RE: The evidence for nano-powder welding as one of Rossi’s secrets is strong
but circumstantial in the 10kw unit whose reaction vessel volume is 1 liter.
In one recent demo of the 10-kw Cat-e, a short output power excursion
occurred where the input output ratio went over 1600 during the 130 kW
Hi Damon,
I hope your piping is better than class 150, and your fittings better than
schedule 40. Preferably you would want to use class 3000 pipe and schedule
80 fittings of 316/316L stainless steal. The strength of stainless steal
Thank you for the safety concern. I'm using schedule 40 pipe
You can buy commercial pressure relief valves which will prevent an
explosion. See globalspec.com
T
What are the exact details of your setup and runs so far?
In mutual service, Rich Murray
rmfor...@gmail.com 505-819-7388
On Thu, Jul 21, 2011 at 9:33 AM, ecat builder ecatbuil...@gmail.com wrote:
Hi Damon,
I hope your piping is better than class 150, and your fittings better than
schedule
A few replies:
Terry: Thanks for the link. If I start to see pressure exceed 300PSI (20
bars) I'll think about a rupture disk (but at what pressure?). So far I'm
pressurizing up to 150 PSI (10 bars) and with mild heating it has not
increased more than a few PSI. (I haven't logged pressure very
Brad,
Shouldn't an EM be applied into the powder? Loading with gas only won't work.
I will attempt to address this question from ecat builder:
“Does the catalyst convert hydrogen to H+? Is there something else to try?
What would you like to see tried for a catalyst?”
First some background quoted from ecatrepor:
“although one might first think “the finer the
Hi Axil: As usual, very interesting.. and way over my head.. Dimpling
and bringing something up to the temperature of melting stainless
steel is beyond my ability.. but hopefully others are listening and
can try..
I'm not sure that powder coating the reactor wall is required to get
transmutation.
The evidence for nano-powder welding as one of Rossi’s secrets is strong but
circumstantial in the 10kw unit whose reaction vessel volume is 1 liter.
First, the 100 gram pure nickel nano-powder fills only 1% of the volume of
this one liter reaction vessel. This small amount of powder cannot
I hope your piping is better than class 150, and your fittings better than
schedule 40. Preferably you would want to use class 3000 pipe and schedule
80 fittings of 316/316L stainless steal. The strength of stainless steal
decreases rapidly with an increase in temperature. I imaging, the same is
It took me nearly 2 months to reverse enineer it, and come up with a parts
list.
On Mon, Jul 18, 2011 at 3:34 PM, Jed Rothwell jedrothw...@gmail.com wrote:
It took Rossi 15 years and hundreds of tests to figure out how to make this
work. Highly experienced experts are trying to replicate him,
ecat builder ecatbuil...@gmail.com wrote:
I have been trying to replicate the E-Cat transmutations in an open-source
kind of way and I'm ready to start asking the community for suggestions on
how to proceed.
It took Rossi 15 years and hundreds of tests to figure out how to make this
work.
Good degassing references can be found in the Stremmenos interview on the
22Passi Blog:
http://22passi.blogspot.com/2011/05/stremmenos-cold-fusion-will-solve.html?m=1
Also, references can be seen in Brian Ahern's replication efforts.
Stremmenos observes that the oxidization coating the nano
At 06:13 PM 7/18/2011, ecat builder wrote:
I created a simple wordpress blog where I will try to follow
replicators. (http://ecatbuilder.comecatbuilder.com) I will write
about my research and say what works and what doesn't. Hope to hear
from those with constructive ideas for experiments. If
Be careful about high electric power inputs into a resistor in water
in a small metal cell -- complex thermal corrosion, for example,
cracks in resistor at high temperatures, may lead to electric shorting
and arcing and explosion of the resistor, leading to disruption,
chemical reaction, and
15 matches
Mail list logo
