Juniper. We have a MX5 in production and a MX204 I'm setting up right now to replace it. Subscriber management is additional licensing. Not sure if just dynamic interface creation requires subscriber management licensing. I just looked on our production BNG and it isn't using subscriber-vlan.
subscriber-accounting 1 1 0 permanent subscriber-authentication 0 1 0 permanent subscriber-address-assignment 1 1 0 permanent subscriber-vlan 0 1 0 permanent https://www.juniper.net/documentation/en_US/junose15.1/topics/concept/dynamic-interfaces-overview.html On Fri, Jun 18, 2021 at 12:34 PM D. Bernardi <[email protected]> wrote: > At 12:35 PM 6/18/2021, Carl Peterson wrote: > >We've gone full circle - Flat to fully routed to > >MPLS/VPLS over a routed network back to > >flat. You hit a scaling issue with routed > >networks as you hit 10G and above, especially if > >you aren't using Mikrotik or other low cost > >routing. Real carrier grade switching is a lot > >lower cost, lower power, and much easier to manage.  > > > >Every customer has their own dedicated circuit > >(SVLAN.CVLAN). The corresponding interface on > >the BNG is dynamically created for the > >subscriber with attributes out of radius.  > >Something like this isn't the right answer at > >100 customers but you should consider it or > >something like it once you go north of a few k subs.  > > > What are you using for the BNG and does it > require an additional license for dynamic interface creation? > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
