On Sun, 29 Oct 2006, Mark Vojkovich wrote:
-Were the GLX or DRI modules loaded in this case? I still suspect
- a DRI or GLX bug, mostly because I haven't seen this with NVIDIA drivers
- which don't use the XFree86 dri or glx modules.
Yes, as this machine (the i810 one) didn't have
Here's the same type crash as was happening with the S3 VirgeDX chipset, only
this time on i810. No mention of glx module, but it was loaded. Two different
machines, same XFree86, 4.6.0. Both crashes only happen if X is left running
for over a day or so, then shut down. Once the server closes,
Were the GLX or DRI modules loaded in this case? I still suspect
a DRI or GLX bug, mostly because I haven't seen this with NVIDIA drivers
which don't use the XFree86 dri or glx modules.
Mark.
On Sun, 29 Oct 2006, jayjwa wrote:
Here's the same type crash as was happening
(If you missed it, I posted a few issues back about a strange crash, now I
have more info as to the cause and how to get out of it again.)
Yup, it is definately the glx module. Remove it and everything is OK. It won't
crash right away. I have to have X up for about 20 minutes and then close
On Tue, 17 Oct 2006, Mark Vojkovich wrote:
-Does omitting the glx module help? Perhaps the trace (which
- implies a segfault in __MESA_destroyBuffer unless I'm reading that
- incorrectly) is misleading and it would crash somewhere else if
- that module wasn't loaded. A new trace without the
On Mon, 16 Oct 2006, jayjwa wrote:
On Mon, 16 Oct 2006, Mark Vojkovich wrote:
-It looks like a problem related to OpenGL. My guess is this
- happened when cleaning up resources for an OpenGL app (like the
- screen saver) during shutdown. Does killing the screensaver while
- the server
This just started this morning, but I don't use this machine as much so
prehaps this may be due to a kernel upgrade?
Exiting X results in the screen locking, black, with just the pointer where I
left it. The command line is still usable, but the only way to get the display
back is a full
It looks like a problem related to OpenGL. My guess is this
happened when cleaning up resources for an OpenGL app (like the
screen saver) during shutdown. Does killing the screensaver while
the server is running produce the same problem?
To my knowledge the S3 driver doesn't support
On Mon, 16 Oct 2006, Mark Vojkovich wrote:
-It looks like a problem related to OpenGL. My guess is this
- happened when cleaning up resources for an OpenGL app (like the
- screen saver) during shutdown. Does killing the screensaver while
- the server is running produce the same problem?
hi,
iam trying to start the startx of Xserver, but its giving the following
error,please suggest me to overcome this.
regards,
sivakumar.R.J
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/Dyansys:0
PM
Subject: [XFree86] Xserver error
hi,
iam trying to start the startx of Xserver, but its giving the
following
error,please suggest me to overcome this.
regards,
sivakumar.R.J
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed
or update the
LD_LIBRARY_PATH it will work
Arun
- Original Message -
From: harshavardhanreddy mandeepala
To: xfree86@xfree86.org
Sent: Wednesday, September 20, 2006 6:57 PM
Subject: [XFree86] Xserver deployment to target board
Hi All,
I have Xcompiled Xfree86-4.6 for my
On Thu, 21 Sep 2006, Sivakumar wrote:
hi,
iam trying to start the startx of Xserver, but its giving the following
error,please suggest me to overcome this.
regards,
sivakumar.R.J
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for
On Thu, 21 Sep 2006, Sivakumar wrote:
For your information the below sent mail was for this project only,
we have tried in running XFree86 -configure, which gives a large information i
couldnt able to copy here,hence iam attaching the file info with this
mail.And also i couldnt able to
, September 21, 2006 6:19 PM
Subject: Re: [XFree86] Xserver deployment to target board
hi arun,
For your information the below sent mail was for this project only,
we have tried in running XFree86 -configure, which gives a large information
i
couldnt able to copy here,hence iam attaching the file
Hi All,
I have Xcompiled Xfree86-4.6 for my ARM11 Target.
To my targetboard i have already ported root filesystem and it is working fine.
I used NFS to deploy file system to my target development board.
