Davor Spasoski
Sent: Wednesday, July 26, 2017 10:35 PM
To: Gorki Alfaro <gork...@gmail.com>
Cc: users@kannel.org
Subject: Re: Routing to multiple SMSCs OPENSMPP
The smscs do not necessarily have to have same-ids. Same smsc-ids are used when you want to load balance the traffic among tw
efix2. If
> you on top of this want to have a preferred SMSC for prefix3 instead of
> load sharing, just add preferred-smsc-id = SMSC1 in the SMSC1 configuration.
>
>
>
> Good luck!
>
>
>
> *Davor Spasoski*
>
>
>
> *From:* users [mailto:users-boun...@kannel.or
f load sharing, just
add preferred-smsc-id = SMSC1 in the SMSC1 configuration.
Good luck!
Davor Spasoski
From: users [mailto:users-boun...@kannel.org] On Behalf Of Davor Spasoski
Sent: Wednesday, July 26, 2017 10:35 PM
To: Gorki Alfaro <gork...@gmail.com>
Cc: users@kannel.org
Subject: Re: Ro
The smscs do not necessarily have to have same-ids. Same smsc-ids are used when you want to load balance the traffic among two or more smscs.
Use two id. It is important that smsc1 should allow smsc2 and vice versa. I can't be much verbose now, as I'm writing from my handy. I'll have access to
Hi Davor, thanks for your help.
I understand that in the opensmppbox config I have to set the variable
*route-to-smsc* to a specific smsc-id and then in the kannel configuration
file set two o more group = smsc with the same id (here use the
variables allowed-smsc-id
and allowed-prefix) ?
Can
Hi,
Try using the allowed-smsc-id and allowed-prefix of the SMSC group set of
variables.
Davor Spasoski
From: users [mailto:users-boun...@kannel.org] On Behalf Of Gorki Alfaro
Sent: Wednesday, July 26, 2017 5:47 AM
To: users@kannel.org
Subject: Routing to multiple SMSCs OPENSMPP
Hello my