The quality of the steam is not that important provided a method to accurately measure the amount of heat it contains is used. A COP of 11.07 is important and represents a significant improvement above the earlier specification of greater than 6. If you are concerned about the accuracy of the measurement then that is a different problem.
Dave -----Original Message----- From: Alan Fletcher <a...@well.com> To: vortex-l <vortex-l@eskimo.com> Sent: Thu, Nov 6, 2014 12:23 pm Subject: Re: [Vo]:New Rossi Patent Appln..publishes Today From: "Alan Fletcher" <a...@well.com> Sent: Thursday, November 6, 2014 8:41:48 AM > 600 is new - describing an assemblage of 18 reactors > This is used to generate STEAM --- the COP is reported as *** 11.07 *** No mention (that I can see) of steam quality or anything to measure it. [0196] Throughout the test, the temperatures of steam measured by the two probes have always been the same or very similar to each other. Throughout the test, the pressure of the steam was always equal to atmospheric pressure