.org [Mon, Jun 15, 2009 at 02:52:06PM CEST]:
Es hat sich wieder einiges getan - Ich habe eine visualisierung
gebaut die die vollstaendigkeit der entsprechenden Gebiete
Zeigt (Im moment nur NRW).
Mirko Küster schrieb:
Solange du das mit deinen Daten machst ok. Wenn du aber in der Arbeit
anderer mit irgendwelchen automatischen Anwendungen loslegst, ist dir die
Kritik so gut wie sicher.
Noch viel sicherer ist jedoch, dass ich das Script nicht offline nehmen
werde.
Mir hat schon das
Martin Koppenhoefer schrieb:
das war nicht meine persönliche Meinung sondern die Wiedergabe des
allgemeinen Konsenses zum Einsatz von automatischen Tools und Bots. Es
ist halt ein Unterschied, ob ich automatisch Änderungen mache, oder ob
ich die von Hand vornehme.
Wo erstellt das Tool
Sollte es also durch welche Tools auch immer zu Verschlimmbesserungen
kommen, werde ich das generell immer wieder zurückdrehen und einen
Liebesbrief schreiben. Bots sind nützlich bei offensichtlichen Fehlern
wie z.B. falschen Schlüssen. Zur Korrektur von form- und lagegenauigkeit
braucht
Am 16. Juni 2009 16:24 schrieb Tobias Wendorff
tobias.wendo...@uni-dortmund.de:
Martin Koppenhoefer schrieb:
das war nicht meine persönliche Meinung sondern die Wiedergabe des
allgemeinen Konsenses zum Einsatz von automatischen Tools und Bots. Es
ist halt ein Unterschied, ob ich automatisch
Mirko Küster schrieb:
Nein 8 Jahre Datensammelarbeit und einige Monate um diese Daten OSM tauglich
zu machen, damit ich diese dem Projekt überlassen kann.
Ich habe auch schon eine Menge Arbeit in OSM gesteckt ... die
ganzen Treffen und Verhandlungen mit den Kommunen, die Datenaufarbeitung
für
Florian Lohoff schrieb:
Das bedeutet nix - Teilweise sind das OCR fehler wenn ich das OCRed
habe aus
irgendwelchen Bildern in den PDFs, teilweise sieht man das die listen
von den Gemeinden Manuell durch abschreiben erzeugt worden sind.
Nicht nur Du hast den Weg mit den Verzeichnissen
Hi Jacques,
Irgend ein Kommentar von 'www.freietonne.de'?
Das fällt doch in eure 'Zuständigkeit' ;-)
Schöne Grüße
Jacques
Unsere Zuständigkeit st gut. Wir sind da gerade am frei erfinden, und die
Phantasie hat da schnell Grenzen.
'man_made=flood_barrier'
gefällt mir aber. Nur würde
Hallo Olaf,
Hallo Jan,
habe leider erst heute gesehen, dass du am 8. Juni 2009 die
Daten von der Freien Tonne in OpenStreetMap importiert hast.
Eigentlich wolltest du dich noch mal melden.
Wenn du Daten in die Datenbank schreibst, könntest du dann
bitte prüfen ob die Seezeichen schon
On Tue, Jun 16, 2009 at 04:58:26PM +0200, Tobias Wendorff wrote:
Das Straßenschild ist auf keinen Fall eine vertrauenswuerdige Quelle.
Ich kann Dir im Ruhrgebiet eine Menge Strassen zeigen - und damit
meine ich keine NahverkehrSTRASSEN.
Die wurden fast alle Mitte bis Ende der 90er gemacht,
1 - 100 of 211 matches
Mail list logo
