Forrest... has anyone seen forrest? On Wed, Dec 16, 2020, 6:05 PM Zach Underwood <[email protected]> wrote:
> While it does not support snmp they may work https://iotawatt.com/# I use > it with infuxdb and home assistant. It will support up to 14 ct clamps. > > On Wed, Dec 16, 2020, 6:12 PM Nate Burke <[email protected]> wrote: > >> Since the Demise of the UBNT MFI, what's out there for easy current >> monitoring for AC Circuits. Drop some clamps on wires at the panel and >> read them via SNMP. >> >> I have an Accuenergy device on the Mains of the panel, but their >> products seem to be more for mains applications, not individual >> circuits. I don't really even care about voltage or power or metering. >> Really what I want to see is how often my Aircon unit cycles on and >> off. The unit isn't smart enough to tell me how often it runs, and it >> doesn't make enough extra load on the mains meter to see it above the >> normal draw. So I want to clamp a set of meters right on that circuit >> so I can see when it cycles the compressor on and off. >> >> I'm still using MFI on another system, and it's still plugging away and >> giving me good data. So if UBNT was able to do it, I'm guessing someone >> else can do it on the cheap too. >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
