No he's just so buried under year end, and onboarding new employees, and a whole bunch of other crap that he's not watching the lists like normal.
In re the original thread, there are a couple commercial tranducers I plan on directly supporting at some point, maybe these new employees will eventually make my load less.... On Wed, Dec 16, 2020 at 7:01 PM Steve Jones <[email protected]> wrote: > Did forrest die? > > On Wed, Dec 16, 2020, 7:45 PM Chuck McCown via AF <[email protected]> wrote: > >> Site monitor with a clamp on current transformer, >> >> Sent from my iPhone >> >> > On Dec 16, 2020, at 4:11 PM, Nate Burke <[email protected]> wrote: >> > >> > Since the Demise of the UBNT MFI, what's out there for easy current >> monitoring for AC Circuits. Drop some clamps on wires at the panel and >> read them via SNMP. >> > >> > I have an Accuenergy device on the Mains of the panel, but their >> products seem to be more for mains applications, not individual circuits. >> I don't really even care about voltage or power or metering. Really what I >> want to see is how often my Aircon unit cycles on and off. The unit isn't >> smart enough to tell me how often it runs, and it doesn't make enough extra >> load on the mains meter to see it above the normal draw. So I want to >> clamp a set of meters right on that circuit so I can see when it cycles the >> compressor on and off. >> > >> > I'm still using MFI on another system, and it's still plugging away and >> giving me good data. So if UBNT was able to do it, I'm guessing someone >> else can do it on the cheap too. >> > >> > -- >> > AF mailing list >> > [email protected] >> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- - Forrest
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
