CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/11/19 13:27:42
Log message:
SiS driver:
- Fix palette bug in dual head mode (wrong palette on CRT2)
- Reorder startup code to avoid garbage on screen during start
Modified files:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/11/19 20:03:43
Log message:
This file is used only by X-TrueType, so move it there.
Added files:
xc/lib/font/X-TrueType/:
ft_conf.h
Removed files:
xc/lib/font/FreeType/:
Hi all,
I need some help. For debugging purposes I want to build a server that is loadable, except
for the glx module which should be statically linked in. How do I do this?
TIA,
Frank.
--
Frank Giessler
Klinikum der Universitaet Jena Tel.: +49-3641-9 32 57 80
Biomagnetisches
Can I just substitute the object modules or do I need to compile from source
all of xfree86?
Thanks,
Tom Corner
On 17-Nov-2003 Alex Deucher wrote:
The patch available below adds dynamic power management support
(dynamic clock scaling) to the radeon driver. It is based on code I've
been
On Sun, 16 Nov 2003, Salvio wrote:
I have attached the latest config file and log.
I was incorrect in stating #1: I was testing the system disabling
acceleration (option accel no) to see if I could notice any
difference.
The attached log is the one corresponding to the attached config.
Short answer:
same thing, still superslow.
Long answer:
That is indeed what I tried... after re-reading my initial post I
realised I didn't specify which X terminal was I using.
The numbers are pretty much the same regardless of the terminal I use
although the system seems slightly more
On Wed, Nov 19, 2003 at 09:01:32AM +0100, Frank Gießler wrote:
Hi all,
I need some help. For debugging purposes I want to build a server that is loadable,
except
for the glx module which should be statically linked in. How do I do this?
You'll need to modify Xserver/Imakefile to include the
I want to write a simple task bar application (such as at the bottom of
KDE/Gnome/Windows) in Qt that will be a simple button group, and add and
remove buttons as applications on the same display start up and shut
down. Clicking on a button would raise the associated window.
To subscribe to
The attached patch adds alpha blending support to the video overlay on
radeon hardware. It's been tested on my 9200. It adds three new Xv
attributes: XV_ALPHA_MODE, XV_GR_ALPHA, and XV_OV_ALPHA.
XV_ALPHA_MODE - (0 or 1) selects the alpha blending mode. right now it
only supports key and global
if you are running a cvs snapshot you can just copy the radeon_drv.o
and ati_drv.o into your current installation. If you are running
4.3.0, they should still work, but you will need to get a newer version
of the XFree86 binary. one is available here for instance:
Hello sir, i Hemalatha studying in International Institute of InformationTechnology..i am doing one project on palm computer. i want a font convertor formtrue type to bitmap fonts or a font convertor from English to local language on Palm computer, can you help in this regard. please replyas soon
Hi,
The original i18n part of Xlib is very iso-2022 oriented and lately added
Unicode support doesn't fit its design well. It assumes that in every locale
the whole range of mutibyte codes can be divided to some non-overlaped
charsets (strictly speaking it usualy deals with GL/GR halfs of
On Wed, Nov 19, 2003 at 07:37:01PM +0600, Ivan Pascal wrote:
It can be a bug. But I don't know all conditions. Can you give some example
code or just tell what pattern and what locale were used in that case.
LC_CTYPE=fi_FI.UTF-8 all the time.
User request:
Hi all,
I used to run X windows without any hassles on my Debian Woody systemwith nVidia Riva TNT M64 card.
Recently I compiled the tarballs of the version 4.3.0. Now startx doesn't open the x window.
I have googled quite a bit for this, but has been unsucessful. Can any kind soul help.
I am
Title: E-mail message content
Sponsor: princesacaballero
IXP.net
http://www.ixp.net/princesacaballero
Hola, conoce nuestro Servicio de Acceso a Internet. Esta no es una promocion, estos si son nuestros precios.
