[vchkpw] qmail-1.03 | vpopmail-5.2.1 | qmail-smtp-auth-.03
Hello guys its been a while. I have been trying over the past couple of weeks to get smtp-auth working with no success. I have patched qmail and re-ran make setup check to make the new binaries. This seems to have worked because my qmail-smtp file is now 32bites larger :) I have also installed the recommended cmd5checkpw. I'm still unable to get this to work, and I'm asking for help as I'm at a lose and really need to get this working. The following is my run script for qmail-smtpd... #!/bin/sh QMAILDUID=`id -u qmaild` NOFILESGID=`id -g qmaild` VPOPMAILID=`id -u vpopmail` VPOPMAILGID=`id -g vchkpw` MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` LOCAL=`head -1 /var/qmail/control/me` if [ -z $QMAILDUID -o -z $NOFILESGID -o -z $MAXSMTPD -o -z $LOCAL ]; then echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in echo /var/qmail/supervise/qmail-smtpd/run exit 1 fi exec /usr/local/bin/softlimit -m 400 /usr/local/bin/tcpserver -H -l0 -R -c 512 -x /etc/tcp.smtp.cdb -u $VPOPMAILID -g $VPOPMAILGID 0 smtp /var/qmail/bin/qmail-smtpd $LOCAL /u2/vpopmail/bin/vchkpw /bin/true I am able to send and receive normally if I have my ip address in the tcp.smtp file but if I take it out I can't send. As far as I can tell it does not know how or where to authenticate. Joe PS please let me know if you need anything else from me.
[vchkpw] Problems getting unsubscribe
Hey anyone know whats going on with inter7? I have tried several times now to unsubscribe from the list with no success. I even sent an email to them and it bounced. Joe
RE: [vchkpw] Re: mail not being delivered to the right place?
Peter Palmreuther wrote: Have a look if '~vpopmail/domains/mmz.org' is a symlink to '~vpopmail/domains'treels.com' or if /var/qmail/control/virtualdomains trells.com:trells.com mmz.org:mmz.org /var/qmail/users/assign +trells.com-:trells.com:89:89:/u2/vpopmail/domains/trells.com:-:: +trells.com-:trells.com:89:89:/u2/vpopmail/domains/trells.com:-:: points 'mmz.org' to 'trells.com' or it's directory. yes its a directory with drwx-- for each directory I have checked that and it is not a symlink nor is it an alias to trells.com. Also checking vuserinfo for [EMAIL PROTECTED] shows [root@tc1 bin]# ./vuserinfo [EMAIL PROTECTED] name: trell all services available dir: /u2/vpopmail/domains/mmz.org/1/trell and [EMAIL PROTECTED] shows [root@tc1 bin]# ./vuserinfo [EMAIL PROTECTED] name: trell all services available dir: /u2/vpopmail/domains/trells.com/trell so according to that it should be going to seperate domains but its not. Any other suggestions? Joe
RE: [vchkpw] Re: mail not being delivered to the right place?
/var/qmail/users/assign +trells.com-:trells.com:89:89:/u2/vpopmail/domains/trells.com:-:: +trells.com-:trells.com:89:89:/u2/vpopmail/domains/trells.com:-:: *ooppss* No mmz.org? :-))) yep oppss the copy paste did not work :( actual file is as follows [root@tc1 bin]# cat /var/qmail/users/assign +trells.com-:trells.com:89:89:/u2/vpopmail/domains/trells.com:-:: +bazalar.com-:bazalar.com:89:89:/u2/vpopmail/domains/bazalar.com:-:: +oaksfamily.com-:oaksfamily.com:89:89:/u2/vpopmail/domains/oaksfamily.com:-: : +iq-tech.net-:iq-tech.net:89:89:/u2/vpopmail/domains/iq-tech.net:-:: +mmz.org-:mmz.org:89:89:/u2/vpopmail/domains/mmz.org:-:: Sorry for the mistake on my part. Joe
[vchkpw] mail not being delivered to the right place?
