I've create config with X -configure,
but it doesn't work.
The config and error log are
applied
XF86Config.new
Description: Binary data
XFree86.0.log
Description: Binary data
On Thu, 13 Mar 2003, Philippe Moutarlier wrote:
I have 2 cards : ATI 8500 DV AGP and ATI 7500 PCI running RH 8.0 and Xfree
from the HEAD as of today.
- if I try to run the PCI card only with DRI loaded (glx+dri), the box gets
totally locked up and needs a hard reset.
In this last case,
my email ad is [EMAIL PROTECTED]Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
On Fri, 14 Mar 2003, Branko Tanovic wrote:
I am running an remote client stations (LTSP)
I do not use SWAP on this station pecose there are
netboots and i have to use NFS_SWAP from the server.
Whats is the problem anyway
On netboot clients I have only 32MB of ram and what
happens is that
On Fre, 2003-03-14 at 04:38, Philippe Moutarlier wrote:
I have 2 cards : ATI 8500 DV AGP and ATI 7500 PCI running RH 8.0 and Xfree
from the HEAD as of today.
Still trying to solve my dual head/dual card problem, I run into two problems
:
- if I try 2 cards simultaneously , the server
On Thu, 13 Mar 2003, Mark Vojkovich wrote:
I've seen a couple of these reports now, where 4.3 reports
Truncating PCI BIOS Length with multihead configurations and
doesn't work. I just tried two nv cards with 4.3 under Linux
and it worked fine. Perhaps this is specific to FreeBSD? Is
Hi,
I've got a slight problem with getting X to work with my setup. I have a
Matrox Millenium G450 with 32mb memory and a Iiyama Vision Master Pro 451. I've
used both RedHat 8.0 and Mandrake 9.0 and both give the same results. Basically
the setup can't do 1280x1024. It just squeaks and flashes.
Hi!
Daniel Stone wrote, quoting me (Sun 2003-Mar-09 09:58:41 +1100):
like this is an upstream problem. I'm forwarding this to
[EMAIL PROTECTED], the main XFree86 project mailing list, to see if I
can get a reply there.
To me, the problem looks not that much APM related anymore, but
I'm not
Hello.
I have a problem with XFree86 4.3.0.
I instaled it, run XFree86 -configure. Run startx, after i have black window. Send to
you my log file.
Thank you.
XFree86.0.log
Description: Binary data
Regarding: 4.3.0 does not build GART support on OpenBSD
Email: [EMAIL PROTECTED]
XFree86 Version: 4.3.0
OS: OpenBSD 3.2
Area: Xserver
Server: XFree86 (The XFree86 4.x server)
Video Card:
i845
Description:
The i845 driver almost
Dear Sir/Madam,
Dear Sir/Madam,
My name is Sudi Dada from equatorial guinea, I am 21 years of
age.my pareents died during his way to guinea ,before the
death of my parents,he was a succesfull business man who is
into the sales of bronze casting and diamond abroad.the sum of
10.8 million was
To Whom
Among other cards that XFree86 version 4.3.0 pruports to support (and
which are subsequently listed once the version is installed) the SiS300
video chip is mentioned.
Tho the installation of this version (on RH7.3) of XFree is not without
error on my machine (apparently libglide2x.so is
On Fri, 2003-03-14 at 12:31, Mark Vojkovich wrote:
Could someone put the FreeBSD int10 module from 4.3 someplace where I
can get it? I'll give it a try.
I put one from my system up at:
http://people.freebsd.org/~anholt/X/files/libint10.a
--
Eric Anholt
If I am reading the filename correctly, that file is 26Mb -- but if that
is OK to
send to you, will do...in the meantime, I put it in
ftp.evl.uic.edu/pub/INcoming/mgolter/xfree/
btw, ver 4.3.0 has libglide3.so but not the 2x.so nec to configure the
system correctly. I am supposing I can find the
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
To Whom! ;)
Ijust installed Xfree86 version 4.3.0 on a system with RH7.3 and a video
card with a SiS300 chipset (SiS301 onboard for dual monitors) (installed
ver 4.3 cuz the native Xfree86 did not support the SiS300, and this
version did list support).
Upon install, the message was: no
[ cc on replies please ]
I've got a Shuttle Micro-ATX nForce2 based system running
OpenBSD, and am trying to get the dual-head capabilities of
the built-in GeForce4 MX 400 working.
The 'nv' driver doesnt seem to support Xinerama ... is there
any way to get the second VGA output to work with the
Hi,
OS: FreeBSD 5.0-RELEASE.
Recently upgraded to XFree86 4.3.0 from FreeBSD ports tree. X server fails
to start. Previous version (4.2.x) works perfectly. Symptoms:-
1. Default xf86cfg-generated XF86Config (UseBIOS on): X hangs with blank
screen, VTY also fails, had to connect remotely and kill
On Fri, 14 Mar 2003, Giraldo Alonso Suarez wrote:
Date: Fri, 14 Mar 2003 16:18:05 -0500
From: Giraldo Alonso Suarez [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Content-Type: text/plain;
charset=us-ascii
Subject: unsuscribe please
I'm never quite sure what is more
At last, I got my dual head working : but NOT with the ATI 7500 PCI.