Now I Kept all my XServer libraries in /usr/X11R6 directory and Include files in corresponding
Hai ,
Just copy the lib files from X11R6 directory to
/lib or update the LD_LIBRARY_PATH it will work
Arun
- Original Message -
From:
harshavardhanreddy mandeepala
To: xfree86@xfree86.org
Sent: Wednesday, September 20, 2006 6:57
PM
Subject: [XFree86] Xserver
hi
I am using linux-2.6.11 (uclibc) kernel with ati
framebuffer driver (RAGE XL).
When i am using Xserver on my normaly it started and
works, but it get crashed when moving windows on it,
and we cannot predict when it crash.At the time of
crash always get the debug message
debug atyfb:
hii everyone..
here, i want some serious help...
i m trying to use XFree86 xserver for
framebufferbut i m unable to find the place from
where it's opening the fb device.i want it to put some
of my codes in order to grab the frames ...,wht i
found from /var/log/XFree86.0.log
is tht it's going
romel dutta wrote:
hii everyone..
here, i want some serious help...
i m trying to use XFree86 xserver for
framebufferbut i m unable to find the place from
where it's opening the fb device.i want it to put some
of my codes in order to grab the frames ...,wht i
found from /var/log/XFree86.0
On Tue, 13 Sep 2005, Umang Saini wrote:
- I am working with 2.4.20-1 kernel - Red Hat 7.3 . I recently migrated to
- 2.6.13-1, but encountered the following problem with XServer crashing at
- start-up.
-
- The entire log file is attached. The final lines of the log are
-
-
- (II) I810(0):
Dear All,
I am using Red Hat Linux 9.0 with glib 3.3 and kernel
2.4.20-8 versions. The XServer crashed when I tried to read the contents of the
/dev/mem file and /proc/kmem file using the cat command inorder to retrieve the
contents of the physical memory.
As suggested in the kernel
Dear All,
I am using Red Hat Linux 9.0 with glib 3.3 and kernel
2.4.20-8 versions. The XServer crashed when I tried to read the contents of the
/dev/mem file and /proc/kmem file using the cat command inorder to retrieve the
contents of the physical memory.
As suggested in the kernel
Hello,
I am working with 2.4.20-1 kernel - Red Hat 7.3 . I recently migrated to
2.6.13-1, but encountered the following problem with XServer crashing at
start-up.
The entire log file is attached. The final lines of the log are
(II) I810(0): Monitor name: COMPAQ S710
(--) I810(0): Chipset: i815
On 9/13/05, Umang Saini [EMAIL PROTECTED] wrote:
(EE) GARTInit: Unable to open /dev/agpgart (No such device)
(EE) I810(0): AGP GART support is not available. Make sure your kernel has
agpgart support or that the agpgart kernel module is loaded.
From looking at the truncated log, I
hi,
I tried to create a bootable cd, it worked and booted to the prompt.
Now i added all the files from /etc/X11 and /usr/X11R6 and created a new
image and created a new cd and it booted, now when i type startx it
gives the error
Fatal server error:
xf86OpenConsole: cannot open virtual
On Linux, XFree86 requires that virtual terminal support be
compiled into your kernel. Perhaps you don't have virtual terminal
support in your kernel?
Mark.
On Thu, 12 May 2005, Viji.R wrote:
hi,
I tried to create a bootable cd, it worked and booted to the
hi
my xserver is crashed due to unknown reasons
my pc configuration is P4 with 256 MB of ram and intel integrated graphics
card,i'm using redhat linux 9
i'm attching the log file please help me
sumit
(II) I810(0): Monitor0: Using hsync range of 30.00-55.00 kHz
(II) I810(0): Monitor0: Using
Hi
From past 2 days, i am facing this problem.. Whenever
i boot my computer, i get the following error
failed to start the display server several times in a
short time period; disabling display :0
I even installed the entire Red Hat package once again
but still the same problem is occuring..
XFree86 Version 4.1.0 (Red Hat Linux release:
4.1.0-3) / X Window System(protocol Version 11, revision 0, vendor release
6510)Release Date: 2 June 2001
OPERATING SYSTEMRED hat linux 7.2 (Enigma)Kernel 2.4.7-10 ( on
an i686 )
The Video Accelerator thatI am using == Intel Corp 82865G
Thanks for the tips - they did eventually lead to the solution:
1. The latest Debian Linux does not appear to supply a generic svga
driver. I tried the vga
driver which ran but the display was so bad as to be unusable.
2. By searching the net for info on the glint driver, I eventually
Do you have the same problem if you simply use a general SVGA driver
for your video card?
