Re: [gentoo-user] Midi problems...Oxygene 61 keyboard and neighbours]

cinder [15-12-13 05:48]: > Seq24 is a cranky beast. I can only use it with the options "Jack > Transport", "Transport Master, and "Master Conditional" enabled in "Jack > Sync" tab of seq24 options. You need your patterns activated and routed > to the

Re: [gentoo-user] Midi problems...Oxygene 61 keyboard and neighbours]

cinder [15-12-13 04:28]: > Hi Meino, I have a2jmidid start automaticaly in qjackctl. It's been a > while since my midi played up, but I remember having issues like yours. > > Meino wrote: > >I played around with a2j, but it give me no changes. > > What did yo

[gentoo-user] Re: Blocked packages emerging xfce4-meta

Sorry Joost, but when I redirct the output of emerge to a file with > Code: # emerge -va --update --deep world > emerge-va-update-deep-world ... only two lines are written Code: These are the packages that would be merged, in order: Calculating dependencies ... done! I tried putting this l

Re: [gentoo-user] Midi problems...Oxygene 61 keyboard and neighbours]

pt after startup" enable, and the line: /usr/bin/a2jmidid -e & .. and "Execute script on Shutdow" enabled, and the line: killall -s TERM a2jmidid cinder - ONLY AT VFEmail! - Use our Metadata Mitigator to keep your email out

Re: [gentoo-user] Midi problems...Oxygene 61 keyboard and neighbours]

hing in "Midi Clock" tab set to "On(Pos)". I have an expandable seq24 entry in my Qjackctl Alsa midi tab and a expandable a2j entry in jack midi tab containing the same seq24 bus's. Seq24 seems to only operately in any way reliably when it&

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

On Friday 04 September 2009 15:09:08 Cinder Cinder wrote: >Sorry Joost, but when I redirct the output of emerge to a file with > > > Code: > # emerge -va --update --deep world > emerge-va-update-deep-world > > ... only two lines are written > > Code: > The

Re: [gentoo-user] Midi problems...Oxygene 61 keyboard and neighbours]

cinder [15-12-13 04:28]: > Hi Meino, I have a2jmidid start automaticaly in qjackctl. It's been a > while since my midi played up, but I remember having issues like yours. > > Meino wrote: > >I played around with a2j, but it give me no changes. > > What did yo

Re: [gentoo-user] device eth0 does not exist

On 30 Sep 2009, at 08:56, Neil Bothwick wrote: On Wed, 30 Sep 2009 00:04:54 -0700, Cinder wrote: I was revdep-rebuilding emerging -udN system and world 'cause my network interface was now coming up as eth1. /etc/udev/rules.d/70-persistent-net.rules http://pastebin.com/m36620252 D

Re: [gentoo-user] gentoo-user@lists.gentoo.org

clients to connect to your Gmail account". I thought there might be a way. But seems kinda unfreindly. Maybe I'll have to that if I can't get rid the add stuck on the end of my mail. Thanks cinder - ONLY AT VFEmail! - Use our M

[gentoo-user] Re: gentoo as openstack compute node?

sr/portage/sys-cluster/openstack-meta/ openstack-meta-2014.1..ebuild I see: EAPI=5 DESCRIPTION="A openstack meta-package for installing the various openstack pieces" HOMEPAGE="https://openstack.org"; LICENSE="Apache-2.0" SLOT="0" KEYWORDS="

Re: [gentoo-user] rc.log errors

>Does OP have /var on / or is it a separate mount point? /var is on / _ Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com Join Linux Discussions! --> http://Community.LinuxWaves.com

[gentoo-user] CPU frequency scaling Macbook Pro

0.748213] ACPI: acpi_idle registered with cpuidl # lscpu |grep name: Model name:Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz # lspci |grep Host: 00:00.0 Host bridge: NVIDIA Corporation MCP89 HOST Bridge (rev a1) Any insight would be greatly appreciated. Thank yo

[gentoo-user] Re: device eth0 does not exist-

I recompiled my kernel again with built-in e1000e support. No good. Maybe it's udev? _ Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com Join Linux Discussions! --> http://Community.LinuxWaves.com

[gentoo-user] Re: device eth0 does not exist

On 10/01/2009 01:49 AM, Cinder wrote: Can you show the results of `modprobe -v e1000` please? Code: # modprobe -v e1000 FATAL: Module e1000 not found. Try running 'depmod'.

