Yeah, and I was dumbfounded, he was talking stuff like "what's the iperf
numbers for your network" I was thinking he had a clue, but somewhere
he fell into the IFM trap... When he said there wasn't an ethernet
anywhere, I think my jaw actually dropped because he gave me a look.
On 09/11/2020 04:44 PM, Ken Hohhof wrote:
Unbelievable.
As I was reading your email I was waiting for the part where he prewired the
house with Cat6 or fiber to every room with wall outlet or ceiling WiFi6 APs in
every room. Oops.
I'm not a big fan of powerline networking as a primary solution. To fill a
deadspot, sure.
-----Original Message-----
From: AF <af-boun...@af.afmug.com> On Behalf Of Robert Andrews
Sent: Friday, September 11, 2020 5:26 PM
To: af@af.afmug.com
Subject: Re: [AFMUG] Yunlink router?
We had a customer the other day have us come out to look at his new
house for a future install. The whole house is e-glass and concrete.
Interior as well as exterior walls. New concrete is wet. Between the
concrete and the eglass he had built a wifi proof blockhouse. I showed
him how bad the attenuation was from a phone set as a hotspot to another
phone in another room. Yeah he's going to be praying at the alter of
ethernet over powerlines because he put ZERO cat5 in during construction
figuring he was going to mesh the whole place.. Phone in 5 Ghz there
was barely a signal at all.. -85 from one room to another.. They all are
experts now. The most dangerous person in the world is someone with just a
little tech knowledge...
On 09/11/2020 12:22 PM, Ken Hohhof wrote:
When we deploy premise routers with SFP ports, customers could care
less. Only one has ever been used, and that’s at a business customer
where we used a direct attach cable to a POE switch for their VoIP phones.
All customers want any more is WiFi. Nobody wants Ethernet. Or fiber.
What they call “hardwired” or “Earth Net”.
*From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Carl Peterson
*Sent:* Friday, September 11, 2020 2:10 PM
*To:* AnimalFarm Microwave Users Group <af@af.afmug.com>
*Subject:* Re: [AFMUG] Yunlink router?
With an SFP port?!
On Fri, Sep 11, 2020 at 1:27 PM Bill Prince <part15...@gmail.com
<mailto:part15...@gmail.com>> wrote:
Theese seems to bee thee one:
https://yuncore.en.alibaba.com/
bp
<part15sbs{at}gmail{dot}com>
On 9/11/2020 11:14 AM, Ken Hohhof wrote:
MAC address. So yes, could be OEM. But I asked the tech who
did the install about a week ago and he said the router name was
either Yunlink or something similar. He said that he’s seen one
more recently.
*From:* AF <af-boun...@af.afmug.com>
<mailto:af-boun...@af.afmug.com> *On Behalf Of *Nate Burke
*Sent:* Friday, September 11, 2020 1:05 PM
*To:* AnimalFarm Microwave Users Group <af@af.afmug.com>
<mailto:af@af.afmug.com>
*Subject:* Re: [AFMUG] Yunlink router?
Is that what the router actually says, or just what the MAC is
registered to?
On 9/11/2020 12:54 PM, Ken Hohhof wrote:
Anybody else encountered a Yunlink router?
Where do customers find these things? Are they shopping on
Alibaba? I can’t find Yunlink for sale on Amazon or
anywhere else. We’ve got a new customer with an open DNS
resolver and telnet interface. I figure it’s just a matter
of time before the DNS server gets exploited for an
amplification attack.
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Carl Peterson
*PORT NETWORKS*
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
