Hi All Thanks for the help I eventually found the setting in View Snap to grid this seems to have been set. All done now!!
As regards noise I always leave whatever noise is in the file when the solo starts but always remove noise before the start As I have to sit quite close to the two DDX desks there is always a bit of noise. Once the guitar is under way its left alone with no EQ just volume. This I find allows the natural sound of the Tele to shine through. Again many thanks for your help Cheers Bob Blueslsd 2010/3/29 Tapani Sysimetsä <[email protected]> > Ralf Mardorf wrote: > > Tapani Sysimetsä wrote: > > > >> On 28/03/10 16:03, Frank Smith wrote: > >> > >> > >>> HI All > >>> It seems I cannot use the select move/ranges to remove a small error > >>> in a guitar piece > >>> Was fine the other day. > >>> I assume I have set some global thing and it seems to want to snap to > >>> the guides only. > >>> > >>> > >> Select "No Grid" from the menu under the primary clock? > >> > >> Tapani > >> > > > > Pardon, I just replied because of how to avoid noise for single coil > > guitars. Because of the topic this is my opinion: I wouldn't delete > > noise at passages were the guitar isn't played, if I have this problem I > > just fade out the noise a little bit. Noise could be too loud, but > > removing noise in passages were the guitar isn't played completely IMO > > isn't good. I do make noise in passages were the guitar isn't played > > less loud, but I don't cancel it completely, to avoid that there is a > > audible blending. Keep in mind that the noise also is audible when the > > guitar is played. Noise isn't bad at all cost. IMO it's better to keep > > some decreased noise also in passages were the guitar isn't played. > > > > Hi Ralf, you may well be right regarding the noise. Depends on the case > and what one wants. I just offered my 2 cents for the snapping problem, > no offense. > > Greetings, > > Tapani > _______________________________________________ > 64studio-users mailing list > [email protected] > http://lists.64studio.com/mailman/listinfo/64studio-users >
_______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
