A page in your DokuWiki was added or changed. Here are the details:
Date : 2016/12/14 19:20
Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101
Firefox/45.0
IP-Address : 78.43.90.159
Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481740604
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Prerequisites]
User : stefanbaur
@@ -13,4 +13,17 @@
==== Prerequisites ====
* You need an existing PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg
stuff. This is not covered here, though we might add a separate howto for that
some time later on.
* You need a Debian Jessie system to build the image. (Other distributions
based on Debian might work, but this is untested.)
* We suggest using a 64-Bit system, though it should be possible to use a
32-Bit system if you don't want to build a 64-Bit ThinClient image.
+ * Make sure your
package list is up to date by running: <code>sudo apt-get update </code>
+ * Install the required packages by running: <code>sudo apt-get install git-core
live-build live-config-doc live-manual-html live-boot-doc</code>
+
+ ==== Building your own netbootable X2Go-TCE image ====
+ === Starting the build ===
+ Change to a directory where you want to save your builds, and run the following
commands:<code>
+ DIR=./live-build-x2go-$(date +"%Y%m%d%H%M%S") # this will create a
timestamped subdirectory
+ mkdir -p $DIR
+ cd $DIR
+ lb config ...
+ lb build
+ lb clean # optional command to clean up afterwards -> saves some space
+ </code>
--
This mail was generated by DokuWiki at
http://wiki.x2go.org/
_______________________________________________
x2go-commits mailing list
x2go-commits@lists.x2go.org
http://lists.x2go.org/listinfo/x2go-commits