Rgds,
jan
-just a simple n00b's guess-
On Thu, 30 Dec 2004 15:56:55 -0500, Larry Watkins
[EMAIL PROTECTED] wrote:
I have a new installation of Debian 3.0 r3 on a Gateway Pentiun II 233
with an
I have a new installation of Debian 3.0 r3 on a Gateway Pentiun II 233
with an
AccelGraphics Permedia II graphics card. The XFree86 version is 4.1.0.1.
I believe I
have the correct driver (glint) but the Xserver will not start. (The
rest of the installation works
fine.) I am attaching the log
hi,
i have been working on this for two days
reading and such
but to no avail
this is on a redhat 8.0 box
reloaded(through an upgrade) the system
without formatting, just trying to over write
i am able to logon to a shell prompt
but not able to start the xserver
can you tell me how to go about
Greetings.
I have upgraded to XFree86 4.4.0 and I've upgraded my
nvidia driver to the latest release, but my X-server still
intermittently hangs in what seems to be a busy loop. As
it has been pointed out to me that this might be a driver bug,
I've sent the following message to [EMAIL PROTECTED]
Hi GuysI was installing SMB protocol (samba)
and a graphical user interface called swat to manage samba, everything was fine
till i shutdown the pc yesterday.Today I was starting my linux (rh9) kernel
2.4.20-8 the I found that it tries to bring up the graphical interface with no
success.
Read the FAQ:
http://xfree86.linuxwiki.org/FAQ
Mark.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Bhargavaquot; lt;[EMAIL PROTECTED]gt;
gt;Reply-To: [EMAIL PROTECTED]
gt;To: lt;[EMAIL PROTECTED]gt;
gt;Subject: [XFree86] Xserver problem
gt;Date: Mon, 11 Oct 2004 15:08:27 +0530
gt;
gt;Hi!
gt;
gt;
gt;
gt;After rebooting the m/c my XSERVER does not come up. Here is the log
gt;file. Could anyone please help.
gt
hi,
I am not able to run xserver in my system (RH9). The
command startx crashes. The log file is attached.
___
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush
XFree86 Version 4.3.0
Title: Mensaje
Hi,
After upgrading to
the last version of XFree86 (XFree86 Version 4.4.0) we are not able to start
anymore the X server. Any help?
Thanks in advance
for your support.
Marius
XFree86.0.log
Description: Binary data
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com
Before reporting problems, check
Hi ya all,
I'm a debian user an' since 4months ago I was waiting for 4.4 version but .deb won't
implement it in the
distro, so which xserver could I use instead of xfree, I,m afraid for my laptop
future!!
help me please.
tnx
--
If a train station is where a train stops. Then what stops at a
Hi,
I have made a little gadget to get the right sync from VGA to SCART in
my TV.
Hello ,
I am trying to see the graphical terminal of an HP-UX form a linux system:
-Linux , name=Dumas , xserver
-Dartanan , name=Dartanan , Xclient
Dumas:
xhost +Dartanan
Dartanan :
export DISPLAY=139.16.240.111:0.0
xdpyinfo
connection to 139.16.240.111:0.0 refused by sever
The port 6000
Hello Debian folks
Installing Debian 3.0r2
I get stuck in xf86config specifying the videoCard.
mainboard ASUS CUSI-FX
SiS 630E AGPset
SiS300 AGP graphics controller
As I read in postings I should choose xserver-sis,
but can't find the right place for doing so.
Both files are present:
Admin wrote:
I have isntalled Redhat 9.0 and whever i give command for startX it show the
follwing attached message. Can u pelase throw some light on what do do next.
(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()
It is not finding any config files (Red Hat Linux
Dear all,
I have isntalled Redhat 9.0 and whever i give command for startX it show the
follwing attached message. Can u pelase throw some light on what do do next.
Regards
Ashish
-Original Message-
From: root [mailto:[EMAIL PROTECTED]
Sent: Friday, February 13, 2004 11:08 AM
To: [EMAIL
HiHaving problem with Xserver.It is unable to start.It just crashed.For your info i'm using Nvidia TNT2.Linux 9.0.Here is acopy of my Xfree86config file and XFree86.0.log.Anyway thanks for your help..
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!# XFree86 4
- Original Message -
From: Maheswaran Ponnusamy [EMAIL PROTECTED]
Date: Thu, 29 Jan 2004 18:15:18 +0800
To:
Subject: [XFree86] (no subject)
hi all,
After successfull installation and working in redhat linux 9, we are
now facing a problem in starting GUI.