It worked right out of the box with an nVidia PCI, though. What's wrong with
the radeon dirver and 2 ATI cards ??
Anyway, now I cannot get DRI on my Primary card with xinerama.
Was not DRI supposed to work on the Primary Card
The linux and XFree4 install was so I can run some 3D applications...but I
did not know that glide was so specifically aimed...the Real problem was
that I couldn't get the X server configured at all. Right now I am
stuck with 16 bit color...(using generic VESA in Xconfigurator, which is
not as
On Sam, 2003-03-15 at 03:06, Philippe Moutarlier wrote:
At last, I got my dual head working : but NOT with the ATI 7500 PCI.
It worked right out of the box with an nVidia PCI, though. What's wrong with
the radeon dirver and 2 ATI cards ??
It's called a bug. :\
Anyway, now I cannot get DRI
there are Linux drivers for the high-end nv cards (the ones that support 2
screens (dual-head capabilities -GeForce4 Ti on up) but dunno if that
helps you...but I am having a terrible time finding support for dual head
capabilities on less expensive, lower end cards from any supplier --
please
On Fri, 14 Mar 2003, Mark Vojkovich wrote:
On 14 Mar 2003, Eric Anholt wrote:
On Fri, 2003-03-14 at 12:31, Mark Vojkovich wrote:
Could someone put the FreeBSD int10 module from 4.3 someplace where I
can get it? I'll give it a try.
You already have it. (Or should.) The two int10
Hi,
OK. I'm officially clueless for setting up my
dual-head ATI RADEON 9000 in a Slack box. I'm running
XFree 4.3.0. I have tried almost anything (and I know
the radeon man page by heart)
Could somebody who has that setup working send me or
post the relevant sections of their XF86Config?
On Fri, 14 Mar 2003, Marc Aurele La France wrote:
On Fri, 14 Mar 2003, Mark Vojkovich wrote:
On 14 Mar 2003, Eric Anholt wrote:
On Fri, 2003-03-14 at 12:31, Mark Vojkovich wrote:
Could someone put the FreeBSD int10 module from 4.3 someplace where I
can get it? I'll give it a
On 14 Mar 2003, Z wrote:
Date: 14 Mar 2003 19:33:41 -0800
From: Z [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Content-Type: text/plain
Subject: Re: Radeon 9700 and XFree86 4.3.0: no DVI output
On Fri, 2003-03-14 at 04:41, William Gallafent wrote:
Not rough at all for
Regarding: XFree86 4.3.0 Mouse stops responding after using KVM switch
Email: [EMAIL PROTECTED]
XFree86 Version: XFree86 Version 4.3.0
OS: Linux 2.4.20 i686 [Elf]
Area: Xserver
Server: XFree86 (The XFree86 4.x server)
Video Card:
X
On Sam, 2003-03-15 at 03:06, Philippe Moutarlier wrote:
At last, I got my dual head working : but NOT with the ATI 7500 PCI.
It worked right out of the box with an nVidia PCI, though. What's wrong
with
the radeon dirver and 2 ATI cards ??
It's called a bug. :\
Indeed, I've fixed this on
Date: Thu, 13 Mar 2003 14:53:10 -0700 (MST)
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Build failure on RedHat 6.2 - setjmp again
On Thu, 13 Mar 2003, Dr Andrew C Aitchison wrote:
The setjmp changes on 2003/03/12 break build on Red Hat 6.2.
It built fine the day
On 13 Mar 2003, Miguel Freitas wrote:
May someone with cvs access check and commit this patch?
(patch for XFree86 4.3.0)
It fixes:
- memory leaks at ProcXF86VidModeModModeLine and
ProcXF86VidModeValidateModeLine
- uninitialized fields of mode structure at ProcXF86VidModeAddModeLine,
Please don't apply.
IT It seems xc/programs/luit/sys.c in XFree86 4.3.0 contains a off-by-one
IT bug. A patch (sys.c.patch) to fix this is attached.
This is correct. Thanks, I've forwarded it to the patchers.
IT - Make luit use openpty to search an unused pty. Without this patch,
IT luit
IT intro(2) manpage on Solaris, which said:
IT | effective user ID and effective group ID prior to an exec of
Interesting. Which version of Solaris are you using?
I think it must be a documentation bug; it appears to be fixed under
5.8. Check also the execve(2) page.
From: Juliusz Chroboczek [EMAIL PROTECTED]
Subject: Re: Some patches to luit
Date: 15 Mar 2003 00:01:51 +0100
IT intro(2) manpage on Solaris, which said:
IT | effective user ID and effective group ID prior to an exec of
Interesting. Which version of Solaris are you using?
I think
I am trying to add multi-monitor support to Wacom driver, an input device
driver in X kernel. Is there a call to get a screen's origin X and Y from
device driver (not from the user space. I know how to do this)?
Thanks,
Ping
___
Devel mailing list
On 13 Mar 2003, Ben Guthro wrote:
Xinerama aside, even in a dual head system running without Xinerama, I
am having a difficult time retrieving the XFree86_DDC_EDID1_RAWDATA for
the second (non-primary) screen
xlsatoms |grep EDID
yields
69XFree86_DDC_EDID1_RAWDATA
209
37 matches
Mail list logo
