Are you running in eptp mode or TDD PTP? Or ptmp/wifi.... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Tue, Dec 4, 2018 at 10:33 AM Brandon Yuchasz <[email protected]> wrote: > Dave, > > I have not seems like such a strange issue I didn’t have much faith in > tech support. My experience is the list seems to have better info on these > odd issues. One side of this link requires snow shoes to get to so I am > trying to avoid replacement if at all possible. > > > > Thanks, > > Brandon > > > > > > *From:* AF [mailto:[email protected]] *On Behalf Of *Dave > *Sent:* Tuesday, December 04, 2018 8:01 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] odd Force 200 backhaul issues. > > > > Have you placed a support request to cambium yet? > https://support.cambiumnetworks.com/ > > On 12/3/18 7:53 PM, Brandon Yuchasz wrote: > > Looking to see if anyone has experienced a similar issue to this: > > We have a force 200 backhaul on a small bridged network. > > Several times a day now it stops passing most traffic. It can be humming > along at 25mbps down and 5mbps upload and then drop down to 2mbps download > and less than 1mbps upload. > > Downlink RSSI -65 dBm > > Downlink SRN 30 dB > > Uplink MCS MCS 14 > > Downlink MCS MCS15 > > All remains constant during this time. > > > > The ping falls apart during this time between the AP and the SM although > pings through the network to the SM or through the network from the AM are > both fine it’s just between them that starts to drop packets. > > > > The units show heavy retransmission packets from the moment the link is > brought online around 40% at times. > > > > At this point I would assume noise is the issue. > > > > *But here is the odd part I would like some help with*. Rebooting the > link fixes the issue but leaving the link alone does not. It will stay > “broken” until one or both sides of the link are rebooted. Then it works > perfectly for a time and falls apart again. > > > > Current firmware is 3.5.1 but we have run it on 2.6.1.1 and 3.3 with > similar results. > > > > > > Any thoughts on how to troubleshot this one would be awesome. > > > > Best Regards. > > Brandon Yuchasz > > > > > > > > > > > > > > -- > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
