It’s 120 foot tall 45G Tower. I’ve already purchased and had the pipe welded for planning on putting it in the holes on Monday if I can get the holes dug
Sent from my iPhone > On Sep 29, 2018, at 18:13, Lewis Bergman <[email protected]> wrote: > > I would strongly suggest you not use pipe. It had strong compressive > resistance but it is laterally weak. If you put much force on it if will > bend. I beam is the only way to go. You still haven't mentioned how tall or > the face size of this tower. > >> On Sat, Sep 29, 2018, 6:09 PM Mitch Koep <[email protected]> wrote: >> Craig >> >> Maybe a chain link fence next to the guy wires >> >> to the ground connection Extend fence out to the the point the guy wires >> is about >> >> 10 foot above ground??? >> >> We do that and use light weight orange fiber duct on the guy wires to >> the ground lug >> >> Mitch >> >> >> On 9/29/2018 3:15 PM, Craig House wrote: >> > Yes. Elevated guy supports. The location is an atv off road ranch and >> > they are worried about people getting clothes lined. >> > >> > Sent from my iPhone >> > >> >> On Sep 29, 2018, at 15:05, <[email protected]> <[email protected]> wrote: >> >> >> >> 10 foot tall wooden poles for an aerial attachment only need to be set >> >> maybe >> >> 4 feet deep. >> >> >> >> Or are you talking about elevated supports for guy wires? >> >> If so, you probably need to dig a trench for an L shaped sleeper and the >> >> some rebar in sonotube for the poles and anchors. >> >> >> >> -----Original Message----- >> >> From: Craig House >> >> Sent: Saturday, September 29, 2018 12:55 PM >> >> To: [email protected] >> >> Subject: [AFMUG] Anchor holes >> >> >> >> >> >> I have a tower construction location which is going to require 10 foot >> >> poles >> >> above ground as an attachment point for the wires at each of the holes. I >> >> have the pipes constructed but I’m concerned about being able to drill the >> >> holes in our soil and ground to accommodate the pipes. Has anyone done >> >> something like this before I’m not looking to do typical anchor holes that >> >> are 6 feet or 8 feet wide and a foot and a half across I’m looking for an >> >> auger hole that is a straight 6 to 7 feet down >> >> >> >> Sent from my iPhone >> >> Sent from my iPhone >> >> -- >> >> AF mailing list >> >> [email protected] >> >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> >> >> -- >> >> AF mailing list >> >> [email protected] >> >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
