Yeah...it's at a university so needs to look "professional". On Fri, Feb 22, 2019 at 4:00 PM Adam Moffett <[email protected]> wrote:
> Does the nanostation still have slots for hose-clamps? > > slip a 4" length of galvanized pipe strap through the slot and screw that > to the wall. It will never get closer to the wall than that. > > > On 2/22/2019 4:54 PM, Cameron Crum wrote: > > I think that still sicks out a little too far. I need something like 2-3 > inches from the wall. > > On Fri, Feb 22, 2019 at 3:52 PM <[email protected]> wrote: > >> Some folks use these: >> https://www.mccowntech.com/product/horizontal-member-tower-mount-6-inch/ >> >> I guess we could spin one without the bolts and back clamp. Disk only. >> >> *From:* Cameron Crum >> *Sent:* Friday, February 22, 2019 2:33 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* [AFMUG] mtow suitable? >> >> I'm looking for something like the mtow but for wall mounting a cpe. It >> needs to be pretty low profile as it is in a breeze way and they want it as >> close to the wall as possible and invisible as possible. It will be use to >> mount a Nanostation AC. Chuck, do you have a low profile one or is there >> something else suitable? >> >> Cameron >> >> ------------------------------ >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
