Try latest firmware as well 3.5.2
On Tue, Dec 4, 2018 at 8:46 AM Josh Luthman <[email protected]> wrote: > Are you running in eptp mode or TDD PTP? Or ptmp/wifi.... > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Tue, Dec 4, 2018 at 10:33 AM Brandon Yuchasz <[email protected]> > wrote: > >> Dave, >> >> I have not seems like such a strange issue I didn’t have much faith in >> tech support. My experience is the list seems to have better info on these >> odd issues. One side of this link requires snow shoes to get to so I am >> trying to avoid replacement if at all possible. >> >> >> >> Thanks, >> >> Brandon >> >> >> >> >> >> *From:* AF [mailto:[email protected]] *On Behalf Of *Dave >> *Sent:* Tuesday, December 04, 2018 8:01 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] odd Force 200 backhaul issues. >> >> >> >> Have you placed a support request to cambium yet? >> https://support.cambiumnetworks.com/ >> >> On 12/3/18 7:53 PM, Brandon Yuchasz wrote: >> >> Looking to see if anyone has experienced a similar issue to this: >> >> We have a force 200 backhaul on a small bridged network. >> >> Several times a day now it stops passing most traffic. It can be humming >> along at 25mbps down and 5mbps upload and then drop down to 2mbps download >> and less than 1mbps upload. >> >> Downlink RSSI -65 dBm >> >> Downlink SRN 30 dB >> >> Uplink MCS MCS 14 >> >> Downlink MCS MCS15 >> >> All remains constant during this time. >> >> >> >> The ping falls apart during this time between the AP and the SM although >> pings through the network to the SM or through the network from the AM are >> both fine it’s just between them that starts to drop packets. >> >> >> >> The units show heavy retransmission packets from the moment the link is >> brought online around 40% at times. >> >> >> >> At this point I would assume noise is the issue. >> >> >> >> *But here is the odd part I would like some help with*. Rebooting the >> link fixes the issue but leaving the link alone does not. It will stay >> “broken” until one or both sides of the link are rebooted. Then it works >> perfectly for a time and falls apart again. >> >> >> >> Current firmware is 3.5.1 but we have run it on 2.6.1.1 and 3.3 with >> similar results. >> >> >> >> >> >> Any thoughts on how to troubleshot this one would be awesome. >> >> >> >> Best Regards. >> >> Brandon Yuchasz >> >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