Re: [gentoo-user] Gentoo is the best linux distro

>http://mark.orbum.net/2011/11/15/the-pan-pipes-of-gentoo-linux-always-at-the-source/ Woow! ... that's ... it's ... I ... I'm weeping ... freely! I'm not alone. _ Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com Joi

Re: [gentoo-user]

On Friday 04 September 2009 13:47:51 Cinder Cinder wrote: > Wow! I made it! I'm in! Just installed my first Gentoo (Phew!). Its cool! > I'm up to part 2 of the Gentoo Linux x86 Handbook "Working With Gentoo" and > I've managed to install a few things, namely vim

Re: [gentoo-user] update broke X

On Wed, 16 Jan 2013 22:18:44 -0800, Cinder wrote: > VIDEO_CARDS="nouveau v4l" Add vesa to this. It won't fix the nouveau problem but it will give you a fallback when it fails. -- Neil Bothwick Evolution stops when stupidity is no longer fatal! signature.asc Description: PGP signature

Re: [gentoo-user] gentoo-user@lists.gentoo.org

151207 cinder wrote: > Gmail says my client Mutt is a security risk and can no longer connect w it. Mutt should not be a security risk ! You may need to configure some encryption to use Gmail. -- ,, SUPP

[gentoo-user] media-gfx/blender-2.71 dependencies

ted. Kind regards cinder

[gentoo-user] rc.log errors

Hello, my rc.log is full of lines like: /etc/rc.conf: line 35: /var/log/rc.log: No such file or directory ... and: /etc/rc.conf: line 35: /var/log/rc.log: Permission denied I have these lines in /etc/rc.conf: rc_logger="YES" rc_log_path="/var/log/rc.log" Does anybody know what this means? ___

Re: [gentoo-user]

J. Roeleveld wrote: > On Friday 04 September 2009 13:47:51 Cinder Cinder wrote: > >> Wow! I made it! I'm in! Just installed my first Gentoo (Phew!). Its cool! >> I'm up to part 2 of the Gentoo Linux x86 Handbook "Working With Gentoo" and >> I&#x

Re: [gentoo-user] update broke X

I would try the standard nvidia driver next. On Thu, Jan 17, 2013 at 4:32 AM, Neil Bothwick wrote: > On Wed, 16 Jan 2013 22:18:44 -0800, Cinder wrote: > > > VIDEO_CARDS="nouveau v4l" > > Add vesa to this. It won't fix the nouveau problem but it will gi

[gentoo-user] Re: Blocked packages emerging xfce4-meta

I'm sorry! Please forgive me. I don't why these messages are comming up blank. Just to recap. I've installed Gentoo for the first time. Emerged vim, links, and xorg-server. Trying to emerge xfce4-meta... Code: # emerge -pv --update --deep world output > http://pastebin.com/m5ef78564 Thank you a

Re: [gentoo-user] device eth0 does not exist

On Wed, 30 Sep 2009 00:04:54 -0700, Cinder wrote: > I was revdep-rebuilding emerging -udN system and world 'cause my > network interface was now coming up as eth1. > /etc/udev/rules.d/70-persistent-net.rules http://pastebin.com/m36620252 Delete this file and it will revert to et

[gentoo-user] Re: Re: Blocked packages emerging xfce4-meta

O.K.! I'm on the move! My Gentoo is updating deeply now \o/. I had tried unmerging man-pages-3, but I must have mistyped. Maybe it was the that <. Wow! Look at it Go! Thank you so much. I am overflowing with eternal gratitude. P.S. I wonder why my mail show's up blank when I reply.

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

On Fri, Sep 04, 2009 at 10:53:00PM -0700, Penguin Lover Cinder Cinder squawked: > [ebuild U ] sys-apps/man-1.6f-r3 [1.6e-r3] USE="nls -lzma%" 249 kB > [ebuild N] sys-apps/man-pages-posix-2003a 949 kB > [ebuild U ] sys-apps/man-pages-3.21 [2.76] USE="nls&qu

[gentoo-user] Re: device eth0 does not exist

Thanks again. I was using the e1000 both compiled-in and as a module with previous posts. I just tried the e1000e out of desperation, but I haven't tried it as a module. I don't feel that it's the kernel driver but rather the correct ethernet inter-face is not being created. I'm reading about

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

On Sat, Sep 5, 2009 at 10:31, Cinder wrote: > I'm sorry! Please forgive me. I don't why these messages are comming up blank. > Just to recap. I've installed Gentoo for the first time. Emerged vim, links, > and xorg-server. > Trying to emerge xfce4-meta... > > Cod