Hey gurus I am running Redhat 7.3, with qmail 1.03, vpopmail 5.2.1, qmailadmin 1.0.5, qmail-smtpd-auth-0.31 I have several domains that are running as virtual, trells.com bazalar.com iq-tech.net mmz.org oaksfamily.com Now at trells.com and mmz.org I have an account called trell. When someone sends to [EMAIL PROTECTED] the mail gets delivered to the trells.com domain new directory instead of mmz.org's new folder. Below is 2 headers, one from my [EMAIL PROTECTED] account and one from my netscape account, notice that the deliver path shows as [EMAIL PROTECTED], How can I fix this, and why is it doing that? Joe Return-Path: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] Received: (qmail 17972 invoked by uid 89); 13 Dec 2002 07:30:59 - Delivered-To: [EMAIL PROTECTED] Received: (qmail 17968 invoked by uid 89); 13 Dec 2002 07:30:59 - Received: from unknown (HELO joaksdell) (156.153.255.242) by 207.168.116.66 with SMTP; 13 Dec 2002 07:30:59 - From: Joe Oaks [EMAIL PROTECTED] To: [EMAIL PROTECTED] Return-Path: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] Received: (qmail 18019 invoked by uid 89); 13 Dec 2002 07:35:09 - Delivered-To: [EMAIL PROTECTED] Received: (qmail 18014 invoked by uid 89); 13 Dec 2002 07:35:08 - Received: from unknown (HELO imo-r03.mx.aol.com) (152.163.225.99) by 207.168.116.85 with SMTP; 13 Dec 2002 07:35:08 - Received: from [EMAIL PROTECTED] by imo-r03.mx.aol.com (mail_out_v34.13.) id r.1d.6703b9c (16214) for [EMAIL PROTECTED]; Fri, 13 Dec 2002 01:39:38 -0500 (EST) Received: from netscape.net (mow-m23.webmail.aol.com [64.12.180.139]) by air-in01.mx.aol.com (v90.10) with ESMTP id MAILININ12-1213013938; Fri, 13 Dec 2002 01:39:38 -0500 Date: Fri, 13 Dec 2002 01:39:37 -0500 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED]
RE: [vchkpw] Adding users
This has been covered, check the archives more :) 1) how are your current accounts held, /etc/password mysql db 2) there is vconvert command that will convert to a usuable format for vpopmail. 3) the archives have an example script you can do if your user names and passwords are in a text file. Search for post from me, as I asked this same question. Joe -Original Message- From: Pat Walsh [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 03, 2002 5:32 PM To: [EMAIL PROTECTED] Subject: [vchkpw] Adding users I've got hundreds of email addresses to migrate from a different server. I can easily add username/passwords using vadduser, but would like to add names to the accounts also. Is there a switch I haven't found? -- Pat Walsh Involved, Inc. http://www.involved.com 503-226-4006
RE: [vchkpw] Webmail Client
Thanks for all your responds, both personal and to the list, this gives me a great start and some great homework. Joe -Original Message- From: Clayton Weise [mailto:[EMAIL PROTECTED]] Sent: Monday, November 25, 2002 12:11 PM To: Vchkpw Subject: RE: [vchkpw] Webmail Client IMP: http://www.horde.org/imp/ Squirrel Mail: http://www.squirrelmail.org SqWebMail: http://www.inter7.com/sqwebmail/ I use IMP and I think it's great. A lot of people like squirrelmail though. I've found that SqWebMail is the fastest of the three, but it doesn't look as cool. -Original Message- From: Joe Oaks [mailto:[EMAIL PROTECTED]] Sent: Sunday, November 24, 2002 11:50 AM To: Vchkpw Subject: RE: [vchkpw] Webmail Client Endymion Mailman, http://www.endymion.com/products/mailman Joe -Original Message- From: rm [mailto:[EMAIL PROTECTED]] Sent: Sunday, November 24, 2002 11:55 AM To: vchkpw mailing list Subject: Re: [vchkpw] Webmail Client On Sun, 2002-11-24 at 13:14, Joe Oaks wrote: Preface I know this is off topic but have asked the webmail clients authors, with no luck? and I'm out of options now :( I have a webmail client installed on my server, and I have inquired of them why it is not working with the virtual domains. I am running RedHat 7.3, qmail-1.03, vpopmail-5.2.1, qmailadmin-1.0.5, and now that I have the virtual domains setup and working great I can't get the webmail client to work. First domain, trells.com set to ip 207.168.116.66 Second domain, mmz.org set to ip 207.168.116.85 Third and fourth, etc... The webmail clients are setup with there own url's and can be gotten to, http://webmail.trells.com and http://webmail.mmz.org under trells.com, I can login and get all my mail just fine, however under mmz.org I try to login and I get authorization failed, now comes the weird part, I can pop both via Outlook with no problems :/ I am in dire need of getting a webmail client that work with vpopmail do you guys know any? I am currently looking into squirrelmail, please let me know if any of you have a different one that works like this :) Joe Sqwebmail works fine for us. What client are you using? rm
