From: AF <[email protected]> On Behalf Of Mathew Howard Sent: Friday, February 22, 2019 6:54 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] mtow suitable? If you were to use a NanoBeam instead of a NanoStation, the mount is supposed to be able to screw directly to a wall. I've never actually tried that, so I don't know how well it works, but it's supposed to work... On Fri, Feb 22, 2019 at 3:56 PM Cameron Crum <[email protected] <mailto:[email protected]> > wrote: I think that still sicks out a little too far. I need something like 2-3 inches from the wall. On Fri, Feb 22, 2019 at 3:52 PM <[email protected] <mailto:[email protected]> > wrote: Some folks use these: https://www.mccowntech.com/product/horizontal-member-tower-mount-6-inch/ I guess we could spin one without the bolts and back clamp. Disk only. From: Cameron Crum Sent: Friday, February 22, 2019 2:33 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] mtow suitable? I'm looking for something like the mtow but for wall mounting a cpe. It needs to be pretty low profile as it is in a breeze way and they want it as close to the wall as possible and invisible as possible. It will be use to mount a Nanostation AC. Chuck, do you have a low profile one or is there something else suitable? Cameron _____ -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
