Done. They have been filed as bugs
#352480<https://bugs.launchpad.net/netbook-remix/+bug/352480>and
#352487 <https://bugs.launchpad.net/netbook-remix/+bug/352487>.

Sorry if the bug description is not accurate enough, but I'm not used to
this. If you have any suggestion, it will be welcome =).


Regards,
Javi


El 31 de marzo de 2009 17:38, Paul Larson <[email protected]>escribió:

> Thank you very much for your testing Javier.  If you have not already
> done so, could you please go to https://bugs.launchpad.net/ and open a
> bug on these issues?
>
> Thanks,
> Paul Larson
>
> Javier Gálvez Guerrero wrote:
> > While testing the beta candidate I noted the same issues that in previous
> > releases. The audio is played so low both in the in-built speakers and
> > through the headphones and the touch screen doesn't work at all.
> >
> > This may help:
> >
> > mobetri...@asusr2:~$ sudo lspci -v -nn | grep -A 7 Audio
> > 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
> > Definition Audio Controller [8086:27d8] (rev 02)
> >     Subsystem: ASUSTeK Computer Inc. Device [1043:1753]
> >     Flags: bus master, fast devsel, latency 0, IRQ 16
> >     Memory at fea38000 (64-bit, non-prefetchable) [size=16K]
> >     Capabilities: [50] Power Management version 2
> >     Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0
> > Enable-
> >     Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
> >     Capabilities: [100] Virtual Channel <?>
> >
> > mobetri...@asusr2:~$ sudo lsusb -v -s 001:007
> >
> > Bus 001 Device 007: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax
> > TouchScreen
> > Device Descriptor:
> >   bLength                18
> >   bDescriptorType         1
> >   bcdUSB               1.10
> >   bDeviceClass            0 (Defined at Interface level)
> >   bDeviceSubClass         0
> >   bDeviceProtocol         0
> >   bMaxPacketSize0        64
> >   idVendor           0x0eef D-WAV Scientific Co., Ltd
> >   idProduct          0x0001 eGalax TouchScreen
> >   bcdDevice            1.00
> >   iManufacturer           1 eGalax Inc.
> >   iProduct                2 USB TouchController
> >   iSerial                 0
> >   bNumConfigurations      1
> >   Configuration Descriptor:
> >     bLength                 9
> >     bDescriptorType         2
> >     wTotalLength           34
> >     bNumInterfaces          1
> >     bConfigurationValue     1
> >     iConfiguration          1 eGalax Inc.
> >     bmAttributes         0xa0
> >       (Bus Powered)
> >       Remote Wakeup
> >     MaxPower              100mA
> >     Interface Descriptor:
> >       bLength                 9
> >       bDescriptorType         4
> >       bInterfaceNumber        0
> >       bAlternateSetting       0
> >       bNumEndpoints           1
> >       bInterfaceClass         3 Human Interface Device
> >       bInterfaceSubClass      0 No Subclass
> >       bInterfaceProtocol      0 None
> >       iInterface              0
> >         HID Device Descriptor:
> >           bLength                 9
> >           bDescriptorType        33
> >           bcdHID               2.10
> >           bCountryCode            0 Not supported
> >           bNumDescriptors         1
> >           bDescriptorType        34 Report
> >           wDescriptorLength     178
> >          Report Descriptors:
> >            ** UNAVAILABLE **
> >       Endpoint Descriptor:
> >         bLength                 7
> >         bDescriptorType         5
> >         bEndpointAddress     0x81  EP 1 IN
> >         bmAttributes            3
> >           Transfer Type            Interrupt
> >           Synch Type               None
> >           Usage Type               Data
> >         wMaxPacketSize     0x0008  1x 8 bytes
> >         bInterval               3
> > Device Status:     0x0000
> >   (Bus Powered)
> >
> >
> > Any help to make this work would be much appreciated.
> >
> > Regards,
> > Javi
> >
> > El 31 de marzo de 2009 14:12, Javier Gálvez Guerrero <
> > [email protected]> escribió:
> >
> >> This worked. Thank you.
> >>
> >> Regards,
> >> Javi
> >>
> >> El 30 de marzo de 2009 18:06, Paul Larson <[email protected]
> >escribió:
> >>
> >> Javier Gálvez Guerrero wrote:
> >>>> Thank you, Javier,
> >>>>
> >>>> I've installed on an Asus R2 the current development branch version
> but
> >>> all
> >>>> windows are too big for the current display size (800x480) and I can't
> >>>> scroll down the screen to see the "Accept/Cancel" buttons and so on.
> How
> >>> can
> >>>> I do it?
> >>> One thing you might try, is to hold the <alt> key then left-click and
> >>> hold somewhere in the window.  In some cases, this will allow you to
> >>> move the window around to a better location.
> >>>
> >>
> >
>
>
-- 
Ubuntu-mobile mailing list
[email protected]
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-mobile

Reply via email to