[vchkpw] Webmail Client
Preface I know this is off topic but have asked the webmail clients authors, with no luck? and I'm out of options now :( I have a webmail client installed on my server, and I have inquired of them why it is not working with the virtual domains. I am running RedHat 7.3, qmail-1.03, vpopmail-5.2.1, qmailadmin-1.0.5, and now that I have the virtual domains setup and working great I can't get the webmail client to work. First domain, trells.com set to ip 207.168.116.66 Second domain, mmz.org set to ip 207.168.116.85 Third and fourth, etc... The webmail clients are setup with there own url's and can be gotten to, http://webmail.trells.com and http://webmail.mmz.org under trells.com, I can login and get all my mail just fine, however under mmz.org I try to login and I get authorization failed, now comes the weird part, I can pop both via Outlook with no problems :/ I am in dire need of getting a webmail client that work with vpopmail do you guys know any? I am currently looking into squirrelmail, please let me know if any of you have a different one that works like this :) Joe
RE: [vchkpw] Webmail Client
Endymion Mailman, http://www.endymion.com/products/mailman Joe -Original Message- From: rm [mailto:[EMAIL PROTECTED]] Sent: Sunday, November 24, 2002 11:55 AM To: vchkpw mailing list Subject: Re: [vchkpw] Webmail Client On Sun, 2002-11-24 at 13:14, Joe Oaks wrote: Preface I know this is off topic but have asked the webmail clients authors, with no luck? and I'm out of options now :( I have a webmail client installed on my server, and I have inquired of them why it is not working with the virtual domains. I am running RedHat 7.3, qmail-1.03, vpopmail-5.2.1, qmailadmin-1.0.5, and now that I have the virtual domains setup and working great I can't get the webmail client to work. First domain, trells.com set to ip 207.168.116.66 Second domain, mmz.org set to ip 207.168.116.85 Third and fourth, etc... The webmail clients are setup with there own url's and can be gotten to, http://webmail.trells.com and http://webmail.mmz.org under trells.com, I can login and get all my mail just fine, however under mmz.org I try to login and I get authorization failed, now comes the weird part, I can pop both via Outlook with no problems :/ I am in dire need of getting a webmail client that work with vpopmail do you guys know any? I am currently looking into squirrelmail, please let me know if any of you have a different one that works like this :) Joe Sqwebmail works fine for us. What client are you using? rm
[vchkpw] QmailAdmin ?
May not be the right list, but here goes a quick question. qmailadmin, is there a way to set the domain in the login screen so we don't have to keep typing it in? Joe
RE: [vchkpw] QmailAdmin ?
cool, thanks -Original Message- From: Michael Bowe [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 21, 2002 4:56 PM To: 'Vchkpw' Subject: RE: [vchkpw] QmailAdmin ? -Original Message- From: Joe Oaks [mailto:[EMAIL PROTECTED]] Sent: Friday, 22 November 2002 11:35 AM To: Vchkpw Subject: [vchkpw] QmailAdmin ? May not be the right list, but here goes a quick question. The correct list is [EMAIL PROTECTED] qmailadmin, is there a way to set the domain in the login screen so we don't have to keep typing it in? go to the dir where you untarred the qmailadmin source cd html vi show_login.html scroll about 1/2 way down and look for the html like this : input type=text size=14 name=domain maxlength=128 change it to something like : input type=text size=14 name=domain value=mydomain.com maxlength=128 save and exit make make install-strip Michael.
