CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/03/17 01:32:51
Log message:
978. Fix bug in trident driver that caused old Cyber 9382/9385 chipsets
to display half a jittered screen (Alan Hourihane).
Modified files:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/03/17 15:52:28
Log message:
979. Fix typo that caused incorrect initialization of xkb memory
(John Heasley).
Modified files:
xc/programs/Xserver/xkb/:
xkbInit.c
Other than that I've never seen an XFree86_DDC_EDID2_RAWDATA property,
so would be interested to see your log file.
Unfortunately, I have been unable to reproduce this result. I swapped
out My Mistubishi Diamond Pro 2060u for a Lacie electron 19b IV for some
other testing. When I put the 2060u
On 17 Mar 2003, Ben Guthro wrote:
However, I'm still left with the dilemma of being unable to inventory
all the monitors on the system. I realize that the network transarency
schema says that in some instances this does not make sense to do.
However, in Windows, Mac OS9, and OS X there is a
I know that drivers for several dual head cards don't correctly return
the EDID info for both displays; do the other OSes you mention get this
right ?
Yes, they do.
What does EDID info even mean on a laptop display - my laptop BIOS
doesn't return EDID info for the builting screen, but does
On 17 Mar 2003, Ben Guthro wrote:
This looks like a driver problem - does the DDC work if you
driver this card as a single head ?
yes. When I remove the ATI Radeon 7500, the i810 correctly gets an EDID.
Do you get both EDIDs if you make the i810 the first head in your
XF86Config ?
---
On 17 Mar 2003, Ben Guthro wrote:
I've hooked up a dual head system with two ATI cards (r128 and mach64)
and confirmed that
xprop -display :0.0 -root 8x XFree86_DDC_EDID1_RAWDATA
and
xprop -display :0.1 -root 8x XFree86_DDC_EDID1_RAWDATA
do report the correct EDID info for
In xc/programs/Xserver/hw/xfree86/CHANGELOG
754. Fixed VBE EDID read: due to a missing register setting read
ended in endless loop on certain systems (Egbert Eich).
On a good day an endless loop would be aborted.
It would be worth trying v4.2
I am currently running version 4.2.0 (18
I'm trying to make autodetection of flat panels work better
in the nv driver. I notice that when you call x8686I2CBusInit()
it probes the DDC info, but I need to probe once, change some
HW state so it uses the other head's bus and then probe again.
What is the correct way to do that? That
I'm finding that xfig crashes my XFree86 server (4.3.0)
when running the trident driver on my Toshiba Satellite Pro 4600 /
FreeBSD 4.7-R system.
The last messages I get before the server goes away:
xfig3.2.4: SIGHUP signal trapped
xfig3.2.4: X error trapped - error message follows:
32
Request
! If it's reproducible and you can get a gdb backtrace, that would
!be useful. Baring that, seeing it if goes away with Option NoAccel
!would at least narrow things down.
I've given gdb a spin, but don't get much satisfaction from its output
(perhaps due to my vast inexperience with it!)
hi!
after updating to xfree86 version 4.3.0, my opera browser just displays
squares (or nothing) at the control bars, the favorites, etc., however, the
webpage is displayed correctly.
i use suse 8.1 professional and the opera version 6.03-266.
does anyone know what's the problem or could
Danilo Segan wrote:
It all works fine, but the problem arises with the usage of CTRL+key
combinations. If I put en_US as the first group, then they use keys from
group1 no matter what group is active. But, in any other case, they use
the key mappings from the current group.
There is an
On Mon, Mar 17, 2003 at 07:03:13PM +0600, Ivan Pascal wrote:
There is an XKB feature that is completely undocumented, unfortunatly.
The XLookupString (and so X{mb|wc}LookupString too) procedure having Control
modifier in a key event tries to make a 'controlized' code from the symbol
got
Ivan Pascal wrote:
Danilo Segan wrote:
It all works fine, but the problem arises with the usage of CTRL+key
combinations. If I put en_US as the first group, then they use keys from
group1 no matter what group is active. But, in any other case, they use
the key mappings from the current
For the time being, at least some of Ctrl/Alt dance can be achieved
using higher levels, so here are my problems.
In the currently designed sixlevel type (one at
http://www.kvota.net/srpski/1.5/sixlevel), where LCTL is
modifier_map-ed to Mod4, it works as expected (it does select level
five)
Danilo Segan wrote:
...
