Another problem with Systemimager 3.1.5 I keep getting segmentation faults when the client's udp-receiver is trying to copy the autoinstall script.
Possible problem with the initrd.img Attempted to run udp-receiver command manually from client and it fails with segmentation faults for the autoinstall_scripts. However, the flamethrower_directory and boot-i386-standard Were sent successfully. Any suggestions? Carlos Ar�valo hp HPTC Phone: 603-884-3390 Fax: 603-884-5191 E-mail: [EMAIL PROTECTED] -----Original Message----- From: dann frazier [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 27, 2003 12:52 PM To: Arevalo, Carlos Cc: Brian Elliott Finley; [EMAIL PROTECTED] Subject: Re: 3.1.5-1 rpms On Wed, Aug 27, 2003 at 11:44:54AM -0400, Arevalo, Carlos wrote: > Hello Dann, Brian, > > While trying to update systemimager rpm's from 3.1.4 to 3.1.5 I kept > going in circles avoiding dependencies. I could not find a clean way > to update the rpms. Is there such a way to update SI rpm's cleanly? > And if so, can that be documented? > > Using RedHat 7.3 with 2.4.20.x kernel. System: DL360 g3 > > > I used rpm -Uvh rpmNAME try rpm -Uvh <all rpm files> > I then, deleted/erase the rpm's from my imageserver avoiding > dependency errors, successfully, but when you delete the systemimager > rpm's, it also deletes the soft link for init.d in /etc > > /etc/init.d which should be pointing to /etc/rc.d/init.d, which after > deleting SI rpms is gone. Can this be fixed? yes. > Regards, > > Carlos Ar?valo > hp > HPTC > Phone: 603-884-3390 > Fax: 603-884-5191 > E-mail: [EMAIL PROTECTED] > > > -- --------------------------- dann frazier Hewlett-Packard Linux and Open Source Lab [EMAIL PROTECTED] (970) 898-0800 ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Sisuite-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-devel
