Yup we still sell the “Zirkel mounts” and [email protected] is the best contact for orders.
-Sean On Fri, Feb 22, 2019 at 3:44 PM Ken Hohhof <[email protected]> wrote: > If it’s literally just a Nanostation AC (we use the Locos which are even > smaller), we typically use what we call a “Zirkel mount” because it comes > from Zirkel Wireless. Not sure if [email protected] is still the right > contact. I think they were around $15 each in 50 qty so not super cheap, > but the installers like that you can mount them various ways on siding, > fascia, etc. and adjust azimuth and elevation to aim it. > > > > We also put 450b mid-gain SMs on them, but anything bigger like a Stinger > or a CLIP may have too much windload and eventually break the plastic mount. > > > > *From:* AF <[email protected]> *On Behalf Of *Steve Jones > *Sent:* Friday, February 22, 2019 4:17 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] mtow suitable? > > > > the mtowP is lagged to alot of walls around here, just the half with the > piece of pipe welded to it. > > > > On Fri, Feb 22, 2019 at 4:10 PM Cameron Crum <[email protected]> wrote: > > Yeah...it's at a university so needs to look "professional". > > > > On Fri, Feb 22, 2019 at 4:00 PM Adam Moffett <[email protected]> wrote: > > Does the nanostation still have slots for hose-clamps? > > slip a 4" length of galvanized pipe strap through the slot and screw that > to the wall. It will never get closer to the wall than that. > > On 2/22/2019 4:54 PM, Cameron Crum wrote: > > I think that still sicks out a little too far. I need something like 2-3 > inches from the wall. > > > > On Fri, Feb 22, 2019 at 3:52 PM <[email protected]> wrote: > > Some folks use these: > > https://www.mccowntech.com/product/horizontal-member-tower-mount-6-inch/ > > > > I guess we could spin one without the bolts and back clamp. Disk only. > > > > *From:* Cameron Crum > > *Sent:* Friday, February 22, 2019 2:33 PM > > *To:* AnimalFarm Microwave Users Group > > *Subject:* [AFMUG] mtow suitable? > > > > I'm looking for something like the mtow but for wall mounting a cpe. It > needs to be pretty low profile as it is in a breeze way and they want it as > close to the wall as possible and invisible as possible. It will be use to > mount a Nanostation AC. Chuck, do you have a low profile one or is there > something else suitable? > > > > Cameron > ------------------------------ > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
