Andrey, > Sebastian who wrote the web interface was trying to make users go > through all the required fields to reduce the risk of misconfiguring > the network that would require low-level reflash, not possible with > just web interface (as the camera will obviously not be accessible > over the network), so you need to go through all of the network > settings fields in the interface - then the save button will be > enabled.
actually, this web interface resets the IP address, but not the gateway or the broadcast address. I was looking in /etc to find where these settings are saved, but didn't find then there.. where would I change these manually, via an ssh connection? Akos _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com