While it does not support snmp they may work https://iotawatt.com/# I use it with infuxdb and home assistant. It will support up to 14 ct clamps.
On Wed, Dec 16, 2020, 6:12 PM Nate Burke <[email protected]> wrote: > Since the Demise of the UBNT MFI, what's out there for easy current > monitoring for AC Circuits. Drop some clamps on wires at the panel and > read them via SNMP. > > I have an Accuenergy device on the Mains of the panel, but their > products seem to be more for mains applications, not individual > circuits. I don't really even care about voltage or power or metering. > Really what I want to see is how often my Aircon unit cycles on and > off. The unit isn't smart enough to tell me how often it runs, and it > doesn't make enough extra load on the mains meter to see it above the > normal draw. So I want to clamp a set of meters right on that circuit > so I can see when it cycles the compressor on and off. > > I'm still using MFI on another system, and it's still plugging away and > giving me good data. So if UBNT was able to do it, I'm guessing someone > else can do it on the cheap too. > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