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

Cinder wrote: I'm sorry! Please forgive me. I don't why these messages are comming up blank. Just to recap. I've installed Gentoo for the first time. Emerged vim, links, and xorg-server. Trying to emerge xfce4-meta... Code: # emerge -pv --update --deep world output > h

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

On Sat, Sep 05, 2009 at 01:31:21AM -0700, Penguin Lover Cinder squawked: > I'm sorry! Please forgive me. I don't why these messages are comming up > blank. I've been getting your messages just fine. Are you sure the problem isn't on the receiving end over there? Best

Re: [gentoo-user] update broke X

Cinder wrote: > [ 638.685] (EE) Please also check the log file at "/var/log/Xorg.0.log" for > additional information. > [ 638.685] (EE) You may want to post that log too. The one listed above in the error. It looks like it is not finding your card. Makes me think it

Re: [gentoo-user] update broke X

On 01/17/2013 07:47 MA, Canek Peláez Valdés wrote: > On Thu, Jan 17, 2013 at 12:18 AM, Cinder wrote: >> Thank you Canek. I have always used nouveau driver. > > [ huge snip again ] > > Everything looks OK. You have the kernel configured to use nouveau, > and you have

[gentoo-user] Re: gentoo-user@lists.gentoo.org

On Mon, 7 Dec 2015 11:40:43 -0500 Philip Webb wrote: > 151207 cinder wrote: > > Gmail says my client Mutt is a security risk and can no longer > > connect w it. > > Mutt should not be a security risk ! > You may need to configure some encryption to use Gmail. Gmail

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

e the requirements > for merging media-gfx/blender-2.71 > > emerge -pvf media-gfx/blender > http://bpaste.net/show/447617/ > > The reqired ebuilds seem to be in portage, but emerge says the're not > available. Any insight would be grearly apreciated. > > Kind r

[gentoo-user] Re: device eth0 does not exist

>What is the NIC in the box where eth0 isn't showing up? Intel Corporation 82547EI Gigabit Ethernet Controller >Is the driver in your kernel? No. It's a module (e1000) and I watched it compile. I tried a static driver as well. lspci say's http://pastebin.com/md3578a6 I deleted etc/udev/rules.d/7

[gentoo-user] [SOLVED] Re: device eth0 does not exist

Thanks for all the input. I have the network up again. I'm not exactly sure how. I've compiled the e1000 in the kernel. The only thing I've changed is this kernel option ... Device Drivers --> Network Device Support --> Ethernet 10 0r 100Mbit --> EISA,VLB, PCI and onboard cont

[gentoo-user] Re: Re: device eth0 does not exist

>Can you show the results of `modprobe -v e1000` please? Code: # modprobe -v e1000 FATAL: Module e1000 not found. ... but ... Code: # find /lib/modules/2.6.30-gentoo-r6/ -type f -iname '*.o' -or -iname '*.ko' | grep e1000 /lib/modules/2.6.30-gentoo-r6/kernel/drivers/net/e1000/e1000.ko Nothing

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

ilds seem to be in portage, but emerge says the're not > > available. Any insight would be grearly apreciated. > > > > Kind regards cinder > > > > Whoops! Sorry. Here it is: emerge -pvq =media-gfx/blender-2.71 2>&1 http://bpaste.net/show/447758/

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

ilds seem to be in portage, but emerge says the're not > > available. Any insight would be grearly apreciated. > > > > Kind regards cinder > > > > Whoops! Sorry, try this emerge -pvq =media-gfx/blender-2.71 2>&1 http://bpaste.net/show/447969/

Re: [gentoo-user] Re: device eth0 does not exist

Cinder schrieb: What is the NIC in the box where eth0 isn't showing up? Intel Corporation 82547EI Gigabit Ethernet Controller Is the driver in your kernel? No. It's a module (e1000) and I watched it compile. I tried a static driver as well. lspci say's http://pastebin.