At least, if you opt for your suggestion of *_FALLBACK_TO, it would be
nice to be able to set this through keymaps, by using -option
parameter to setxkbmap (or in XF86Config):
setxkbmap -layout sr,yu,en_US -option
grp:shift_toggle,alt-fb:1,ctl-fb:3
Now that I think of
can you tell me if it is normal to have
DEFAULT.SFM, DEFAULT4.SFM, DEFAULT8.SFM, fileson my system folder running
XP Pro...not set up for networking???
thank you
* Aleksandar Simonovski ([EMAIL PROTECTED]) wrote:
That's my config:
http://deimos.one.pl/ftp/conf/XF86Config_xfree86-4.3.0
can you please send the XF86Config file by mail because i can get it from the
link (connection timeout)
On the server:
[EMAIL PROTECTED]:~$ uptime
9:40am up 20
Express Recovery Systems
Your Overnight Carrier Owes You Thousands Of Dollars!
How would you like to recover thousands of dollars owed to you by Fed Ex or UPS? Are
you aware that up to 10 % of all packages are delivered late? When this happens you
are owed a full refund. The problem for you
Express Recovery Systems wrote:
Express Recovery Systems
Your Overnight Carrier Owes You Thousands Of Dollars!
How would you like to recover thousands of dollars owed to you by Fed Ex or UPS? Are you aware that up to 10 % of all packages are delivered late? When this happens you are owed a full
What video card do you have? It may not be supported.
-Original Message-
From: Balakrishnan Sathish [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 15, 2003 10:55 AM
To: [EMAIL PROTECTED]
Subject: [XFree86] X Server Error
___
XFree86 mailing
when using the xfree86 3.3.X series i had no trouble with color allocation
and could easily display xpms in the root window. since upgrading to 4.2.X i am
unable to set a root window image and get many messages about X being unable
to allocate colors.
Before i compile 4.3.0, i wanted to find out
Hi,
I am new to linux/openbsd/x-windows. I installed
XFree86 4.30(binaries downloaded from Xfree86.org) on
OpenBSD 3.2 on IBM A31p laptop with radeon 7800
1.8ghz. Both startx and xdm fail. i found out from the
message that it was using some
/lib/libexec/libxft.so.2.1 referenced in ld.so. I have
Is there any product that could reduce the X11 trafic
load on a low speed line (as can do the Citrix ICA
client for example)
Thanks for any info
-
SPECIAL ADSL
L'ADSL à partir de 15,95 EUR/mois et le modem ADSL offert ? C'est en exclusivité chez
Tiscali !
Pour profiter de cette
vncserver as at www.tightvnc.com
Tom
On Mon, 17 Mar 2003, [iso-8859-1] [EMAIL PROTECTED] wrote:
Is there any product that could reduce the X11 trafic
load on a low speed line (as can do the Citrix ICA
client for example)
Thanks for any info
-
SPECIAL ADSL
L'ADSL à partir
Hello, This morning a person in my office just unplugged my server from
the UPS. I booted the server three times and xfree told me to send you
the log for what happened. I have attached the log for you to look at.
It doesn't look as nice and organized as a usual log file. I really hope
you can
On Mon, 17 Mar 2003, [EMAIL PROTECTED] wrote:
Is there any product that could reduce the X11 trafic
[snip]
lbxproxy. It's part of Xfree86.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Your font server isn't running. (xfs)
-Original Message-
From: Matt Mahoney [mailto:[EMAIL PROTECTED]
Sent: Monday, March 17, 2003 11:39 AM
To: [EMAIL PROTECTED]
Subject: [XFree86] xfree server problem
___
XFree86 mailing list
[EMAIL
The server crash seems to be an incompatibility between Xfree86 and RTAI.
With the RTAI real-time extension driver (which my main application
requires) unloaded, I get the same result as you (ran for about 5 hours then
crashed with out of memory). I was investigating the memory leak when I
I'm building a new computer and thought maybe the X experts could give me their advice on which is the best video card with the best support under X. Basically I'm looking for highest resolution:color depth and easy setup under X. Thank you.
Do you mean string the xserver? just type startx . I believe you can
also give options like startx kde to start kde, but if it doesn't work
look at the manpages( man startx en press q to leave the manpage)
Matt Mahoney wrote:
Do you by chance know the command to start it? I am somewhat a
On Fri, 14 Mar 2003, Mark Vojkovich wrote:
Has it been firmly established that this is a regression
and 4.2 worked fine on those machines?
You can verify this by using the generic int10 module from one of our ix86
binary packages for 4.2.0 or 4.2.1.
It's not clear to me that you
Where would I find the font fixed for my x font server? My server will
not start because it is missing.
Matt Mahoney
Web Developer
[EMAIL PROTECTED]
ems-i.com
801-302-1400 Phone
801-302-1160 Fax
___
XFree86 mailing list
[EMAIL PROTECTED]
Is what has happened is somehow the font fixed has been lost, and it
will not start without it. I am trying to find the RPM that contains it
right now. I am using Mandrake 9.0 if anyone knows where to get it or
which RPM from the disk to use.