Conoce nuestro Acceso a Internet Ilimitadoo, sin problemas de horas u
Another question. Can you specify agp 8x for the radeon 9200
Thanks again,
Tom Corner
On 17-Nov-2003 Alex Deucher wrote:
The patch available below adds dynamic power management support
(dynamic clock scaling) to the radeon driver. It is based on code I've
been testing from Hui Yu. It seems
Hi all,
I used to run x window on my Debian Woody (intel pentium-4 1.6 ghz, 256 mb ram and 845
motherboard) using my nvidia riva tnt m64 card. the nvidia drivers (4191) tarballs
were downloaded and compiled on my pc.
Recently, I upgraded x windows to xfree86 4.3.0. This was also downloaded
Can I just substitute the object modules or do I need to compile from source
all of xfree86?
Thanks,
Tom Corner
On 17-Nov-2003 Alex Deucher wrote:
The patch available below adds dynamic power management support
(dynamic clock scaling) to the radeon driver. It is based on code I've
been
On Wed, Nov 19, 2003 at 04:54:52PM +0300, Yuri Ushakhow wrote:
Hello.
I have the following xkb-related info in /etc/X11/XF86Config:
Option XkbRulesxfree86
Option XkbModelpc101
Option XkbLayout us,ru,el
Option XkbOptions grp:caps_toggle,grp_led:caps
Take a look at the XF86Config man page. You can find out exactly which
XAA routine is causing the bug by trying the different XAANo
oprions, where XXX is the acceleration routine. they are listed in the
man page.
Alex
--
Hello XFree team,
I sent a mail some days ago
See bug 798:
http://bugs.xfree86.org/show_bug.cgi?id=798
just to follow up to the mailing list, this bug appears to be the
same issue that i am seeing that was fixed in the linux framebuffer
code but the fix needs to be done in the xfree86 driver.
i have re-opened the bug and uploaded my
Nick Patavalis wrote:
Problem is, I can switch to Greek and type all of the lower and upper
case letters, but not those with accents. I figure, addition of accents
[skip]
You need to set the correct LOCALE (or at least the correct CTYPE)
before starting your clients. So:
export LC_CTYPE=el_GR
On Wed, Nov 19, 2003 at 05:40:58PM +0300, Yuri Ushakhow wrote:
Like this?
$ LC_CTYPE=el_GR mozilla
Yes like that
It says:
Gdk-WARNING **: locale not supported by C library
No running window found.
Ooops! If your libc does not support the Greek locale, you 're in
trouble. What
Hi Larry,
I am in the same boat. I have an old PowerMac 8500
that has onboard video (one of two Ati choices, but I
can't tell which exactly) and an even older fixed res.
display (it's a Sony Trinitron, but it has the Apple
video connector, DB-15, I believe) 832 x 624.
In trying to use this
On Mon, 17 Nov 2003, Charles Lujan wrote:
Running XFree86 4.3 on a powepc-based IBM p615 RISC. I recompiled from
source, and am now trying to start X. I've configured the XF86Config to
look at my card, which is a Matrox G400 AGP. /proc/pci shows the card
at 'Bus 290, device 0,
Hello,
I'm writing a program that turns joystick button presses and axis movements
into X events via XTestFakeKeyEvent(). What I need to know is how to make
the code snippet below act exactly like if I had held the 1 key (keycode
10) for 5 seconds. Any help appreciated. And yes, the code below
FROM: BAR.TEMBA TAYLOR MBU
WILLIAMS COOKEY CO CHAMBERS.
Urgent Assistance.
I am Barrister TEMBA TAYLOR MBU, a solicitor at law. I am
the personal attorney to Mr. Douglas Forman a
national of our country, who used to work with shell
development company in Nigeria.
Before his death On the 21st
We can't support NVIDIA's binary drivers. Only NVIDIA can do
that. We can help you get the nv driver that comes with XFree86 to
work though.
Mark.
PS. NVIDIA's 4191 drivers suck. If you are going to be using
NVIDIA's binary drivers you should be
Even if my external monitor can support higher refresh rates i always get
60Hz output (even if the modelines states otherwise)
If i change to 800x600 (deleting 1024x768 in XF86Config-4) i still get
60Hz on my monitor.
It seems to me that there's something strange in siliconmotion drivers...
