Thank you very much for your testing Javier. If you have not already done so, could you please go to https://bugs.launchpad.net/ and open a bug on these issues?
Thanks, Paul Larson Javier Gálvez Guerrero wrote: > While testing the beta candidate I noted the same issues that in previous > releases. The audio is played so low both in the in-built speakers and > through the headphones and the touch screen doesn't work at all. > > This may help: > > mobetri...@asusr2:~$ sudo lspci -v -nn | grep -A 7 Audio > 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller [8086:27d8] (rev 02) > Subsystem: ASUSTeK Computer Inc. Device [1043:1753] > Flags: bus master, fast devsel, latency 0, IRQ 16 > Memory at fea38000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable- > Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 > Capabilities: [100] Virtual Channel <?> > > mobetri...@asusr2:~$ sudo lsusb -v -s 001:007 > > Bus 001 Device 007: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax > TouchScreen > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x0eef D-WAV Scientific Co., Ltd > idProduct 0x0001 eGalax TouchScreen > bcdDevice 1.00 > iManufacturer 1 eGalax Inc. > iProduct 2 USB TouchController > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 34 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 1 eGalax Inc. > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 0 No Subclass > bInterfaceProtocol 0 None > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 2.10 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 178 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 3 > Device Status: 0x0000 > (Bus Powered) > > > Any help to make this work would be much appreciated. > > Regards, > Javi > > El 31 de marzo de 2009 14:12, Javier Gálvez Guerrero < > [email protected]> escribió: > >> This worked. Thank you. >> >> Regards, >> Javi >> >> El 30 de marzo de 2009 18:06, Paul Larson >> <[email protected]>escribió: >> >> Javier Gálvez Guerrero wrote: >>>> Thank you, Javier, >>>> >>>> I've installed on an Asus R2 the current development branch version but >>> all >>>> windows are too big for the current display size (800x480) and I can't >>>> scroll down the screen to see the "Accept/Cancel" buttons and so on. How >>> can >>>> I do it? >>> One thing you might try, is to hold the <alt> key then left-click and >>> hold somewhere in the window. In some cases, this will allow you to >>> move the window around to a better location. >>> >> > -- Ubuntu-mobile mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-mobile