-Original Message-
From: [EMAIL PROTECTED]
I am using some older applications that use xlib to open up and write
into windows.
They work fine on other X systems (e.g. on SUNs und CDE), and older
versions of
Linux but for new version of XFree 86, the following two problems occur:
- There is no buffering of the window content, ie. when
Help
I have downloaded the latest nvida and installed.
I run RedHat 8.?? and upgrade it about once a week.
Stan
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is
Setup: ATI Radeon7200 64MB ViVo, Slackware8.1, XFree86 4.2.0
Successfully sent signal to TV out with mplayer running from tty using vesa
driver.
Question: When Linux and the card are definetly capable of sending the screen
output to the TV, why isn't it possible with X?
(installing Gatos did not
Following the advice of an install guide, I made a clean install of Debian
(woody) without running tasksel or dselect. The install guide then assumes
you're going to download Xfree86 and KDE from the internet using apt-get.
This workstation, however, is not connected to the internet.
I downloaded
Do you by chance know the command to start it?
XFS(1) - X font server (USEAGE: xfs [-config configuration_file] [-port
tcp_port])
http://www.mcsr.olemiss.edu/cgi-bin/man-cgi?xfs+1
CHKFONTPATH (8) a simple interface for adding, removing, and listing
directories in the X font server's path.
Is what my problem is that I have somehow lost my fixed font in my
/usr/X11R6/lib/X11/fonts/misc folder which is preventing x from
starting.
Does anyone know where to get this font? I cannot find it anywhere.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
On Mon, 17 Mar 2003, GoTaR wrote:
On Sun, Mar 16, 2003 at 16:51:33 -0500, Mark Vojkovich wrote:
I want to reduce memory being used in order to use the rest as a
ramdisk.
I don't understand that. What does reducing the amount of
videoram have to do with a ramdisk?
Ramdisk
On Mon, 17 Mar 2003 [EMAIL PROTECTED] wrote:
when using the xfree86 3.3.X series i had no trouble with color allocation
and could easily display xpms in the root window. since upgrading to 4.2.X i am
unable to set a root window image and get many messages about X being unable
to allocate
I just upgraded to X 4.3.0 and in the process of debugging something else,
I saw this error in my logs..
(EE) RADEON(0): Virtual height (0) is too small for the hardware (min 128)
(EE) RADEON(0): No valid mode found for CRTC2 clone
I searched google and it seems to be something wrong with the
I just installed Xfree-4.3.0 package from Slackware-current.
I've encountered one problem with loading the macedonian keyboard
layout. I'm using the setxkbmap command:
setxkbmap -layout mk -option compose:rwin -option grp_led:scroll \
-option grp:menu_toggle -option grp:lwin_switch
I also
On Mon, Mar 17, 2003 at 03:08:35PM -0500, Mark Vojkovich wrote:
On Mon, 17 Mar 2003 [EMAIL PROTECTED] wrote:
when using the xfree86 3.3.X series i had no trouble with color allocation
and could easily display xpms in the root window. since upgrading to 4.2.X i am
unable to set a root
this has existed since at least 3.3.4 and does not appear to be fixed in
4.2.0.
situation: pointer determines window focus is on ( window that pointer
touches rises to top), there are 2 windows that overlap on the screen.
problem: if the pointer sits in the area of overlap, neither window
I experience the following problem during installing 4.3.0.
Is there any solution to it.
My video card is:
Stealth II S220 Vers 1.31 (c) Diamond Multimedia Systems 4MB
- Original Message -
From: root [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 17, 2003 9:52 PM
Subject:
On Mon, 17 Mar 2003, Frederik Tilmann wrote:
I am using some older applications that use xlib to open up and write
into windows.
They work fine on other X systems (e.g. on SUNs und CDE), and older
versions of
Linux but for new version of XFree 86, the following two problems occur:
-
On Mon, 17 Mar 2003 [EMAIL PROTECTED] wrote:
On Mon, Mar 17, 2003 at 03:08:35PM -0500, Mark Vojkovich wrote:
On Mon, 17 Mar 2003 [EMAIL PROTECTED] wrote:
when using the xfree86 3.3.X series i had no trouble with color allocation
and could easily display xpms in the root window. since
We need to see your /var/log/XFree86.0.log file.
The below information isn't helpful.
Mark.
On Mon, 17 Mar 2003, Michael A.S.G. Joergensen wrote:
Hi,
I have just installed Gentoo GNU/Linux on my computer. I have installed
XFree86 version 4.30.0 When I try to
On Mon, 17 Mar 2003, Scott Gilbertson wrote:
So my new question is, what is there
about the X server that could be affected by the real-time extensions?