[vchkpw] --enable-ip-alias-domains=y not working?
Hey gurus, need a little help here :) I reconfigured to allow ip-alias-domains but it is not working. I'm still having to login with [EMAIL PROTECTED] instead of trell. trells.com dns entry is 207.168.116.66 wherefore I ran the following vipmap -a 207.168.116.66 trells.com, but when I try to login as trell to mail.trells.com it fails and I have to login as [EMAIL PROTECTED] to mail.trells.com. Did I miss something? Joe
RE: [vchkpw] --enable-ip-alias-domains=y not working?
Well I think I figured it out. If I configure my smtp and pop3 as the ip instead of the dns name e.g. 207.168.116.66 vise mail.trells.com, I guess I will have to just tell the users there IP's instead of dns name. Joe -Original Message- From: Joe Oaks [mailto:trell;trells.com] Sent: Friday, November 01, 2002 12:06 PM To: Vchkpw Subject: [vchkpw] --enable-ip-alias-domains=y not working? Hey gurus, need a little help here :) I reconfigured to allow ip-alias-domains but it is not working. I'm still having to login with [EMAIL PROTECTED] instead of trell. trells.com dns entry is 207.168.116.66 wherefore I ran the following vipmap -a 207.168.116.66 trells.com, but when I try to login as trell to mail.trells.com it fails and I have to login as [EMAIL PROTECTED] to mail.trells.com. Did I miss something? Joe
[vchkpw] Password Aging
Is there a way to implement password aging? Our users need to change there passwords at least twice a year. Currently we use password aging on the /etc/passwd file but are going to migrate to the vpasswd and need this same functionality. Thanks in advance. Joe
RE: [vchkpw] Password Aging
MySQL is out of the question, unfortunately, as we don't have MySQL in our environment and I can't get approval to install it either :( Any other suggestion? Joe BTW, great doc, I can use this for personal use though or other places :) -Original Message- From: Michael Bowe [mailto:mbowe;pipeline.com.au] Sent: Friday, November 01, 2002 3:33 PM To: 'Vchkpw' Subject: RE: [vchkpw] Password Aging If you use the vpopmail with the mysql backend, then you could add an additional column to the table so that each user has a field that stores the date their password was last changed Then you could crontab a daily script that scans the SQL looking for users with old passwords Perhaps email them a warning at 5 months, and then lock them out at 6 months. The lockout could be achieved by setting the NO_POP, NO_WEBMAIL etc flags on their account That way their mailbox will still receive mail, but they just wont be able to pick it up I have some basic info showing how you can setup vpopmail w/mysql backend at http://www.pipeline.com.au/staff/mbowe/isp/vpopmail-mysql.htm Michael. -Original Message- From: Joe Oaks [mailto:trell;trells.com] Sent: Saturday, 2 November 2002 9:49 AM To: Vchkpw Subject: [vchkpw] Password Aging Is there a way to implement password aging? Our users need to change there passwords at least twice a year. Currently we use password aging on the /etc/passwd file but are going to migrate to the vpasswd and need this same functionality. Thanks in advance. Joe
[vchkpw] newbie help?
Hello guru's I recently have been tasked with the project of providing a email solution for a project at work. They currently use sendmail with qpopper for some 500 aliases and send/receive a little more than 400,000 messages a month. Now comes the fun part they are about to migrate the North and South Americas mail.support which is currently housed on Exchange (ewww). So in light of this there sendmail/qpopper will quickly get over ran. I have convinced them to allow me to setup qmail as a solution for them, and they have accepted it, woot. Now I have done some reading and implementing on a test box with the following, qmail + qmailadmin + vpopmail + autoresponder + ezmlm (just incase they want mailing list) + clamav + qmailscanner. All works great, and they love it. Now here is my question to you guys, when I create a virtual domain e.g. mailsupport.hp.com (this has the current 500 aliases) and I start adding users via qmailadmin and the vpopmail, I'm have noticed something I hope you guys can help me fix. Say I create a user called lj4050 (laserjet 4050) his email address is [EMAIL PROTECTED], and his login is [EMAIL PROTECTED], is there a way to make his login just lj4050 and not have the @domain part? Joe Oaks Senior Systems Admin Hewlett Packard
RE: [vchkpw] newbie help?
