Hi Alex, I took a look at those rfxlink blip patches, it seems that a bit of work would be required to rebase them against master. I'd be interested in any progress that you make in that area, so please keep us in the loop as you progress :-)
Regards Michael On Thu, Aug 28, 2014 at 6:22 PM, Alex <mmz_tin...@yeah.net> wrote: > > OK, I see. Thanks for your help. Thanks a lot ! > > > > -- > > Best regards, > Alex. > > 在 2014-08-28 03:18:48，"András Bíró" <andras.b...@ucmote.com> 写道： > > Hi Alex, > > I reply you in-line > > > On Thu, Aug 28, 2014 at 4:41 AM, Alex <mmz_tin...@yeah.net> wrote: > >> >> Hi, Andris >> >> Thank you very very much for your kindly reply! But I do have >> something that I do not catch on. >> >> 1. which list should I search? do you mean by this mailing list? >> > > Yes, there was a lot of emails about it on tinyos-help. > > >> 2. what is rfxlink? is it a kind of technique or a hardware >> structure? Sorry that I could not access google. >> > > Not exactly, rfxlink is a chip-independent software radio stack in tinyos. > It was first implemented for rf230, but currently all Atmel radios (rf230, > rf212, rfa1), cc2420x and cc2520 uses this. You can find it at > tos/lib/rfxlink. > >> >> At the e-mail you sent later, you said "Blip1 worked with iris, but >> for a very short period. It was fixed a few months before blip2 was >> merged.". Where can I get the fixed one? In tinyos 2.1.2 ? It does not work >> in that way. >> > > No, I think blip2 is older than 2.1.2., probably 2.1.1 was the last > release with blip1. However, it is possible that rf230 support was only > added after 2.1.1, and removed with blip2 merge before 2.1.2 But you can > always check the history of the commits in the blip source files. > > Andris > >> -- >> >> Best regards, >> Alex. >> >> 在 2014-08-27 11:36:46，"András Bíró" <andras.b...@ucmote.com> 写道： >> >> Hi Alex, >> >> Blip doesn't work with any rfxlink radio, and the rf230 on iris uses >> rfxlink. There were patches about this, some of them seemed the work >> (search the list), but non of them was merged. >> >> Andris >> >> >> On Tue, Aug 26, 2014 at 3:36 AM, Alex <mmz_tin...@yeah.net> wrote: >> >>> Hi, anyone who cares >>> >>> Have you ever used blip with iris mote? I compiled the source in the >>> folder tinyos-2.x/support/sdk/c/blip, and it works well with micaz, but not >>> with iris. Has anyone transplanted the code to iris? or any solutions for >>> the problem below? >>> >>> user@user:/opt/tinyos-2.x/support/sdk/c/blip$ sudo driver/ip-driver >>> /dev/ttyUSB1 iris >>> 2014-08-05T15:47:12.778CST: INFO: Read config from 'serial_tun.conf' >>> 2014-08-05T15:47:12.778CST: INFO: Using channel 25 >>> 2014-08-05T15:47:12.778CST: INFO: Retries: 5 >>> 2014-08-05T15:47:12.779CST: INFO: telnet console server running on port >>> 6106 >>> 2014-08-05T15:47:12.798CST: INFO: created tun device: tun0 >>> 2014-08-05T15:47:18.085CST: FATAL: configuring interface failed! >>> aborting! >>> >>> -- >>> >>> Best regards, >>> Alex. >>> >>> >>> <#1481f5d0285e4bcb_1481a7f6fbcfe046_1480ff92d8d009a2_> >>> >>> >>> >>> _______________________________________________ >>> Tinyos-help mailing list >>> Tinyos-help@millennium.berkeley.edu >>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >>> >> >> >> >> <#1481f5d0285e4bcb_1481a7f6fbcfe046_> >> >> >> <#1481f5d0285e4bcb_1481a7f6fbcfe046_> > > > > > <#1481f5d0285e4bcb_> > > > <#1481f5d0285e4bcb_> > _______________________________________________ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
