Miyako, It looks like you just step through all the objects and offset and print them, so I'm trying that... Alan
On Wed, Mar 13, 2019 at 1:16 PM Alan Tilson <alantil...@gmail.com> wrote: > Hello Miyako, > Ok, I'm back to this project. > Thanks for the info and I'm working with the Print Object command, trying > to anyway. > But it doesn't print subforms... > And you said I need 17R to convert an existing form to JSON...we're > running 17.0. > Any additional advice would be appreciated. > I'll try check out your component db to see how you did the labels. > Thanks, > Alan > > On Wed, Mar 6, 2019 at 7:41 PM Keisuke Miyako via 4D_Tech < > 4d_tech@lists.4d.com> wrote: > >> have you looked into the "Print object" command? >> >> you don't need to duplicate an object, >> you can print the same object as many times as you like, >> at any position (decimal, not integer positioning) >> >> with 17R you can define an object (JSON) representation of a form from >> scratch, >> or take an existing form, convert to JSON and add or subtract objects. >> >> > 2019/03/07 7:40、Alan Tilson <alantil...@gmail.com>のメール: >> > Any ideas would be appreciated! >> >> >> >> >> ********************************************************************** >> 4D Internet Users Group (4D iNUG) >> Archive: http://lists.4d.com/archives.html >> Options: https://lists.4d.com/mailman/options/4d_tech >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com >> ********************************************************************** > > ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **********************************************************************