[gentoo-user] Re: device eth0 does not exist-

On 10/02/2009 04:20 AM, Cinder wrote: I recompiled my kernel again with built-in e1000e support. No good. Maybe it's udev? Oops, by grepping through the kernel sources I see that you need the e1000 driver, not e1000e. From your pastebin lspci: Intel Corporation 82547EI Gigabit Eth

Re: [gentoo-user] update broke X

On Thu, Jan 17, 2013 at 12:18 AM, Cinder wrote: > Thank you Canek. I have always used nouveau driver. [ huge snip again ] Everything looks OK. You have the kernel configured to use nouveau, and you have the X.org driver and the correct VIDEO_CARDS setting in /etc/portage/make.conf; I do

Re: [gentoo-user] gentoo-user@lists.gentoo.org

On Sun, Dec 06, 2015 at 02:07:04PM -0600, Dale wrote: > Julio Garcia Merlano wrote: > > unsubscribe now > > . > > > > You may want to try this instead: > > List-Unsubscribe:

[gentoo-user] Re: device eth0 does not exist

Thanks. Depmod yielded no results. At least as far as I can tell. I tried with ... Code: # depmod -a ; depmod -e -F As I recall "Note: the kernel developers warn that you should not configure or compile your kernel as root." >->http://forums.gentoo.org/viewtopic-t-539024.html And that "that

Re: [gentoo-user] rc.log errors

Mine are the same: ls -l /var/log -rw-r--r-- 1 root root627358 Aug 28 09:02 rc.log --- gottl...@nyu.edu wrote: From: Allan Gottlieb To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] rc.log errors Date: Mon, 27 Aug 2012 22:15:32 -0400 On Mon, Aug 27 2012, cin...@lin

Re: [gentoo-user] [SOLVED]/dev/snd/seq access mode and permission

quot; /lib/udev/rules.d/60-persistent-alsa.rules:ENV{ID_SERIAL}=="?*", ENV{ID_IFACE}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}" /lib/udev/rules.d/60-persistent-alsa.rules:ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}" moriah ~ # Bil

Re: [gentoo-user] Re: device eth0 does not exist

On Fri, Oct 2, 2009 at 2:40 AM, Cinder wrote: > Thanks. Depmod yielded no results. At least as far as I can tell. I tried > with ... > > Code: > # depmod -a ; depmod -e -F > > As I recall "Note: the kernel developers warn that you should not > configure o

Re: [gentoo-user] Re: device eth0 does not exist

On Sat, Oct 3, 2009 at 3:15 AM, Cinder wrote: > Thanks again. I was using the e1000 both compiled-in and as a module with > previous posts. I just tried the e1000e out of desperation, but I haven't > tried it as a module. I don't feel that it's the kernel driver

Re: [gentoo-user] Re: device eth0 does not exist

On 30 Sep 2009, at 11:58, Cinder wrote: What is the NIC in the box where eth0 isn't showing up? Intel Corporation 82547EI Gigabit Ethernet Controller Is the driver in your kernel? No. It's a module (e1000) and I watched it compile. I tried a static driver as well. lspci

Re: [gentoo-user] update broke X

On Wed, Jan 16, 2013 at 9:16 PM, Cinder wrote: > Thank you Canek. No luck. Without an xorg.conf my /var/log/Xorg.o.log looks > like this: [ huge snip ] > [ 8532.166] (II) [drm] nouveau interface version: 1.0.0 > [ 8532.166] (EE) No devices detected. Nouveau complains about not

Re: [gentoo-user] /dev/snd/seq access mode and permission

+0200 schrieb Marc Joliet : > Am Fri, 17 Aug 2012 01:54:34 -0700 > schrieb Cinder : > > > Hi, how do I make changes to permissions and access mode of device nodes > > persistent? At the moment I have to chown and chmod the /dev/snd/seq node > > every boot to make

Re: [gentoo-user] gentoo-user@lists.gentoo.org

On 08/12/2015 18:29, cinder wrote: > Woops! Sorry, I miss read the post. It had nothing to with me. I'm not > used to reading mail in a terminal:) I'll have to figure out how to get > rid of the advetisingr, or maybe thats the deal with a free account:( > > Philip Webb

Re: [gentoo-user] gentoo-user@lists.gentoo.org

On Monday 07 Dec 2015 16:40:43 Philip Webb wrote: > 151207 cinder wrote: > > Gmail says my client Mutt is a security risk and can no longer connect w > > it. > > Mutt should not be a security risk ! > You may need to configure some encryption to use Gmail. Gmail has intr

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

ttps://wiki.gentoo.org/wiki/Troubleshooting#Collecting_Additional_Information thats why I installed it. I'm all ears. Thank you. Cinder

Re: [gentoo-user][SOLVED]emerge dev-python/python-dateutil-2.1 failed (compile phase)

