I may mave missed it, but what freq/channel are you on at what size? On Thu, Dec 6, 2018 at 1:16 PM Josh Luthman <[email protected]> wrote:
> My eptp link was 2.4.3 with the issue for sure > > I had a ptmp AP (flexible) 2.5.1 that had an issue where no one could > associate until I rebooted > > I would think in 2.6.x it was resolved. I haven't seen any issues myself > since 2.6.x. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Wed, Dec 5, 2018 at 5:09 PM Brandon Yuchasz <[email protected]> > wrote: > >> Josh, >> >> Was the bug in 2.6.1.x? I will certainly upgrade but just wondering how >> long this has been around. >> >> >> >> Thanks everyone. >> >> >> >> >> >> *From:* AF [mailto:[email protected]] *On Behalf Of *Josh Luthman >> *Sent:* Wednesday, December 05, 2018 9:11 AM >> *To:* AFMUG >> *Subject:* Re: [AFMUG] odd Force 200 backhaul issues. >> >> >> >> There was a bug that caused it to hang way back in the day (when the >> Force 200 and eptp came out). They patched my link and it quit dying >> entirely, but I think it was some quick reset. >> >> There's a known bug in 3.5.1 that's semi-resolved in 3.5.2 relating to >> this, but it is not 100% fixed from what I'm told. Upgrade to 3.5.2 and >> when there's a new release you'll want to upgrade when you can. >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> >> >> On Tue, Dec 4, 2018 at 11:58 PM Mathew Howard <[email protected]> >> wrote: >> >> I've seen that happen before, but I can't remember what we did to fix >> it... I think we may have had to replace the radio. I can't remember if it >> was a PTP or PTMP situation, either... it was a while ago. >> >> >> >> It might be worth switching it to TDD PTP mode instead, and see if that >> helps. >> >> >> >> On Tue, Dec 4, 2018 at 10:14 PM Brandon Yuchasz <[email protected]> >> wrote: >> >> Yes de-registering the link does make the link start passing traffic >> again although it seems a lot shorter lived so far. Only lasted an hour. >> >> >> >> *From:* AF [mailto:[email protected]] *On Behalf Of *Brandon >> Yuchasz >> *Sent:* Tuesday, December 04, 2018 7:56 PM >> *To:* 'AnimalFarm Microwave Users Group' >> *Subject:* Re: [AFMUG] odd Force 200 backhaul issues. >> >> >> >> I don’t know. I will report back after trying it. >> >> Thanks for the idea. >> >> >> >> >> >> *From:* AF [mailto:[email protected]] *On Behalf Of *Mathew Howard >> *Sent:* Tuesday, December 04, 2018 4:02 PM >> *To:* AFMUG >> *Subject:* Re: [AFMUG] odd Force 200 backhaul issues. >> >> >> >> Does it start working again if you just de-register the link, instead of >> rebooting the radio(s)? >> >> >> >> On Tue, Dec 4, 2018 at 9:33 AM Brandon Yuchasz <[email protected]> >> wrote: >> >> Dave, >> >> I have not seems like such a strange issue I didn’t have much faith in >> tech support. My experience is the list seems to have better info on these >> odd issues. One side of this link requires snow shoes to get to so I am >> trying to avoid replacement if at all possible. >> >> >> >> Thanks, >> >> Brandon >> >> >> >> >> >> *From:* AF [mailto:[email protected]] *On Behalf Of *Dave >> *Sent:* Tuesday, December 04, 2018 8:01 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] odd Force 200 backhaul issues. >> >> >> >> Have you placed a support request to cambium yet? >> https://support.cambiumnetworks.com/ >> >> On 12/3/18 7:53 PM, Brandon Yuchasz wrote: >> >> Looking to see if anyone has experienced a similar issue to this: >> >> We have a force 200 backhaul on a small bridged network. >> >> Several times a day now it stops passing most traffic. It can be humming >> along at 25mbps down and 5mbps upload and then drop down to 2mbps download >> and less than 1mbps upload. >> >> Downlink RSSI -65 dBm >> >> Downlink SRN 30 dB >> >> Uplink MCS MCS 14 >> >> Downlink MCS MCS15 >> >> All remains constant during this time. >> >> >> >> The ping falls apart during this time between the AP and the SM although >> pings through the network to the SM or through the network from the AM are >> both fine it’s just between them that starts to drop packets. >> >> >> >> The units show heavy retransmission packets from the moment the link is >> brought online around 40% at times. >> >> >> >> At this point I would assume noise is the issue. >> >> >> >> *But here is the odd part I would like some help with*. Rebooting the >> link fixes the issue but leaving the link alone does not. It will stay >> “broken” until one or both sides of the link are rebooted. Then it works >> perfectly for a time and falls apart again. >> >> >> >> Current firmware is 3.5.1 but we have run it on 2.6.1.1 and 3.3 with >> similar results. >> >> >> >> >> >> Any thoughts on how to troubleshot this one would be awesome. >> >> >> >> Best Regards. >> >> Brandon Yuchasz >> >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> *Error! Filename not specified.* >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