Hello everybody,
I installed XFree 4.3.0 on a FreeBsd 5.1
When i type startx, i have these message :
# startx
xauth: (argv):1: bad display name :0 in list command
Using authority file /root/.Xauthority
xauth: (stdin):1: bad display name :0 in add command
xauth: (argv):1: bad display name :0
Hi,
The combination of the files:
xc/lib/fontconfig/Imakefile
xc/extras/fontconfig/Imakefile
result in the wrong fontconfig version: 1.0 - instead of 2.1.0!
In addition I would like to propose an update to 2.2.x since some
GNOME packages start to require it ... I could attach a patch if
I've found out what the problem was and solved it. Thanks a lot. :D
Best regards,
Paulo Matos
On Tue, 2003-11-18 at 20:30, Paulo Jorge de Oliveira Cantante de Matos
wrote:
Hi all,
I've upgraded my kernel, using a radeon 7500 mobility. However I lost
DRI. Now direct
rendering is off and I
On Thu, Nov 13, 2003 at 01:24:53PM -0500, George Georgalis wrote:
I'm able to use my usb mouse with gpm, /etc/gpm.conf contains:
device=/dev/input/mouse0
responsiveness=10
repeat_type=raw
type=autops2
append=
sample_rate=
however XFree86 can not use it
Section InputDevice
Identifier USB
On Wed, Nov 19, 2003 at 09:08:25PM +0100, Rene Rebe wrote:
Hi,
The combination of the files:
xc/lib/fontconfig/Imakefile
xc/extras/fontconfig/Imakefile
result in the wrong fontconfig version: 1.0 - instead of 2.1.0!
I'll commit a fix to xc/lib/fontconfig/Imakefile for that. The
version
Alex Deucher wrote:
Take a look at the XF86Config man page. You can find out exactly which
XAA routine is causing the bug by trying the different XAANo
oprions, where XXX is the acceleration routine. they are listed in the
man page.
Cool, thanks a lot!
It works well with the option
Not sure if this is the place for bugs, in fact i really think it's
[EMAIL PROTECTED] so i'll cc it to them too.
It might have been mentioned already but the cvs head is not up to date
with freetype2 2.1.7 Many XFT and freetype related source and header
files have #include freetype/freetype.h
On Wed, Nov 19, 2003 at 07:47:04PM -0500, Ed Sweetman wrote:
Not sure if this is the place for bugs, in fact i really think it's
[EMAIL PROTECTED] so i'll cc it to them too.
It might have been mentioned already but the cvs head is not up to date
with freetype2 2.1.7 Many XFT and freetype
Title: inquiry
hi all,
i'm newbie to linux os, and want some help, how can i join such groups such as comp.os.linux.
any help would be appreciated thanks.
regards,
joseph
Hi saw
thanks for the suggestion, it worked!
Mohammed
From: Hacksaw [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Fatal server error: no screens found Date: Mon, 17
Nov 2003 20:54:57 -0500
Mohammed:
It seems like there isn't a driver for this
if you are running a cvs snapshot you can just copy the radeon_drv.o
and ati_drv.o into your current installation. If you are running
4.3.0, they should still work, but you will need to get a newer version
of the XFree86 binary. one is available here for instance:
David Dawes wrote:
On Wed, Nov 19, 2003 at 07:47:04PM -0500, Ed Sweetman wrote:
Not sure if this is the place for bugs, in fact i really think it's
[EMAIL PROTECTED] so i'll cc it to them too.
It might have been mentioned already but the cvs head is not up to date
with freetype2 2.1.7 Many
On Wed, Nov 19, 2003 at 11:19:01PM -0500, Ed Sweetman wrote:
David Dawes wrote:
On Wed, Nov 19, 2003 at 07:47:04PM -0500, Ed Sweetman wrote:
Not sure if this is the place for bugs, in fact i really think it's
[EMAIL PROTECTED] so i'll cc it to them too.
It might have been mentioned already
David Dawes wrote:
On Wed, Nov 19, 2003 at 11:19:01PM -0500, Ed Sweetman wrote:
David Dawes wrote:
On Wed, Nov 19, 2003 at 07:47:04PM -0500, Ed Sweetman wrote:
Not sure if this is the place for bugs, in fact i really think it's
[EMAIL PROTECTED] so i'll cc it to them too.
It might have been
44 matches
Mail list logo