Is the switch port configured for tagging, or did you configure it to allow vlans 1-4 to talk to port 2? The VLAN setup in pfSense utilises 802.1q tagging, enabling vlans on a port doesn't necessarily configure that port for tagged frames.
--Bill On 9/29/05, alan walters <[EMAIL PROTECTED]> wrote: > > > > This might be off topic but I am flummoxed by the problem so I thought I > would ask. > > > > > > Configuration > > > > Pfsense > > > > Lan –with 3 vlans and lan as parent. > > > > Switch with vlan 1 through to 4 enabled > > > > Port 2 is setup on switch with all vlans and is plugged into lan on pfsense. > > > > Then the other ports are allocated to individual vlans. > > > > The communications across vlans looks fine on the switch itself(traffic > seems to only flow within members of the vlans) > > The switch is a 3com 3300xm > > > > Lan > > | > > | > > Port2 on > switch---------------------------------port 4 on switch > vlan 3------------------win XP > > | > > > | > > port 3 on switch vlan 2 > > | > > | > > WinXP
