Site monitor with a clamp on current transformer, Sent from my iPhone
> On Dec 16, 2020, at 4:11 PM, Nate Burke <[email protected]> wrote: > > Since the Demise of the UBNT MFI, what's out there for easy current > monitoring for AC Circuits. Drop some clamps on wires at the panel and read > them via SNMP. > > I have an Accuenergy device on the Mains of the panel, but their products > seem to be more for mains applications, not individual circuits. I don't > really even care about voltage or power or metering. Really what I want to > see is how often my Aircon unit cycles on and off. The unit isn't smart > enough to tell me how often it runs, and it doesn't make enough extra load on > the mains meter to see it above the normal draw. So I want to clamp a set of > meters right on that circuit so I can see when it cycles the compressor on > and off. > > I'm still using MFI on another system, and it's still plugging away and > giving me good data. So if UBNT was able to do it, I'm guessing someone else > can do it on the cheap too. > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
