I don't know what Gino's reason is but I sold my WISP. I have some spares laying around still. No idea if they are good fit any longer for any particular purpose. I can only say they worked well at the time.
On Tue, Apr 9, 2019 at 9:02 PM Carl Peterson <cpeter...@portnetworks.com> wrote: > Mike, > > Any idea how to get QinQ VLANs + a couple other non QinQ VLANs to trunk > between two ignite switches? For the life of me I can't make it work. > Per their manual it is > switchport dot1q-tunnel mode uplink > On one switch and then the upstream switch is just a trunk port allowing > that SVLAN but it doesn't work. Works fine for one switch connected to a > Siklu, but trying to connect a second switch to the first switch and > getting it to pass the SVLAN just won't work. (like their example around > page 529) > > Also tried just making them regular trunk ports (since we run a second > 0x8100 tag) but that doesn't work either. > > > On Tue, Apr 9, 2019 at 5:59 PM Mike Hammett <af...@ics-il.net> wrote: > >> Try a Mikrotik switch if you think the IgniteNet is bad. >> >> I had no problem figuring out VLANs on IgniteNet. *shrugs* >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions <http://www.ics-il.com/> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> Midwest Internet Exchange <http://www.midwest-ix.com/> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> The Brothers WISP <http://www.thebrotherswisp.com/> >> <https://www.facebook.com/thebrotherswisp> >> >> >> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >> ------------------------------ >> *From: *"Carl Peterson" <cpeter...@portnetworks.com> >> *To: *"AnimalFarm Microwave Users Group" <af@af.afmug.com> >> *Sent: *Tuesday, April 9, 2019 11:42:44 AM >> *Subject: *Re: [AFMUG] SFP Switch recomendation >> >> We are using a few Ignite fusion fiber switches. Big complaint is that >> there is some strange incompatibility with 844GEs where it will sometimes >> cause the 844GE to reset its WAN VLAN settings if the ignite switch gets >> power cycled. Not sure if this has anything to do with ignite, but it >> doesn't happen with any other switch we have tried. >> >> VLAN settings are also mind bogglingly stupid. It can do most things >> except adding two tags, but the way it is configured makes zero sense. >> >> Power/heat and dimensions are all good. >> >> On Mon, Apr 8, 2019 at 12:23 PM Steve Jones <thatoneguyst...@gmail.com> >> wrote: >> >>> We primarily use the HP Procurve J9803A (I think theyre called Office >>> Connect or something now) With LACP for bonding our 2+0 SAF links. We have >>> a site going in that will have three bonded links so I need at least 6 SFP. >>> The new name of these also changed the corm factor, theyre deeper and wont >>> fit in some of our enclosures. >>> >>> We dont do much with our switches beyond VLAN and LACP. >>> >>> Whats a comparable option with the less then 10 inch depth but still >>> rackmount that wont take issue with HP LACP on the other side of the link >>> if that matters? Ive heard good/bad on the mikrotik switches. These >>> currently only need up to 2gbps aggregate, but that will probably change >>> over time. Im not opposed to full SFP, but on our CCR we have a coup SFP >>> gigabit copper that are flaky, I dont know if thats a mikrotik thing or a >>> copper SFP thing >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> >> Carl Peterson >> >> *PORT NETWORKS* >> >> 401 E Pratt St, Ste 2553 >> >> Baltimore, MD 21202 >> >> (410) 637-3707 >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Lewis Bergman 325-439-0533 Cell
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
