While testing the beta candidate I noted the same issues that in previous
releases. The audio is played so low both in the in-built speakers and
through the headphones and the touch screen doesn't work at all.
This may help:
mobetri...@asusr2:~$ sudo lspci -v -nn | grep -A 7 Audio
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1753]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fea38000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
mobetri...@asusr2:~$ sudo lsusb -v -s 001:007
Bus 001 Device 007: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax
TouchScreen
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0eef D-WAV Scientific Co., Ltd
idProduct 0x0001 eGalax TouchScreen
bcdDevice 1.00
iManufacturer 1 eGalax Inc.
iProduct 2 USB TouchController
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 1 eGalax Inc.
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 2.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 178
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 3
Device Status: 0x0000
(Bus Powered)
Any help to make this work would be much appreciated.
Regards,
Javi
El 31 de marzo de 2009 14:12, Javier Gálvez Guerrero <
[email protected]> escribió:
> This worked. Thank you.
>
> Regards,
> Javi
>
> El 30 de marzo de 2009 18:06, Paul Larson <[email protected]>escribió:
>
> Javier Gálvez Guerrero wrote:
>> > Thank you, Javier,
>> >
>> > I've installed on an Asus R2 the current development branch version but
>> all
>> > windows are too big for the current display size (800x480) and I can't
>> > scroll down the screen to see the "Accept/Cancel" buttons and so on. How
>> can
>> > I do it?
>>
>> One thing you might try, is to hold the <alt> key then left-click and
>> hold somewhere in the window. In some cases, this will allow you to
>> move the window around to a better location.
>>
>
>
--
Ubuntu-mobile mailing list
[email protected]
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-mobile