I wrote: > Frank Smith wrote: >> HI All >> It seems I cannot use the select move/ranges to remove a small error >> in a guitar piece >> Was fine the other day. >> I assume I have set some global thing and it seems to want to snap to >> the guides only. >> As you guitarists will know the Telecaster is a buetiful osund but >> very noisy, so I usally remove >> any noise before the guitar solo. >> >> This time I cannot, any ideas please. >> >> Cheers >> Bob > > Your "regular" telecaster has single coils? If so, I'm using single > coils on my Ibanez Stratocaster like guitar too ... you need to avoid > any electric smog. Use your body to shield electro smog by your > monitor and any power supplies. You also could toggle 2 single coil > pick ups phase-shifted, but this would cancel the quality of the bass > sound. > > Is ground connected to the strings? For my guitar ground is connected > to the strings, this enables that the your buddy is able to shield.
PS: There are some issues, while the strings are connected to ground (usually single coil guitars do connect the strings to ground), the most important issue is, that you never ever should touch the strings of your guitar and at the same time any equipment having a opposite polarity!!! _______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