Nothing obvious to me. If the server actually segfaulted you
should be able to see why in the debugger. If you can't, then I
think
The permissions on your server are wrong. I haven't really
been paying attention to how this stuff works these days and
there are security implications of doing it incorrectly.
A solution, though undoubtedly the wrong one is to, as root do:
chmod +s /usr/X11R6/bin/XFree
XFree86 Bug/Test Report Form
Please fill in as many of the fields a possible, and return this form to
[EMAIL PROTECTED] Replace the comments in [] with your own text.
VERSION:
4.3.0
VIDEO DRIVER:
[i830]
OPERATING SYSTEM:
[Linux Mandrake 9.0/9.1rc2]
VIDEO CARD:
Regarding: Looping message Console log for localhost.localdomain after upg to 4.3.0
Email: [EMAIL PROTECTED]
XFree86 Version: 4.3.0
OS: RedHat 8.0
Area: Xserver
Server: XFree86 (The XFree86 4.x server)
Video Card:
SiS 315PRO AGP
I have a laptop with a touchscreen and, as such, it behaves as a
single-button mouse. Is there any way I can set up X (xkb?) so that I
can use a key on the keyboard to select whether a tap on the screen is
equal to a left, middle, or right button?
In other words, can I set up a keyboard modifier
Hi,
FreeBSD 4.7-STABLE, Xfree86 4.3.
Matrox G550, Iiyama AU4831D (DVI cable).
Problem: X comes up with seemingly little/no
complaints. But screen is blank (with no
signal digital port message) in native
1600x1200 resolution.
I can successfully C-A-+ to 1280x1024
and other modes.
Any help on
Thats my problem too using the savage driver.
On Mon, 2003-03-17 at 16:20, Eugene Ostapkovich wrote:
XFree86 Bug/Test Report Form
Please fill in as many of the fields a possible, and return this form to
[EMAIL PROTECTED] Replace the comments in [] with your own
I've stared at the radeon manual page from 4.2.99.902 for quite a while
now and tried a few things, but I don't think I'm getting the config
quite right to tell X that I want to use both ports of my dvi/vga
radeon7500 in xinerama mode. Anyone have a working config file you
could share?
I'm
Same problem here.
VERSION:
4.3.0
VIDEO DRIVER:
Radeon
OPERATING SYSTEM:
[Debian Linux 3.0 (woody)]
VIDEO CARD:
[ATI]
MODEL:
[ Radeon 7800 FireGL]
GRAPHICS CHIPSET:
[ATI]
RAMDAC:
[Usually only relevant for old cards]
Xfree86.0
XFREE86.0
Description: Binary data
Your server is configured to run a font server yet one is not
running. I think RedHat had a tool ntsysv? that allowed you
to start the font server xfs as well as other services.
Mark.
On Mon, 17 Mar 2003, Krzysztof wrote:
Xfree86.0
Express Recovery Systems
Your Overnight Carrier Owes You Thousands Of Dollars!
How would you like to recover thousands of dollars owed to you by Fed Ex or UPS? Are
you aware that up to 10 % of all packages are delivered late? When this happens you
are owed a full refund. The problem for you
Hi
Ich habe eine megaüberaschung für Dich!!! Hypergeilheit garantiert
http://halloistdajemand.supereva.it/camstart.txt
Das solltest Du auf keinen Fall verpassen.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Ok my /var/log/XFree86.0.log file contains this
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gentoo-r1 i686 [ELF]
Build Date: 15 March 2003
Before reporting problems, check http://www.XFree86.Org/
That's odd. It didn't get very far. It looks like something
killed it. How about running
XFree86 -verbose -verbose -verbose
Output usually continues like:
(II) Loader running on linux
(II) LoadModule: bitmap
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap:
Hi,
I have a Sony portable with I850 graphic chip running Redhat 7.3 configured
by EmporerLinux (which is fine, running 2.4.20) running v4 of X. I am also
developing under RtLinux which is currently based on 2.4.16. The RtLinux
folks say that Xv4 won't run on 2.4.16; EmporerLinux says that it
Hi,
I saw that some folks were working on a driver for the ATI IGP 320/340 a while
back. What's the status of this driver? Is it going to be in the next point
update of X? I'm willing help test it, if the author wants to mail it onto
me. (I've got a bunch of laptops running 4.3 that are good
Bill, could you please post your XF86Config file? I'm still getting an
awful display...
Thanks!
On Sun, 2003-03-16 at 08:59, William Gallafent wrote:
On Sun, 16 Mar 2003, Idan Gazit wrote:
I'm not shy of cvs and recompilation
That's lucky :)
Apply this patch to 4.3.0 (or current CVS),
Hello,
I am having problem starting the Xwindow server on my Linux box. Everything
has been rnning ok for weeks. After a reboot I get the following message:
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
I
70 matches
Mail list logo