It shows, unable to
Hi!
Is there a known bug with the nvidia's binary driver, kernel 2.6 and
xfree 4.3.0? When i use it i experience some hang-ups. But if i use the
xfree driver it works like a charm. Is it a problem with the grphics
board or a software problem?
___
Quoth Ivan O. Volzhev:
I have XFree86 server version 4.3.0 and integrated in I865G graphic
card. My server dying from time to time with message lockup. Log and
config file attached. Thank you for your attention Good luck, Ivan O.
Volzhev mailto:[EMAIL PROTECTED]
search the archives - there
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686
[ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com
Before reporting problems, check
Hi,
my system RedHat 9
video card 3dConnect RADEON 9200
motherboard ABIT IS7-E
xserver not started helpmy please !!
XFree86.0.log
Description: Binary data
My Xserver doesn't start. Hence GUI is not available. However textbased shell is
working fine.
The log generated by Xserver is as follows:
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System:
hi !
i have xserver XFree86 Version 4.3.0 on RH9.0. it was working fine until i
happen to reboot the machine from terminal without exiting from the
xwindow. since then i am not being able to run xwindow. it prompts for
username and password as normal. but when both username and password is
Hi there,
after installing FreeBSD 4.7 on a P4 machine i tried to configure my
GeForce FX 5200 by downloading its driver from the NVIDIA website (and did
as they've specified). After installation of the driver, the startx command
ended by a crash : the output said that a card was found but was
The GeForce FX 5200 wasn't supported until XFree86 4.3, so
xfree86 -configure isn't going to work with versions older than
that.
Mark.
On Mon, 1 Dec 2003, Faissal ABDALLAH wrote:
Hi there,
after installing FreeBSD 4.7 on a P4 machine i tried to configure my
I've got an error with Xserver version. It says that ABI's (whatever
this is) is newer then my Xserver version although I have Xfree86-4.3.0
(and this seems to be the latest Xserver version) on my slack??
Here's the log from Xserver (attached)
I hope you can help..
Thanks in advance
Rafal
Sir , I have installed the Redhat Linux version 9.0 hardly two weeks ago. My problem isthat now I could not start my XServer. For that reason I could not get into the GUI.
As I am not comfortable with the text mode, I request you to suggest a solution to the above problem. The error log is
I've got an error with Xserver version. It says that ABI's (whatever
this is) is newer then my Xserver version although I have Xfree86-4.3.0
(and this seems to be the latest Xserver version) on my slack??
Here's the log from Xserver (attached)
I hope you can help..
Thanks in advance
Rafal
I've got an error with Xserver version. It says that ABI's (whatever
this is) is newer then my Xserver version although I have Xfree86-4.3.0
(and this seems to be the latest Xserver version) on my slack??
Here's the log from Xserver (attached)
I hope you can help..
Thanks in advance
Rafal
Sir ,I have installed the Redhat Linux version 9.0 hardly two weeks ago. My problem is that now I could not start my XServer. For that reason I could not get into the GUI. As I am not comfortable with the text mode, I request you to suggest a solution to the problem.The error log is attached
raf wrote (in a message from Sunday 23)
I've got an error with Xserver version. It says that ABI's (whatever
this is) is newer then my Xserver version although I have Xfree86-4.3.0
(and this seems to be the latest Xserver version) on my slack??
It looks like you grabbed a binary
Quoth Rakesh Raghunathan:
I have installed the Redhat Linux version 9.0 hardly two weeks ago. My
problem is that now I could not start my XServer. For that reason I
could not get into the GUI. As I am not comfortable with the text mode,
I request you to suggest a solution to the problem. The
please help me
i am a member at u r site
i whant to get rid of this bug
i had instaled redhat 8.0 on my pc but i am not
getting
theGNOME
,KDE at the startup or by
usingcommondsi
kindly request u to give solution to this
problem i am sending the log file as attachment so
please
please
dear programmers
(or whatever a little german pupil shouldwite to adress you9
I've got an old machine with an 686 processor with 120 MHz and only 16 MB EDO-RAM.
