Every single time I have to play "find the mac address that the system actually accepts" I have genuine feelings of hatred...
Bought 2 APs within the last 6 months, neither mac works... On Mon, Sep 22, 2014 at 11:38 AM, canopy01 via Af <[email protected]> wrote: > Folks, > > > > PMP Beta load 13.2 Build 30 is now available for download and you can find > it here: > > > > https://support.cambiumnetworks.com/files/pmp450 > > > > - Improvements for MIMO-A > - PMP450 APs & SMs will now default to MIMO-A control message mode > - If you have an interop sector (containing 430 SMs), you may need > to set this back to legacy SISO mode > - Configuration -> Radio -> PMP 430 Interop Mode, set to SISO > - This is only necessary if you have issues with existing > PMP430’s reconnecting and should not be necessary in a majority of > the > cases. > - Fix for missing "None" frequency option > - Control Slots is now called Contention Slots > - Addition of "Color Code Priority" column to the Session Status -> > Session tab > - If Color Code Rescan option is enabled on the AP, and an SM is > registered via a non-primary color code, there will be a countdown for > each > SM that will be rescanning due to this configuration. > - If an SM is registered via Installation Color Code (ICC), this > will also be noted on the Session Status -> Device tab, Session column, > next to "In Session" > - Added number of VCs in use next to Subscriber Count on the AP's main > page. This number includes Broadcast and Multicast (if enabled) VCs. > - Added support to NAT to handle fragments (to fix the FemtoCell issue) > - Alignment tone fix > - Various bug fixes > > > > > > Corey > > > > >