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 14.08.2012 09:55, Cinder wrote: >>>>> Unpacking source... Unpacking python-dateutil-2.1.tar.gz to >>>>> /var/tmp/portage/dev-python/python-dateutil-2.1/work Source >>>>> unpacked in >>>&

[gentoo-user] /dev/snd/seq access mode and permission

Hi, how do I make changes to permissions and access mode of device nodes persistent? At the moment I have to chown and chmod the /dev/snd/seq node every boot to make it accessible to my user. the other nodes are fine. Here's the output of ls -l /dev/snd/ total 0 drwxr-xr-x 2 root root 60

Re: [gentoo-user] /dev/snd/seq access mode and permission

nv{ID_BUS}-$env{ID_SERIAL}-$env{ID_IFACE}" /lib/udev/rules.d/60-persistent-alsa.rules:ENV{ID_SERIAL}=="?*", ENV{ID_IFACE}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}" /lib/udev/rules.d/60-persistent-alsa.rules:ENV{ID_PATH}=="?*", SYMLINK+=

Re: [gentoo-user][SOLVED]emerge dev-python/python-dateutil-2.1 failed (compile phase)

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 14.08.2012 10:13, Hinnerk van Bruinehsen wrote: > On 14.08.2012 09:55, Cinder wrote: >>>>>> Unpacking source... Unpacking python-dateutil-2.1.tar.gz >>>>>> to /var/tmp/portage/dev-python/python-date

Re: [gentoo-user] /dev/snd/seq access mode and permission

On Fri, 17 Aug 2012 01:54:34 -0700 Cinder wrote: > Hi, how do I make changes to permissions and access mode of device > nodes persistent? At the moment I have to chown and chmod > the /dev/snd/seq node every boot to make it accessible to my user. > the other nodes are fine. Here

Re: [gentoo-user] /dev/snd/seq access mode and permission

On Fri, Aug 17, 2012 at 3:54 AM, Cinder wrote: > Hi, how do I make changes to permissions and access mode of device nodes > persistent? At the moment I have to chown and chmod the /dev/snd/seq node > every boot to make it accessible to my user. the other nodes are fine. Here's &

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

help, it's best to come prepared. Someone volunteering their time doesn't want to waste that time fumbling about. That's where wgetpaste comes in handy. Make sure you have merged app-text/wgetpaste, and then you're ready to be helped." https://wiki.gentoo.org/wiki/Troubleshooting#Collecting_Additional_Information I am listening Cinder

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

;m not sure how to resolve the requirements > >>> for merging media-gfx/blender-2.71 > >>> > >>> emerge -pvf media-gfx/blender > >>> http://bpaste.net/show/447617/ > >>> > >>> The reqired ebuilds seem to be in portage, but emerge s

[gentoo-user] device eth0 does not exist

Hello, and thancks for the help. I really dig Gentoo. I've installed my first Gentoo, but now I'm stuck. I started on an old PIII to try things out. Got the networking, ATI happening with xfce4 (had to unmasked a few things)and quickly dicided I would rather do this on the fastest machine I

Re: [gentoo-user] /dev/snd/seq access mode and permission

Am Fri, 17 Aug 2012 01:54:34 -0700 schrieb Cinder : > Hi, how do I make changes to permissions and access mode of device nodes > persistent? At the moment I have to chown and chmod the /dev/snd/seq node > every boot to make it accessible to my user. the other nodes are fine. Here

Re: [gentoo-user] device eth0 does not exist

First: What is the NIC in the box where eth0 isn't showing up Second: Is the driver in your kernel? If not, pastebin lspci Cheers Kad On Wed, Sep 30, 2009 at 12:04 AM, Cinder wrote: > Hello, and thancks for the help. I really dig Gentoo. > > I've installed my first

Re: [gentoo-user] /dev/snd/seq access mode and permission

Am Fri, 17 Aug 2012 11:40:47 +0200 schrieb Marc Joliet : > Am Fri, 17 Aug 2012 01:54:34 -0700 > schrieb Cinder : > > > Hi, how do I make changes to permissions and access mode of device nodes > > persistent? At the moment I have to chown and chmod the /dev/snd/seq node &

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

media-gfx/blender >>> http://bpaste.net/show/447617/ >>> >>> The reqired ebuilds seem to be in portage, but emerge says the're not >>> available. Any insight would be grearly apreciated. >>> >>> Kind regards cinder >>> >>>

