We power nearly all of our CCR's directly off of a +48VDC rail (at least 1009 are 48VDC). We either attach directly to the PCB on the CCR or use a little barrel connector, crimp a wire to it and feed it directly to our DC rail.
On Fri, Oct 26, 2018 at 3:06 PM SmarterBroadband <[email protected]> wrote: > Is anyone powering Mikrotik CCR routers from DC. It looks like if you > pull the included AC PSU it feeds the Tik with 24volt DC. So can we just > remove the supply and feed the tik from a 24v DC supply? Anyone doing > this? Anyone know what the make / model of plug on the PSU? > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