YES, thank you, will test that in the next 5 minutes. Joe -Original Message- From: Cory Wright [mailto:cwright-dated-1036004280.8a6ee4;standblue.net] Sent: Friday, October 25, 2002 11:58 AM To: [EMAIL PROTECTED] Subject: Re: [vchkpw] newbie help? On Fri, Oct 25, 2002 at 11:26:10AM -0700, Joe Oaks wrote: is there a way to make his login just lj4050 and not have the @domain part? Configure vpopmail with the --enable-default-domain=mailsupport.hp.com option. http://inter7.com/vpopmail/FAQ Regards, Cory Wright
RE: [vchkpw] newbie help?
Hmm, I removed the original install and recompiled with the following... [root@tc3 vpopmail]# ./configure --prefix=/home/vpopmail --enable- qmaildir=/var/qmail --enable-vpopuser=vpopmail --enable-vpopgroup=vchkpw --enable-md5-passwords=y --enable-clear-passwd=n --enable-default- domain=mailsupport.hp.com However when I try vadddomain mailsupport.hp.com 'test' I get the error Domain already exists, and yet there is nothing in the domains directory, and no password file? What did I do wrong? Joe -Original Message- From: Joe Oaks [mailto:trell;trells.com] Sent: Friday, October 25, 2002 12:01 PM To: Vchkpw Subject: RE: [vchkpw] newbie help? YES, thank you, will test that in the next 5 minutes. Joe -Original Message- From: Cory Wright [mailto:cwright-dated-1036004280.8a6ee4;standblue.net] Sent: Friday, October 25, 2002 11:58 AM To: [EMAIL PROTECTED] Subject: Re: [vchkpw] newbie help? On Fri, Oct 25, 2002 at 11:26:10AM -0700, Joe Oaks wrote: is there a way to make his login just lj4050 and not have the @domain part? Configure vpopmail with the --enable-default-domain=mailsupport.hp.com option. http://inter7.com/vpopmail/FAQ Regards, Cory Wright
RE: [vchkpw] newbie help?
Stephen C Burns wrote: It's probably still defined in your ~qmaild/control/virtualdomains file. It may be referenced somewhere else as well, like in rcpthosts, etc, but I think that its presence in virtualhosts is what is confusing vpopmail. Did you delete the domain with vdeldomain or just remove its directory? Removed the entire vpopmail and recompiled (as it only takes a couple of secs). Correct, it was still defined in the virtualdomains file, I have removed it from all the qmail/control files, and re-ran the qmail config, this set the default control files, now there is no entries pertaining to mailsupport. Then I recompile vpopmail, yet when i run the vadddomain i still get Domain already exists. Joe At 03:19 PM 10/25/2002, Joe Oaks wrote: Hmm, I removed the original install and recompiled with the following... [root@tc3 vpopmail]# ./configure --prefix=/home/vpopmail --enable- qmaildir=/var/qmail --enable-vpopuser=vpopmail --enable-vpopgroup=vchkpw --enable-md5-passwords=y --enable-clear-passwd=n --enable-default- domain=mailsupport.hp.com However when I try vadddomain mailsupport.hp.com 'test' I get the error Domain already exists, and yet there is nothing in the domains directory, and no password file? What did I do wrong? Joe -Original Message- From: Joe Oaks [mailto:trell;trells.com] Sent: Friday, October 25, 2002 12:01 PM To: Vchkpw Subject: RE: [vchkpw] newbie help? YES, thank you, will test that in the next 5 minutes. Joe -Original Message- From: Cory Wright [mailto:cwright-dated-1036004280.8a6ee4;standblue.net] Sent: Friday, October 25, 2002 11:58 AM To: [EMAIL PROTECTED] Subject: Re: [vchkpw] newbie help? On Fri, Oct 25, 2002 at 11:26:10AM -0700, Joe Oaks wrote: is there a way to make his login just lj4050 and not have the @domain part?
