Hi Erwin,

Erwin Authried wrote:
I took a short look into the patch, it seems that
at91x40_gettimeoffset() in arch/arm/mach-at91/at91x40_time.c isn't
correct. It doesn't read from the right channel number. I have seen that

Yes, good catch, I'll fix that.


the timer routines are hardcoded for timer channel 1, formerly this was
configurable with "KERNEL_TIMER". This was quite helpful if the hardware
uses some of the timer in/outputs.

I'll look at that for the next iteration.

Thanks
Greg



Am Freitag, den 13.07.2007, 17:01 +1000 schrieb Greg Ungerer:
Hi All,

An update of the uClinux (MMU-less) code against 2.6.22.
Quite a few changes, some cleanup, some bug fixes.

http://www.uclinux.org/pub/uClinux/uClinux-2.6.x/linux-2.6.22-uc0.patch.gz

This is mostly m68knommu changes, and some ARM mmuless changes
I plan on pushing as well.


Change log:

. switch m68knommu to generic irq framework     Greg Ungerer
. convert ATMEL to ARM AT91x40 machine          Greg Ungerer
. uC5272 and uC5282 support                     David Wu
. Intec WildFire and WildFireMod support        Steve Bennett
. cleanup of m68knommu/kernel/setup.c           Greg Ungerer
. unify m68knommu builtin command line          Greg Ungerer
. print exception stack on m68knommu dump       Philippe De Muyter
. clean out m68knommu/kernel/mm                 Greg Ungerer
. platform setup code all coldfire platforms    Greg Ungerer
. more fec driver cleanups                      Philippe De Muyter
. fix type in m68knommu mcfdma.h                Philippe De Muyter


And by popular request here is a big patch that will bring a
stock 2.6.22 kernel up to a uClinux-dist 2.6.x level kernel:

http://www.uclinux.org/pub/uClinux/uClinux-2.6.x/linux-2.6.22-uc0-big.patch.gz

Regards
Greg



------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     [EMAIL PROTECTED]
SnapGear -- a division of Secure Computing  PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com






_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev


--
------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     [EMAIL PROTECTED]
SnapGear -- a Secure Computing Company      PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev

Reply via email to