To fix this problem, I deleted all AIX devices and ADSM and then re-add
each; cfgmgr on AIX then define drive in ADSM.
We had this problem when SCSI drives were swapped also. A lscfg -vl rmt1
will show the serial number of the tape drive, and AIX expects this to be
correct or you have got problems. You may also get errors in the actlog
indicating that ADSM expected a certain tape to be mounted, but a different
one was actually mount. You will usually get and AIX recovery logic
initiated by device though I am not sure if this is always the case.
Jeff Bach
Home Office Open Systems Engineering
Wal-Mart Stores, Inc.
WAL-MART CONFIDENTIAL
-----Original Message-----
From: Chris Gibes [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, July 10, 2001 12:35 PM
To: [EMAIL PROTECTED]
Subject: Re: Library Audit Unsuccessful
At 11:25 AM 7/10/01 -0400, you wrote:
>If i run a "audit library tekwolf checklabel=barcode" it completes
>successfully. It's when the audit actually mounts the volumes to
check the
>labels that it fails.
>
>any ideas?
I seem to remember a similar error happening to me. A vendor was in
to do
maintenance on the tape library and had inadvertently (!?) changed
the scsi
addresses of one of the drives. I've also seen this error when the
element
addresses of the drives was incorrect.
Chris
Chris Gibes <[EMAIL PROTECTED]>
Berbee- Milwaukee Branch
N14 W23822 Stone Ridge Dr.
Waukesha, WI 53188
(262) 521-5616
Berbee...putting the E in business
**********************************************************************
This email and any files transmitted with it are confidential
and intended solely for the individual or entity to
whom they are addressed. If you have received this email
in error destroy it immediately.
**********************************************************************
