If you were to use a NanoBeam instead of a NanoStation, the mount is supposed to be able to screw directly to a wall. I've never actually tried that, so I don't know how well it works, but it's supposed to work...
On Fri, Feb 22, 2019 at 3:56 PM Cameron Crum <[email protected]> wrote: > I think that still sicks out a little too far. I need something like 2-3 > inches from the wall. > > On Fri, Feb 22, 2019 at 3:52 PM <[email protected]> wrote: > >> Some folks use these: >> https://www.mccowntech.com/product/horizontal-member-tower-mount-6-inch/ >> >> I guess we could spin one without the bolts and back clamp. Disk only. >> >> *From:* Cameron Crum >> *Sent:* Friday, February 22, 2019 2:33 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* [AFMUG] mtow suitable? >> >> I'm looking for something like the mtow but for wall mounting a cpe. It >> needs to be pretty low profile as it is in a breeze way and they want it as >> close to the wall as possible and invisible as possible. It will be use to >> mount a Nanostation AC. Chuck, do you have a low profile one or is there >> something else suitable? >> >> Cameron >> >> ------------------------------ >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