On a new bought 8 GB harddisk I installed debian 3.0. It's runnning but I cannot start
your xserver. the log.0 file says that the file
XFree86.0.log
Description: Binary data
Motherboard Asus A7S 266 VM - ChipSet Sis 740 e Sis 962L
Processor Amd Duron 1.4
256 MB Ram
Video 08 Mb SIS - 6326
Monitor LG - StudioWorks 500G
S.O.
Red Hat Linux 8.0 - X Server not Run
Conectiva Linux 8.0 - OK
Windows 2000 Professional - OK
--
Diga no a Excluso Digital!!
Mark Vojkovich wrote:
You need to be running XFree86 4.3.0 for that card. 4.1.0
predates that hardware by a couple of years.
Mark.
On Fri, 24 Oct 2003, JORGE CASTRO wrote:
I installed XFree86 version 4.1.0.1 on my Dell Inspirion 5150 laptop,
which has a Nvidia GeForce FX 5200 Go
JORGE CASTRO wrote:
I installed XFree86 version 4.1.0.1 on my Dell Inspirion 5150 laptop,
which has a Nvidia GeForce FX 5200 Go graphics card.
The driver for the Nvidia GeForceFx5600Go, which I guess is similar to
the one above, can be found on the Nvidia web site, you can get also
I installed XFree86 version 4.1.0.1 on my Dell Inspirion 5150 laptop,
which has a Nvidia GeForce FX 5200 Go graphics card.
I can't get the Xserver to work. I get a message saying no screens
detected.
By doing a PCI bus scan, I get the impression that the video
card on PCI:1:0:0 was not detected.
You need to be running XFree86 4.3.0 for that card. 4.1.0
predates that hardware by a couple of years.
Mark.
On Fri, 24 Oct 2003, JORGE CASTRO wrote:
I installed XFree86 version 4.1.0.1 on my Dell Inspirion 5150 laptop,
which has a Nvidia GeForce FX 5200 Go
sir
the error reported is attached herewith. pls suggest a
solution at the earliest.
regards
shibu
__
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
XFree86.0.log
Description: XFree86.0.log
Hello
I use a Debian Sid , and i see that my port 6000 tcp is in LISTEN mode
!! so by default this port is in -nolisten with debian , i check my
xserverrc file is good with good perm, when i kill X and do ./X -dpi 100
-nolisten tcp i have a screen blank with ly mouse which i can move
,so
Quoth James Muo:
I bought and installed a red hat linux 9.0 on an intel P4 2.4GHZ
processor Dell Dimension 2400 series. Memory - 128MB Shared 333MHZ DDR
SDRAM and Graphics - Intel Extreme Graphics (Graphics Chipset - I
think is Intel 845GL)
(II) I810(0): I830CheckAvailableMemory: 95228 kB
Hi there
I start debian today. I can't start Xserver. Please
help me, this is my log file:
Thanks in advance.
This is a pre-release version of XFree86, and is not
supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and
patches submitted
to [EMAIL PROTECTED] Before reporting bugs in
Remove the Option UseFBDev line from the /etc/X11/XF86Config-4
I don't know why Debian uses that for. It only decreases the chances
of the server actually working.
Mark.
On Mon, 29 Sep 2003, Hamid Nouri wrote:
Hi there
I start debian today. I can't start Xserver.
Hi, I´m running XFree 4.3 (Gentoo) and everything worked right till once it
didn´t run any more. I don´t know why whenever I try to startx it fails, if
I try to run gdm it says gdm: error while loading shared libraries:
libgtk-x11-2.0.so.0: cannot open shared object file: No such file or
Sir,
i have problem with X server, i am attaching the log
files, please help us to solve this problem
expecting a reply.
thanking you
manu
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Hi,
My X-Server has been crashing periodically since *at least* the end of
May. This usually happens when trying to load a web page in
Mozilla. My current crash is VERY repeatable, and I have attached the
current server log. I am using Linux 2.4.22 and its associated mga DRI
module. I was using
On Tue, 26 Aug 2003, Chris Rankin wrote:
Hi,
My X-Server has been crashing periodically since *at least* the end of
May. This usually happens when trying to load a web page in
Mozilla. My current crash is VERY repeatable, and I have attached the
current server log.
This is probably a
Hi folks,
got some worries with starting the X-Server and hope one of you would like
to help.
Attached you find XF86Config and Xfree86.0.log. I tried to run the Font
Server as well as giving explicite fonts path however both ends up with:
Fatal Server Error: Cannot find default font fixed
Hi folks,
got some worries with starting the X-Server and hope one of you would like
to help.