RE: [vchkpw] newbie help?
OK, finally, after removing everything and reinstalling all, it works. I guess in my original installs I botched something. I have tested and it works great. Thanks, guys Joe This may help, I had a similar problem in the past. This is from a Ken Jones post. Edit /var/qmail/users/assign and remove any entries. run /var/qmail/bin/qmail-newu check /home/vpopmail/domains for a directory of that name. If needed, recursively remove the directory and all it's sub directories. Check /var/qmail/control/* files grep domain /var/qmail/control/* Remove any mention of the domain. Signal qmail-send that the control files have changed. killall -HUP qmail-send The above works on default installations of qmail and linux systems. On Fri, 2002-10-25 at 15:56, Joe Oaks wrote: Stephen C Burns wrote: It's probably still defined in your ~qmaild/control/virtualdomains file. It may be referenced somewhere else as well, like in rcpthosts, etc, but I think that its presence in virtualhosts is what is confusing vpopmail. Did you delete the domain with vdeldomain or just remove its directory? Removed the entire vpopmail and recompiled (as it only takes a couple of secs). Correct, it was still defined in the virtualdomains file, I have removed it from all the qmail/control files, and re-ran the qmail config, this set the default control files, now there is no entries pertaining to mailsupport. Then I recompile vpopmail, yet when i run the vadddomain i still get Domain already exists. Joe At 03:19 PM 10/25/2002, Joe Oaks wrote: Hmm, I removed the original install and recompiled with the following... [root@tc3 vpopmail]# ./configure --prefix=/home/vpopmail --enable- qmaildir=/var/qmail --enable-vpopuser=vpopmail --enable-vpopgroup=vchkpw --enable-md5-passwords=y --enable-clear-passwd=n --enable-default- domain=mailsupport.hp.com However when I try vadddomain mailsupport.hp.com 'test' I get the error Domain already exists, and yet there is nothing in the domains directory, and no password file? What did I do wrong? Joe -Original Message- From: Joe Oaks [mailto:trell;trells.com] Sent: Friday, October 25, 2002 12:01 PM To: Vchkpw Subject: RE: [vchkpw] newbie help? YES, thank you, will test that in the next 5 minutes. Joe -Original Message- From: Cory Wright [mailto:cwright-dated-1036004280.8a6ee4;standblue.net] Sent: Friday, October 25, 2002 11:58 AM To: [EMAIL PROTECTED] Subject: Re: [vchkpw] newbie help? On Fri, Oct 25, 2002 at 11:26:10AM -0700, Joe Oaks wrote: is there a way to make his login just lj4050 and not have the @domain part?
RE: [vchkpw] no solution that problem
and other problem is i want to change message when mail bounce back to user ,is it possible to change the message. i want to change this message for this when you compile qmail, edit the qmail-send.c file... yep that would require a rebuild :/ Joe
RE: [vchkpw] F1 F1 F1 .... WANTED
wrong mailing list, this is a qmail question, try [EMAIL PROTECTED] Joe -Original Message- From: [EMAIL PROTECTED] [mailto:administrator;honda.com.pk] Sent: Friday, October 25, 2002 8:43 PM To: [EMAIL PROTECTED] Subject: [vchkpw] F1 F1 F1 WANTED Hi Guys ! I'm running Qmail + Vpopmail Qmailadmin under Daemontools and Tcpserver env. During the installation of Qmail Vpopmail I applied qmail-toaster-0.4.2-patch for Smpt-Auth support by qmail-smtpd and MailDir quota support by qmail-pop3dbut prob is when qmail-smtpd receives mail from network it does not verify serder's mail address wether it's a valid domain address or not... to fix this prob I tried to apply SPAMCONTROL patch to qmail-smtp for DNS Stub-resolver... but I cannot apply this coz of Qmail-toaster patch... would u pls tell me how can I apply both of these patches together. Thanx. --regards Zaman.