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

--- alan.mckin...@gmail.com wrote: From: Alan McKinnon To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta Date: Fri, 4 Sep 2009 22:51:02 +0200 On Friday 04 September 2009 16:42:40 Willie Wong wrote: > On Fri, Sep 04, 2009 at 03:40:48PM +0200, P

[gentoo-user]

Wow! I made it! I'm in! Just installed my first Gentoo (Phew!). Its cool! I'm up to part 2 of the Gentoo Linux x86 Handbook "Working With Gentoo" and I've managed to install a few things, namely vim, links, and xorg-server (As per the Xorg server Configuration Guide) in addition the some essenti

Re: [gentoo-user]

Cinder Cinder wrote: Wow! I made it! I'm in! Just installed my first Gentoo (Phew!). Its cool! I'm up to part 2 of the Gentoo Linux x86 Handbook "Working With Gentoo" and I've managed to install a few things, namely vim, links, and xorg-server (As per the Xorg server

Re: [gentoo-user][SOLVED]emerge dev-python/python-dateutil-2.1 failed (compile phase)

, Cinder wrote: > I'm at a loss, as to how to solve this problem. Any advice would be > greatly appreciated > > # emerge --info '=dev-python/python-dateutil-2.1' > Portage 2.1.10.65 (default/linux/amd64/10.0/desktop, gcc-4.5.3, > gli

Re: [gentoo-user] media-gfx/blender-2.71 dependencies

uot;https://forums.gentoo.org/viewtopic-t-946824-start-0.html"; Yeah! What he said. "No, it means he needs to tell portage that 3.4 is available for ebuilds to build against. Confused? Yeah. me too." emerge =dev-lang/python-3.4 ? Why not? I've got three slots already. "SO I think the OP just needs to add this to make.conf: PYTHON_TARGETS="python2_7 python3_3 python3_4" and then tweak package.use if necessary" Okay, I see. Thank you so much. Soo so much. I thought I was going round the twist, or hopelesly ignorant. I couln't understand why emerge didn't offer me --autounmask-write, so I could dispatch-conf and move on. I was having similar problems with media-gfx/freecad and some others, but eselecting the apropriate target/slot thing made it go. Okay, that's it for today. My eys hurt. I'll do it in the morning. you guys are great. I'm going to bed. (Yawn) Cinder

Re: [gentoo-user] update broke X

g for help. [ 8532.166] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 8532.166] (EE) --- can...@gmail.com wrote: From: Canek Peláez Valdés To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] update broke X Date: Wed, 16 Jan

[gentoo-user] update broke X

Hello there! I updated my macbook pro 7,1 about a month ago and X broke. It has an nvidia 320M chipset(id:08a0) I have rebuilt the kernel modules. I have moved /etc/make.conf to /etc/portage/make.conf. I'm not sure if I need to split my xorg.conf into seperate xorg.conf.d entries. I haven't used

Re: [gentoo-user] update broke X

On Wed, Jan 16, 2013 at 8:17 PM, Cinder wrote: > Hello there! I updated my macbook pro 7,1 about a month ago and X broke. It > has an nvidia 320M chipset(id:08a0) I have rebuilt the kernel modules. I have > moved /etc/make.conf to /etc/portage/make.conf. I'm not sure if I need

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

--- alan.mckin...@gmail.com wrote: From: Alan McKinnon To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta Date: Fri, 4 Sep 2009 22:51:02 +0200 On Friday 04 September 2009 16:42:40 Willie Wong wrote: > On Fri, Sep 04, 2009 at 03:40:48PM +0200, P

[gentoo-user] emerge dev-python/python-dateutil-2.1 failed (compile phase)

I'm at a loss, as to how to solve this problem. Any advice would be greatly appreciated # emerge --info '=dev-python/python-dateutil-2.1' Portage 2.1.10.65 (default/linux/amd64/10.0/desktop, gcc-4.5.3, glibc-2.14.1-r3, 3.3.8-gentoo x86_64) ===

Re: [gentoo-user] emerge dev-python/python-dateutil-2.1 failed (compile phase)

On 08/14/2012 02:49 AM, Cinder wrote: > I'm at a loss, as to how to solve this problem. Any advice would be > greatly appreciated > > # emerge --info '=dev-python/python-dateutil-2.1' > Portage 2.1.10.65 (default/linux/amd64/10.0/desktop, gcc-4.5.3, > gli