Attached you find XF86Config and Xfree86.0.log. I tried to run the Font
Server as well as giving explicite fonts path however both ends up with:
Fatal Server Error: Cannot find default font fixed
Hello:
I am up-grading a workstation from Red Hat Linux 7.1 to Red Hat Linux 9,
but I could not succeed in installing the X server. The video card is
GeForce2 GTS and the monitor is Dell M781.Please find enclosed the log
file, and the config file as well.
I appreciate your help.
Juan Padilla
On Friday, July 11, 2003 12:43 pm, Juan Padilla Noriega wrote:
Hello:
I am up-grading a workstation from Red Hat Linux 7.1 to Red Hat Linux 9,
but I could not succeed in installing the X server. The video card is
GeForce2 GTS and the monitor is Dell M781.Please find enclosed the log
file,
hello everybody
i am unable to start xserver.
i have redahat 9.0 installed in my pc.
i tried the commands xconfigurator and redhat-config-xfree86 but
the
system does not recognise these commands.
startx at command line also doesnt help.
please suggest the solution.
thank u
vrinda
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Five minutes ago my XServer suddently crashed with a signal 11, I have no
idea what caused it to do so, and I can't find anything in the log file that
helps me.
I'm using SlackWare 9.1 with Linux kernel 2.4.21-pre5, and I'm using the
If you were running a web browser at the time, it's probably
a freetype problem. You could try using the xtt module instead
of freetype.
Mark.
On Tue, 8 Jul 2003, Simon Ejsing wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Five minutes ago my
On Tue, Jun 24, 2003 at 01:22:26PM +0100, Andy Myers wrote:
X server wont start says:
could not init font path element unix/:7100, removing from list!
fatal server error:
could not open default font 'fixed'
On Tuesday, June 24, 2003 8:24 am, Daniel Godas Lopez wrote:
im am almost a
Mr fir kes writes:
plz help me my xserver doesn't open ...
my system config is as follows
nvidia riva tnt model 64 / model 64 pro
genius netscroll + ps/2 mouse
acer ac711 17 monitor
the log is attached
You are trying to run a SiS chipset:
(--) PCI:*(1:0:0) SiS 300 rev
X server wont start says:
could not init font path element unix/:7100,
removing from list!
fatal server error:
could not open default font 'fixed'
there is more but this is exacly what happended
before to me and i had to reinstall, i really dont want to have to do that
again! why is it
:[EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 8:22 AM
To: xfree86
Subject: [XFree86] XSERVER CRASH - newbie needs help!
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
im am almost a newbie too but it seems you deleted one of the fonts, if
its that the only thing you have to do is find it (search for it on
google) and put it in the directory it was before, if it isnt that i
have no idea what happened :s
On Tue, Jun 24, 2003 at 01:22:26PM +0100, Andy Myers
thanks that worked:)
cool andy
- Original Message -
From: Cynthia Grossen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 2:17 PM
Subject: RE: [XFree86] XSERVER CRASH - newbie needs help!
Your font server has failed.
Here is a link to Red Hat documentation
On Mon, 23 Jun 2003, Bob Wells wrote:
I am installing RetHat linux 9.0 on an ibm thinkpad a22p with an ati rage
128 mobility video card in it. After the install is complete and upon
reboot, when the root userid is logged on xserver crashes. I have
included the log and the config file in the
Title: xserver
I am installing RetHat linux 9.0 on an ibm thinkpad a22p with an ati rage 128 mobility video card in it. After the install is complete and upon reboot, when the root userid is logged on xserver crashes. I have included the log and the config file in the hopes that maybe there
my system configuration is as follows :
intel pentium 4 1.7 Ghz
256 mb ram
nvidia riva tnt model 64 / model 64 pro
acer ac711 17 " monitor
genius netscroll + ps/2 mouse
plz help me ... my xserver crashes
the full bug report is attached
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per
I think the best way for you is finding out and setuping the nvidia driver from the
www.nvidia.com.
wish it can help you. 8-)
Tom
-ì©l?¥ó-
?¥ó¤H: firoz [mailto:[EMAIL PROTECTED]
?°e??: 2003¦~6¤ë23¤é 11:15
¦¬¥ó¤H: [EMAIL PROTECTED]
¥D?: [XFree86] xserver crashes
my system
1 - 100 of 125 matches
Mail list logo