no problem calibrating the machine
providing you have calibrated weights and time and patience also the machine is almost defiantly a beam balance with knife and planes so it may not work to well as these are probably worn you may only get it accurate to, 2 dec. places some were i have a manual if i can dig through all my stuff. if not i can give you basic instructions but it is not easy i worked as a service enginer on these type of machines and a calibration can take from 15 minutes to a couple of hours depending on how bad it is [Non-text portions of this message have been removed] Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Biofuels list archives: http://archive.nnytech.net/index.php?list=biofuel Please do NOT send Unsubscribe messages to the list address. To unsubscribe, send an email to: [EMAIL PROTECTED] Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/biofuel/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/