Yes Axil, I am an RF engineer and I am aware of permalloy/supermalloy sheets used in EMI protection. These materials are added in sensitive instrument applications to shunt low frequency evanescent magnetic fields, not propagating RF EM fields. As I said, RF fields above about 1 kHz would be prevented from escaping from Rossi's hotCat by the hermetic stainless steel reactor enclosure acting as a Faraday cage. There will be no propagating RF escaping from the Rossi's reactor vessel. There is only the possibility of low frequency evanescent fields escaping.
Bob Higgins On Fri, Oct 3, 2014 at 9:11 AM, Axil Axil <janap...@gmail.com> wrote: > > http://webcache.googleusercontent.com/search?q=cache:http://aip.org/tip/INPHFA/vol-7/iss-5/p24.pdf > > *How does magnetic shielding work?* > All EMI shielding materials are manufac- > tured from high-permeability alloys that con- > tain about 80% nickel; the alloys vary in the > composition of their remaining metals. They > are usually fabricated as foils or sheets and > are baked at 2,000 °F in a dry hydrogen-rich > atmosphere to anneal them. Annealing sig- > nificantly improves a material’s attenuation, > that is, its ability to absorb and redirect mag- > netic fields. > > A shielding alloy works by diverting a > magnetic flux into itself. The alloy redirects > the magnetic flux away from the sensitive > object and returns it to the north–south > field. Although the field from a magnet is > greatly reduced by a shield plate, the protec- > tive alloy itself is attracted to the magnet, > but with no ill effects. Closed shapes are the > most efficient for magnetic shielding—cylin- > ders with caps, boxes with covers, and simi- > lar enclosed shapes are the most effective > (see figure). > > Magnetic shielding materials offer a very- > high-permeability path for magnetic field > lines to travel through, directing them > through the thickness of the shielding alloy > and keeping them from going where they > are not wanted. It is important that the > shield should offer a complete path for the > field lines, so that they do not exit the mate- > rial in a place where they will cause unin- > tended interference. > > *What is the difference between RF shield -* > *ing and magnetic shielding?* > > Ra d i o-frequency (RF) shielding is > required when it is necessary to block high- > frequency (100 kHz and above) interference > fields. RF shields typically use copper, alu- > minum, galvanized steel, or conductive rub- > b e r, plastic, or paints. These materials work > at high frequencies by means of their high > c o n d u c t i v i t y. Unlike magnetic shields that > use their high permeability to attract mag- > netic fields, RF shielding has little or no > magnetic permeability. However, when they > are properly engineered and constructed, > magnetic-shield alloys become broadband > shields that protect against both EMI and > RF interference. >
